All Carnegie Library of Pittsburgh locations will be closed on Monday, September 1.

Tools

Topics & Collections

small text medium text large text

BSI Standards List

Standard
Year
Title
BS 1112
1962
Specification for sizes of photographic black-and-white papers for general use
BS 1113
1999
Specification for design and manufacture of water-tube steam generating plant (including superheaters, reheaters and steel tube economizers)
BS 1116
1956
Flexible trailing cables for quarries and metalliferous mines
BS 1117-1
1964
Specification for bare fine resistance wire for precision electrical equipment. Inch units
BS 1117:2
1964
Specification for bare fine resistance wire for precision electrical equipment. Metric units
BS 1118
1952
Determination of dimensional change on laundering of woven cotton and linen fabrics
BS 1120
1973
Specification for dimensions for diamond tipped boring tools
BS 1123:1
1987
Safety valves, gauges and fusible plugs for compressed air or inert gas installations. Code of practice for installation
BS 1125
1987
Specification for WC flushing cisterns (including dual flush cisterns and flush pipes)
BS 1126
1957
General recommendations for the gas welding of wrought aluminium and aluminium alloys
BS 1127:1
1990
Screwing dies and dienuts. Specification for hand- and machine-operated circular screwing dies and hand-operated die stocks
BS 1127:2
1990
Screwing dies and dienuts. Specification for hand- and machine-operated circular screwing dies for taper pipe threads; R Series
BS 1127:3
1990
Screwing dies and dienuts. Specification for hand- and machine-operated circular screwing dies for parallel pipe threads; G series
BS 1127:4
1990
Screwing dies and dienuts. Terminology for circular screwing dies
BS 1127:5
1990
Screwing dies and dienuts. Specification for dimensions of hexagon dienuts
BS 1129
1990
Specification for portable timber ladders, steps, trestles and lightweight stagings
BS 1132
1987
Specification for automatic pipettes
BS 1133:4
1991
Packaging code. Mechanical aids in package handling
BS 1133:5
1985
Packaging code. Protection against spoilage of packages and their contents by micro-organisms, insects, mites and rodents
BS 1133:6.1
1991
Packaging code. Protection of metal surfaces against corrosion during transport and storage. Cleaning and drying of metal surfaces
BS 1133:6.2
1991
Packaging code. Protection of metal surfaces against corrosion during transport and storage. Temporary protectives and their application
BS 1133:7.1
1986
Packaging code. Paper and board wrappers, bags and containers. Wrapping papers
BS 1133:7.2
1986
Packaging code. Paper and board wrappers, bags and containers. Bags and envelopes
BS 1133:7.3
1986
Packaging code. Paper and board wrappers, bags and containers. Cartons and boxes
BS 1133:7.4
1989
Packaging code. Paper and board wrappers, bags and containers. Fibreboard drums
BS 1133:7.5
1990
Packaging code. Paper and board wrappers, bags and containers. Fibreboard cases and fitments
BS 1133:7.6
1988
Packaging code. Paper and board wrappers, bags and containers. Moulded pulp packaging
BS 1133:7.7
1990
Packaging code. Paper and board wrappers, bags and containers. Composite containers
BS 1133:8
1991
Packaging code. Wooden boxes, cases and crates
BS 1133-9
1967
Packaging code. Textile bags, sacks and wrappings
BS 1133:10.1
1990
Packaging code. Metal containers. Tins and cans
BS 1133:10.2
1991
Packaging code. Metal containers. Metal drums
BS 1133:10.3
1990
Packaging code. Metal containers. Metal collapsible tubes
BS 1133-11
1968
Packaging code. Packaging felt
BS 1133:12
1986
Packaging code. Methods of protection against shock (excluding cushioning devices)
BS 1133-13
1954
Packaging code. Twines and cords for packaging
BS 1133:14
1985
Packaging code. Adhesive closing and sealing tapes
BS 1133:15
1991
Packaging code. Tensional strapping
BS 1133:16
1987
Packaging code. Adhesives for packaging
BS 1133-17
1964
Packaging code. Wicker and veneer baskets
BS 1133:18
1991
Packaging code. Packaging in glass
BS 1133:19
1986
Packaging code. Use of desiccants in packaging
BS 1133-20
1973
Packaging for air freight excluding livestock
BS 1133:21
1991
Packaging code. Regenerated cellulose film, films made of plastics, aluminium foil, flexible multilayer structures and metallized materials
BS 1133:22
1989
Packaging code. Packaging in plastics containers
BS 1134:1
1988
Assessment of surface texture. Methods and instrumentation
BS 1134:2
1990
Assessment of surface texture. Guidance and general information
BS 1136
1972
Specification for mild steel refuse storage containers
BS 1137
1966
Phenolic resin bonded paper sheets for electrical purposes at power frequencies
BS 1138
1943
Test pieces for production control of aluminium alloy spot welds
BS 1139:1.1
1990
Metal scaffolding. Tubes. Specification for steel tube
BS 1139:1.2
1990
Metal scaffolding. Tubes. Specification for aluminium tube
BS 1139:2.1
1991
Metal scaffolding. Couplers. Specification for steel couplers, loose spigots and base-plates for use in working scaffolds and falsework made of steel tubes
BS 1139:2.2
1991
Metal scaffolding. Couplers. Specification for steel and aluminium couplers, fittings and accessories for use in tubular scaffolding
BS 1139-3
1994
Metal scaffolding. Specification for prefabricated mobile access and working towers
BS 1139:4
1982
Metal scaffolding. Specification for prefabricated steel splitheads and trestles
BS 1139:5
1990
Metal scaffolding. Specification for materials, dimensions, design loads and safety requirements for service and working scaffolds made of prefabricated elements
BS 1140
1993
Specification for resistance spot welding of uncoated and coated low carbon steel
BS 1142
1989
Specification for fibre building boards
BS 1143
1974
Vitrified clay pipes and fittings with extra chemically resistant properties
BS 1144
1967
Cold worked steel bars for the reinforcement of concrete
BS 1148
1943
Diamond tipped turning tools
BS 1151
1971
Form of time and wages sheet and pay packet for the building and civil engineering contracting industries
BS 1153
1992
Recommendations for processing and storage of silver-gelatine-type microfilm
BS 1154
2003
Natural rubber compounds. Specification
BS 1155
2003
Natural rubber compounds for extrusion. Specification
BS 1157
1965
Recommendations for tapping drill sizes for use with fluted taps
BS 1161
1977
Specification for aluminium alloy sections for structural purposes
BS 1162 & 1418 & 1410
1973
Specification for mastic asphalt for building (natural rock asphalt aggregate)
BS 1164
1952
Dimensions of prefocus lamp-caps and lampholders (for voltages not exceeding 250 volts)
BS 1165
1966
Specification for clinker and furnace bottom ash aggregates for concrete
BS 1167
1960
Cotton fabrics for rubber footwear
BS 1169
1953
Rubber sealing rings for domestic preserving jars for fruit and vegetables
BS 1170
1983
Recommendations for treatment of water for marine boilers
BS 1179
1967
Glossary of terms used in the gas industry
BS 1179:6
1980
Glossary of terms used in the gas industry. Combustion and utilization including installation at consumers' premises
BS 1180
1972
Concrete bricks and fixing bricks
BS 1181
1999
Specification for clay flue terminals
BS 1182
1955
Cast brass thimbles (spigot and socket) and tailpieces (for drainage connections)
BS 1184
1976
Specification. Copper and copper alloy traps
BS 1185
1963
Guards for underground stopvalves
BS 1186-1
1971
Timber for and workmanship in joinery. Specification for timber
BS 1186:2
1988
Timber for and workmanship in joinery. Specification for workmanship
BS 1186:3
1990
Timber for and workmanship in joinery. Specification for wood trim and its fixing
BS 1187
1959
Specification for wood blocks for floors
BS 1188
1974
Specification for ceramic wash basins and pedestals
BS 1189
1986
Specification for baths made from porcelain enamelled cast iron
BS 1191-1
1967
Specification for gypsum building plasters. Excluding premixed lightweight plasters
BS 1191:2
1973
Specification for gypsum building plasters. Premixed lightweight plasters
BS 1192:2
1987
Construction drawing practice. Recommendations for architectural and engineering drawings
BS 1192:4
1984
Construction drawing practice. Recommendations for landscape drawings
BS 1192:5
1998
Construction drawing practice. Guide for structuring and exchange of CAD data
BS 1193
1961
Specification for sizes of sensitized materials for recording instruments
BS 1194
1969
Specification for concrete porous pipes for under-drainage
BS 1195
1948
Specification for kitchen fitments and equipment
BS 1196
1989
Specification for clayware field drain pipes and junctions
BS 1197:2
1973
Specification for concrete flooring tiles and fittings. Metric units
BS 1202:1
2002
Specification for nails. Steel nails
BS 1202:2
1974
Specification for nails. Copper nails
BS 1202:3
1974
Specification for nails. Aluminium nails
BS 1203
2001
Hot-setting phenolic and aminoplastic wood adhesives. Classification and test method
BS 1204
1993
Specification for type MR phenolic and aminoplastic synthetic resin adhesives for wood
BS 1206
1974
Specification for fireclay sinks: dimensions and workmanship
BS 1207
1961
Hollow glass blocks
BS 1208
1945
Semi-rotary pumps, hand operated, double acting for water
BS 1210
1963
Specification for wood screws
BS 1211
1958
Specification for centrifugally cast (spun) iron pressure pipes for water, gas and sewage
BS 1212:1
1990
Float operated valves. Specification for piston type float operated valves (copper alloy body) (excluding floats)
BS 1212:2
1990
Float operated valves. Specification for diaphragm type float operated valves (copper alloy body) (excluding floats)
BS 1212:3
1990
Float operated valves. Specification for diaphragm type float operated valves (plastics bodied) for cold water services only (excluding floats)
BS 1212:4
1991
Float operated valves. Specification for compact type float operated valves for WC flushing cisterns (including floats)
BS 1213
1945
Ceramic washdown W.C. pans
BS 1214
1977
Specification for hessian sandbags and rot-proofed hessian sandbags
BS 1215
1945
Oil stains
BS 1217
1997
Specification for cast stone
BS 1218
1946
Sluice valves for waterworks purposes
BS 1219
1958
Recommendations for preparation of mathematical copy and correction of mathematical proofs
BS 1219M
1961
Preparation of mathematical copy and correction of proofs (extracted from BS 1219:1958)
BS 1221
1964
Steel fabric for the reinforcement of concrete
BS 1222
1945
Battery-operated electric fences
BS 1224
1965
Specification for electroplated coatings of nickel and chromium
BS 1225
1945
Recommended methods for the spectrographic analysis of high purity zinc and zinc alloys for die casting
BS 1226
1945
Draining boards
BS 1228
1945
Iron, steel and non-ferrous door bolts
BS 1229
1945
Fireclay washtubs and sink sets (dimensions and workmanship)
BS 1230:1
1985
Gypsum plasterboard. Specification for plasterboard excluding materials submitted to secondary operations
BS 1231
1963
PVC insulated cables for power switchgear wiring
BS 1241
1959
Tarmacadam and tar carpets (gravel aggregate)
BS 1242
1960
Tarmacadam 'tarpaving' for footpaths, playgrounds and similar works
BS 1243
1978
Specification for metal ties for cavity wall construction
BS 1244
1956
Metal sinks for domestic purposes
BS 1245
1975
Specification for metal door frames (steel)
BS 1246
1959
Metal skirtings, picture rails and beads
BS 1247:1
1990
Manhole steps. Specification for galvanized ferrous or stainless steel manhole steps
BS 1247:2
1990
Manhole steps. Specification for plastics encapsulated manhole steps
BS 1247:3
1991
Manhole steps. Specification for aluminium manhole steps
BS 1248
1954
Wallcoverings in roll form
BS 1251
1987
Specification for open-fireplace components
BS 1252
1991
Specification for domestic solid mineral fuel-fired, free-standing cookers with or without boilers
BS 1254
1981
Specification for WC seats (plastics)
BS 1255
1953
Brackets and supports for lavatory basins and sinks (dimensions and workmanship)
BS 143 & 1256
2000
Threaded pipe fittings in malleable cast iron and cast copper alloy
BS 1258
1946
Textile-covered bunched enamelled-copper-wire conductors
BS 1259
1958
Intrinsically safe electrical apparatus and circuits for use in explosive atmospheres
BS 1262
2002
Metal packaging. Round lever-lid metal containers for surface coatings. Specification
BS 1265 to 1268
1958
Drawing boards and tee squares
BS 1270
1960
Schedule for electric discharge lamps for general purposes
BS 1281
1974
Specification for glazed ceramic tiles and tile fittings for internal walls
BS 1282
1999
Wood preservatives. Guidance on choice, use and application
BS 1283
1945
Jewellers' ring sticks and ring gauges
BS 1285
1980
Specification for wood surrounds for steel windows and doors
BS 1286
1974
Specification for clay tiles for flooring
BS 1287
1946
High carbon steel gas cylinders for carbon dioxide, nitrous oxide and ethylene
BS 1288
1946
Manganese steel gas cylinders for carbon dioxide, nitrous oxide and ethylene
BS 1289:1
1986
Flue blocks and masonry terminals for gas appliances. Specification for precast concrete flue blocks and terminals
BS 1290
1983
Specification for wire rope slings and sling legs for general lifting purposes
BS 1291
1946
Ferrous traps for baths
BS 1292
1945
Storage fitments for living rooms and bedrooms
BS 1293 & 2074
1965
Methods for the size analysis of coal and coke
BS 1294
1946
Soot doors for domestic buildings
BS 1295
1987
Code of practice for training in arc welding skills
BS 1296:1
1970
Specification for single point cutting tools. Shank sections
BS 1296:2
1972
Specification for single point cutting tools. Nomenclature
BS 1296:3
1978
Specification for single point cutting tools. Butt-welded cutting tools and blanks
BS 1296:4
1978
Specification for single point cutting tools. Ground high speed steel tool bits
BS 1297
1987
Specification for tongued and grooved softwood flooring
BS 1298
1967
Lamp caps and holders for festoon lamps (for voltages not exceeding 50 V)
BS 1300
1960
Beehives, frames and wax foundation
BS 1302
1946
Photographic masks for contact printing
BS 1304
1956
'Ready-to-fit' thermal insulating materials
BS 1305
1974
Specification for batch type concrete mixers
BS 1308
1970
Specification for concrete street lighting columns
BS 1309
1974
Methods of sampling and chemical testing of leather
BS 1310
1984
Specification for coal tar pitches for building purposes
BS 1311
1955
Sizes of manufacturers' trade and technical literature (including recommendations for contents of catalogues)
BS 1313
1947
Fraction-detective charts for quality control
BS 1314
1966
Phenolic resin bonded paper round tubes for electrical purposes at power frequencies
BS 1317
1946
Wood laths for plastering
BS 1318
1955
Wood battens and counter-battens for slating and tiling
BS 1319
1955
Specification for medical gas cylinders, valves and yoke connections
BS 1320
1946
High-voltage overhead lines on wood poles for line voltages up to and including 11 kV, with conductors not exceeding 0.05 sq in
BS 1322
1992
Specification for aminoplastic moulding materials
BS 1324
1962
Asphalt tiles for paving and flooring (natural rock asphalt)
BS 1328
1969
Methods of sampling water used in industry
BS 1329
1974
Specification for metal hand rinse basins
BS 1331
1954
Builder's hardware for housing
BS 1332
1960
Guide to civil land aerodrome lighting
BS 1333
1958
Acid resisting silicon iron pipes and pipe fittings
BS 1334
1969
The use of thermal insulating materials for central heating and hot and cold water supply installations
BS 1335
1968
Specification for air depolarized primary cells
BS 1336
1971
Specification for knotting
BS 1338
1952
Lingerie
BS 1339:1
2002
Humidity. Terms, definitions and formulae
BS 1340
1960
Prepared and natural tracing paper
BS 1342
1962
Detail drawing paper
BS 1343
1962
Cartridge drawing paper
BS 1344:1
1994
Methods of testing vitreous enamel finishes. Determination of resistance to thermal shock of coatings on articles other than cooking utensils and fabricated sheet steel components
BS 1344:2
1975
Methods of testing vitreous enamel finishes. Resistance to citric acid at room temperature
BS 1344-3
1967
Methods of testing vitreous enamel finishes. Determination of resistance to sulphuric acid at room temperature
BS 1344:4
1968
Methods of testing vitreous enamel finishes. Resistance to abrasion
BS 1344:5
1984
Methods of testing vitreous enamel finishes. Determination of resistance to hot detergent solutions used for washing textiles
BS 1344:6
1971
Methods of testing vitreous enamel finishes. Resistance to alkali
BS 1344:7
1984
Methods of testing vitreous enamel finishes. Determination of resistance to heat
BS 1344:8
1984
Methods of testing vitreous enamel finishes. Determination of resistance to boiling citric acid
BS 1344:9
1998
Methods of testing vitreous enamel finishes. Determination of resistance to boiling water and water vapour
BS 1344:10
1987
Methods of testing vitreous enamel finishes. Determination of resistance to condensing hydrochloric acid vapour
BS 1344:11
1998
Methods of testing vitreous enamel finishes. High voltage test for enamelled articles for service under highly corrosive conditions
BS 1344:12
1996
Methods of testing vitreous enamel finishes. Production of specimens for testing coatings on sheet steel
BS 1344:13
1975
Methods of testing vitreous enamel finishes. Production of specimens for testing coatings on cast iron
BS 1344:14
1984
Methods of testing vitreous enamel finishes. Apparatus for testing with acid and neutral liquids and their vapours
BS 1344:15
1997
Methods of testing vitreous enamel finishes. Apparatus for testing with alkaline liquids
BS 1344:16
1998
Methods of testing vitreous enamel finishes. Resistance to thermal shock of coatings on cooking utensils
BS 1344:17
1998
Methods of testing vitreous enamel finishes. Resistance to hot sodium hydroxide solution
BS 1344:18
1981
Methods of testing vitreous enamel finishes. Determination of fluidity behaviour: fusion flow test
BS 1344:21
1993
Methods of testing vitreous enamel finishes. Determination of the resistance of vitreous enamelled articles to impact: pistol test
BS 1345
1947
Women's blouses
BS 1347
1986
Specification for architects', engineers' and surveyors' metric scale rules
BS 1348
1970
Specification for kitchen measuring spoons, measures and jugs
BS 1349
1947
Impact test for grey cast irons
BS 1358
1969
Colours for enamels on metal and ceramic bases
BS 1359
1947
Photographic conversion tables
BS 1360
1973
Specification personal stationery (terms and sizes)
BS 1361
1971
Specification for cartridge fuses for a.c. circuits in domestic and similar premises
BS 1362
1953
Specification for general purpose fuse links for domestic and similar purposes (primarily for use in plugs)
BS 1363:1
1995
13 A plugs, socket-outlets and adaptors. Specification for rewirable and non-rewirable 13 A fused plugs
BS 1363:2
1995
13 A plugs, socket-outlets and adaptors. Specification for 13 A switched and unswitched socket-outlets
BS 1363:3
1995
13 A plugs, socket-outlets and adaptors. Specification for adaptors
BS 1363:4
1995
13 A plugs, socket-outlets and adaptors. Specification for 13A fused connection units switched and unswitched
BS 1364
1947
Precast concrete blocks
BS 1365
1990
Specification for short-range short-stem thermometers
BS 1366
1953
Domestic steel combination mattresses (diamond-mesh, square-mesh and spiral-spring types)
BS 1367
1947
Code of procedure in inspection of copper-base alloy sand castings
BS 1368
1947
Dimensions of ignition and lighting units for motor cycles
BS 1369:1
1987
Steel lathing for internal plastering and external rendering. Specification for expanded metal and ribbed lathing
BS 1370
1979
Specification for low heat Portland cement
BS 1371
1956
Specification for 35 mm and 16 mm microfilms, spools and reels
BS 1372
1947
Specification for bees (colonies and nuclei)
BS 1373
1967
Clothes-line posts
BS 1374
1972
Recommendations on the use of British Standard log sheets for steam and hot water boiler plants
BS 1376
1974
Specification for colours of light signals
BS 1377:1
1990
Methods of test for soils for civil engineering purposes. General requirements and sample preparation
BS 1377:2
1990
Methods of test for soils for civil engineering purposes. Classification tests
BS 1377:3
1990
Methods of test for soils for civil engineering purposes. Chemical and electro-chemical tests
BS 1377:4
1990
Methods of test for soils for civil engineering purposes. Compaction-related tests
BS 1377:5
1990
Methods of test for soils for civil engineering purposes. Compressibility, permeability and durability tests
BS 1377:6
1990
Methods of test for soils for civil engineering purposes. Consolidation and permeability tests in hydraulic cells and with pore pressure measurement
BS 1377:7
1990
Methods of test for soils for civil engineering purposes. Shear strength tests (total stress)
BS 1377:8
1990
Methods of test for soils for civil engineering purposes. Shear strength tests (effective stress)
BS 1377:9
1990
Methods of test for soils for civil engineering purposes. In-situ tests
BS 1379
1947
Bite of film clips
BS 1381
1947
Gas lighting units and fittings for single-family dwellings
BS 1382
1948
Portable fire extinguishers of the water type (gas pressure)
BS 1383
1966
Photoelectric exposure meters
BS 1384:1
1985
Photographic density measurements. Guide for terms, symbols and notations
BS 1384:2
2001
Photographic density measurements. Geometric conditions for transmission density
BS 1386
1957
Copper tubes to be buried underground
BS 1387
1985
Specification for screwed and socketed steel tubes and tubulars and for plain end steel tubes suitable for welding or for screwing to BS 21 pipe threads
BS 1388
1947
Test code for ovens and kilns firing pottery
BS 1389
1986
Specification for hose connections and hose assemblies for equipment for gas welding, cutting and related processes
BS 1390
1990
Specification for baths made from vitreous enamelled sheet steel
BS 1391
1952
Specification for performance tests for protective schemes used in the protection of light-gauge steel and wrought iron against corrosion
BS 1394
1947
Stationary circulation pumps for heating and hot water service systems
BS 1395
1948
30-ampere flameproof plugs-and-sockets and cable-couplers
BS 1396
1947
Gas meter cupboards
BS 1397
1979
Specification for industrial safety belts, harnesses and safety lanyards
BS 1399
1947
Specification for rotary shaft lip seals
BS 1400
1973
Specification for copper alloy ingots and copper alloy and high conductivity copper castings
BS 1406
1960
Sizes of sensitized photographic plates
BS 1407
1970
Specification for high carbon bright steel (silver steel)
BS 1408
1964
Patented cold drawn steel spring wire
BS 1409
1950
Letter symbols for electronic valves
BS 1411
1972
Specification for printers' cards and blanks (terms and sizes)
BS 1413
1989
Specification for page size for books
BS 1414
1975
Specification for steel wedge gate valves (flanged and butt-welding ends) for the petroleum, petrochemical and allied industries
BS 1415
1955
Mixing valves
BS 1416
1962
Methods for the sampling and analysis of rennet casein
BS 1416c
1962
Colour standards for rennet casein
BS 1417
1963
Methods for the sampling and analysis of acid casein
BS 1419
1953
Domestic steel lay-on mattresses (spiral spring type)
BS 1420
1965
Glossary of terms applicable to wrought products in copper, zinc and their alloys
BS 1421
1995
Specification for picks, beater picks and mattocks
BS 1422
1956
Steel subframes, sills and window boards for metal windows
BS 1423
1948
High carbon oil-hardening steel (precision finish)
BS 1424
1948
Clay single-lap roofing tiles and fittings (dimensions and workmanship only)
BS 1425:supp 1
1966
Appendices
BS 1425:1
1991
Cleanliness of fillings and stuffings for bedding, upholstery and other domestic articles. Specification for fillings and stuffings other than feather and/or down
BS 1425:2
1991
Cleanliness of fillings and stuffings for bedding, upholstery and other domestic articles. Specification for feather and/or down fillings and stuffings
BS 1427
1993
Guide to field and on-site test methods for the analysis of waters
BS 1428-B1
1964
Microchemical analysis. Apparatus for the determination of elements by other than combustion methods. Specification for nitrogen determination apparatus (micro-Kjeldahl)
BS 1428:B2
1960
Microchemical analysis. Apparatus for the determination of elements by other than combustion methods. Specification for ammonia distillation apparatus (Markham)
BS 1428-B3
1964
Microchemical apparatus. Apparatus for the determination of elements by other than combustion methods. Specification for nitrogen determination apparatus (non-transference micro-Kjeldahl)
BS 1428:D1
1965
Microchemical apparatus. Volumetric analysis. Specification for burettes with pressure-filling device and automatic zero
BS 1428-D2
1963
Washout pipettes
BS 1428-D3
1960
Microchemical apparatus. Volumetric analysis. Specification for micro-nitrometer (Pregl type)
BS 1428:D4
1963
Microchemical apparatus. Volumetric analysis. Specification for capillary pipettes
BS 1428:D5
1955
Microchemical apparatus. Volumetric analysis. Specification for syringe pattern micro-pipette
BS 1428-D6
1955
Micrometer-operated burette
BS 1429
1980
Specification for annealed round steel wire for general engineering springs
BS 1431
1960
Specification for wrought copper and wrought zinc rainwater goods
BS 1432
1987
Specification for copper for electrical purposes: high conductivity copper rectangular conductors with drawn or rolled edges
BS 1433
1970
Specification for copper for electrical purposes. Rod and bar
BS 1434
1985
Specification for copper for electrical purposes: copper sections in bars, blanks and segments for commutators
BS 1435-2
2005
Rubber hose assemblies for oil suction and discharge services. Recommendations for storage, testing and use
BS 1437
1948
Methods of determining filter factors of photographic negative materials
BS 1438
2004
Aggregates. Single-sized aggregates for use as a medium in biological percolating filters
BS 1439
1992
Specification for single-ply wet-creped paper towelling
BS 1440
1971
Endless V-belt drives sections 'Y', 'Z', 'A', 'B', 'C' and 'D'
BS 1442
1969
Specification for galvanized mild steel wire for armouring cables
BS 1443
1952
Sizes of X-ray intensifying screens for medical and industrial use
BS 1444
1970
Cold-setting casein adhesive powders for wood
BS 1445
1951
Infants' and girls' underwear and nightwear
BS 1446
1973
Specification for mastic asphalt (natural rock asphalt fine aggregate) for roads and footways
BS 1447
1988
Specification for mastic asphalt (limestone fine aggregate) for roads, footways and pavings in building
BS 1447
1973
Specification for mastic asphalt (limestone fine aggregate) for roads, footways and pavings in building
BS 1448
1948
Nomenclature of decorative metallic finishes
BS 1449:1.7
1991
Universal Decimal Classification. English full edition. Colour industries (dyes, inks, paints etc.)
BS 1449:1.1
1991
Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip. General specification
BS 1449-1.6
1991
Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip. Specification for tolerances on dimensions and shape for hot rolled wide material
BS 1449:1.8
1991
Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip. Specification for hot rolled narStandard strip based on formability
BS 1450
1963
Black pitch mastic flooring
BS 1452
1961
Specification for flake graphite cast iron
BS 1453
1972
Specification for filler materials for gas welding
BS 1454
1969
Consumers' electricity control units. Fuse and miniature circuit breaker types principally for use in domestic premises
BS 1455
1972
Specification for plywood manufactured from tropical hardwoods
BS 1460
1967
Method for determination of apparent density after compaction of precipitated calcium carbonate
BS 1464
1957
Solid drawn copper alloy tubes for heat exchange equipment in the petroleum industry
BS 1466
1967
Tie-on tag labels
BS 1467
1972
Specification for folders and files
BS 1468
1967
Specification for tin anodes and tin salts for electroplating
BS 1469
1962
Specification for coal tar fuels
BS 1470
1987
Specification for wrought aluminium and aluminium alloys for general engineering purposes: plate, sheet and strip
BS 1471
1972
Specification for wrought aluminium and aluminium alloys for general engineering purposes - drawn tube
BS 1472
1972
Specification for wrought aluminium and aluminium alloys for general engineering purposes - forging stock and forgings
BS 1473
1972
Specification for wrought aluminium and aluminium alloys for general engineering purposes - rivet, bolt and screw stock
BS 1474
1987
Specification for wrought aluminium and aluminium alloys for general engineering purposes: bars, extruded round tubes and sections
BS 1475
1972
Specification for wrought aluminium and aluminium alloys for general engineering purposes - wire
BS 1476
1963
Wrought aluminium and aluminium alloys for general engineering purposes. Bars and sections
BS 1477
1963
Wrought aluminium and aluminium alloys for general engineering purposes. Plate
BS 1478
1967
Bending dimensions and scheduling of bars for the reinforcement of concrete
BS 1484
1948
10-gallon tinned steel milk can and lid
BS 1485
1983
Specification for zinc coated hexagonal steel wire netting
BS 1486:1
1959
Lubricating nipples. Lubricating nipples and adaptors for use on machinery and vehicles
BS 1486:2
1961
Lubricating nipples. Heavy duty lubricating nipples
BS 1486:4
1981
Lubricating nipples. Specification for hydraulic grease nipples
BS 1489
1972
Specification for the packaging of covered winding wires for electrical purposes
BS 1490
1988
Specification for aluminium and aluminium alloy ingots and castings for general engineering purposes
BS 1491
1970
Specification for dimensions of 127, 120 and 620 photographic roll film, backing paper and film spools
BS 1492
1970
Leaders and run-out trailers for 35 mm and 16 mm motion picture release prints
BS 1493
1967
Method of specifying general purpose polystyrene (PS) moulding and extrusion materials
BS 1494:1
1964
Specification for fixing accessories for building purposes. Fixings for sheet, roof and wall coverings
BS 1494-2
1967
Specification for fixing accessories for building purposes. Sundry fixings
BS 1496
1948
Photographic safelight screens and housings
BS 1498
1954
Specification for gear hobbing machines for turbines and similar drives
BS 1499
1949
Sampling non-ferrous metals
BS 1500
1958
Specification for fusion welded pressure vessels for general purposes
BS 1501
1965
Steels for pressure purposes
BS 1502
1968
Specification for steels for fired and unfired pressure vessels: sections and bars
BS 1503
1989
Specification for steel forgings for pressure purposes
BS 1510
1958
Steels for use in the chemical, petroleum and allied industries (low temperature supplementary requirements to BS 1501-1506)
BS 1521
1972
Specification for waterproof building papers
BS 1523:1
1967
Glossary of terms used in automatic controlling and regulating systems. Process and kinetic control
BS 1524
1993
Specification for cellulose acetate moulding materials
BS 1538
1956
Specification. Intrinsically-safe transformers primarily for bell-signalling circuits
BS 1539
1949
Specification. Moulded electrical insulating materials for use at high temperatures
BS 1540
1949
Specification. Moulded electrical insulating materials for use at radio frequencies
BS 1541
1963
Rolled copper and copper alloy plate for heat exchanger and condenser tube plates
BS 1542
1982
Specification for equipment for eye, face and neck protection against non-ionizing radiation arising during welding and similar operations
BS 1544
1973
Bound account analysis and manuscript books
BS 1545
1990
Specification for liquid toilet soap
BS 1546
1963
Specification for electric lamps for lighthouses
BS 1548
1953
Certified samples for metallurgical analysis
BS 1550
1952
Workroom stands for women's and children's light clothing
BS 1552
1995
Specification for open bottomed taper plug valves for 1st, 2nd and 3rd family gases up to 200 mbar
BS 1553:1
1977
Specification for graphical symbols for general engineering. Piping systems and plant
BS 1553:2
1950
Specification for graphical symbols for general engineering. Graphical symbols for power generating plant
BS 1553:3
1950
Graphical symbols for general engineering. Graphical symbols for compressing plant
BS 1554
1990
Specification for stainless and heat-resisting steel round wire
BS 1555
1949
Thermostats for electrically-heated domestic hot water supply (a.c. only)
BS 1559
1949
Reels and wooden drums for bare wire, stranded conductors and trolley wire, for use in the United Kingdom
BS 1560:3.1
1989
Circular flanges for pipes, valves and fittings (Class designated). Steel, cast iron and copper alloy flanges. Specification for steel flanges
BS 1560:3.2
1989
Circular flanges for pipes, valves and fittings (Class designated). Steel, cast iron and copper alloy flanges. Specification for cast iron flanges
BS 1560:3.3
1989
Circular flanges for pipes, valves and fittings (Class designated). Steel, cast iron and copper alloy flanges. Specification for copper alloy and composite flanges
BS 1561
1966
Specification for silver anodes and silver salts for electroplating
BS 1562:2
1973
Specification for agricultural mower and combine-harvester parts. Metric units
BS 1563
1949
Specification. Cast iron sectional tanks (rectangular)
BS 1564
1949
Specification for pressed steel sectional rectangular tanks
BS 1565
1949
Specification for galvanized mild steel indirect cylinders, annular or saddle-back type
BS 1566:1
2002
Copper indirect cylinders for domestic purposes. Open vented copper cylinders. Requirements and test methods
BS 1566:2
1984
Copper indirect cylinders for domestic purposes. Specification for single feed indirect cylinders
BS 1567
1953
Specification for wood door frames and linings
BS 1568
1960
Specification for magnetic tape recording equipment
BS 1569
1965
Copper sheet and strip for roofing and other building purposes
BS 1570
1960
Flanged and butt-welding end steel plug valves for the petroleum industry (excluding well-head and flow-line valves)
BS 1571-1
1975
Specification for testing of positive displacement compressors and exhausters. Methods for acceptance testing
BS 1571:2
1975
Specification for testing of positive displacement compressors and exhausters. Methods for simplified acceptance testing for air compressors and exhausters
BS 1573
1949
Road studs and plates (stainless steel)
BS 1574
1994
Specification for split pins (inch series)
BS 1574
1958
Specification for split pins (inch series)
BS 1577
1949
Mild steel refuse or food waste containers
BS 1578
1965
Rubbers for the dairy industry
BS 1581
1949
Vitamin D in oil for poultry feeding purposes (types 200 and 400)
BS 1582
1967
Technical compound cod oil
BS 1583
1986
Specification for one-mark pipettes
BS 1584
1949
Glossary of terms used in refrigeration
BS 1585
1949
16 mm cinematograph sound-on-film release prints
BS 1586
1982
Methods for performance testing and presentation of performance data for refrigerant condensing units
BS 1588
1969
The use of thermal insulating materials in the temperature range 95°C to 230°C
BS 1589
1950
Thermal insulating materials (plastic composition, flexible and loose-fill)
BS 1590
1949
Lenses for 35 mm cinematograph projectors
BS 1591
1975
Specification for corrosion resisting high silicon iron castings
BS 1592
1958
Camera shutters
BS 1593
1963
Specification for perchloroethylene (tetrachloroethylene)
BS 1594
1950
Specification for diacetin (glyceryl diacetate)
BS 1595:1
1986
Propan-2-ol (isopropyl alcohol) for industrial use. Specification for propan-2-ol (isopropyl alcohol)
BS 1595:2
1984
Propan-2-ol (isopropyl alcohol) for industrial use. Methods of test
BS 1596
1992
Specification for fibreboard drums
BS 1597
1985
Specification for limits and methods of measurement of electromagnetic interference generated by marine equipment and installations
BS 1598
1964
Specification for ceramic insulating materials for general electrical purposes
BS 1599
1949
Identification numbers for cylinders of internal combustion engines (other than aircraft engines)
BS 1600
1991
Specification for dimensions of steel pipe for the petroleum industry
BS 1608
1990
Specification for electrically driven refrigerant condensing units
BS 1609
1949
Press tool sets
BS 1610
1964
Materials testing machines and force verification equipment
BS 1611
1953
Glossary of colour terms used in science and industry
BS 1612
1961
Timber Dutch lights
BS 1612
1950
Timber Dutch lights
BS 1614
1949
Brickwork settings for cylindrical boilers
BS 1615
1987
Method for specifying anodic oxidation coatings on aluminium and its alloys
BS 1616
1950
Aluminium electrodes for metal-arc welding
BS 1617
1950
Carbon steel castings with high magnetic permeability
BS 1618
1961
Dimensions of lenses and lens attachments for still cameras
BS 1618
1961
Dimensions of lenses and lens attachments for still cameras
BS 1619:2
1988
Re-usable hypodermic syringes for insulin injection. Specification for syringes for use with insulin of strength 100 units per millilitre
BS 1620
1950
Dimensions of screened magnetos (G, K and M types)
BS 1621
1961
Bitumen macadam with crushed rock or slag aggregate
BS 1622
1989
Specification for spreaders for winter maintenance
BS 1627
1950
Cold-drawn low carbon steel tubes for heat exchangers and condensers for the petroleum industry
BS 1628
1950
Cold-drawn alloy steel tubes for heat exchangers and condensers for the petroleum industry
BS 1629
1976
Recommendation for references to published materials
BS 1629
1989
Recommendation for references to published materials
BS 1633
1958
Steel for land boilers, receivers and other pressure vessels
BS 1634
1973
Specification for dimensions of stoneware pipes and pipe fittings for chemical purposes
BS 1635
1990
Recommendations for graphic symbols and abbreviations for fire protection drawings
BS 1637
1950
Memorandum on the M.K.S. system of electrical and magnetic units
BS 1638
1950
Report on the selection of ranges of types and sizes (preferred numbers)
BS 1640:1
1962
Specification for steel butt-welding pipe fittings for the petroleum industry. Wrought carbon and ferritic alloy steel fittings
BS 1640:2
1962
Specification for steel butt-welding pipe fittings for the petroleum industry. Wrought and cast austenitic chromium-nickel steel fittings
BS 1640:3
1968
Specification for steel butt-welding pipe fittings for the petroleum industry. Wrought carbon and ferritic alloy steel fittings. Metric units
BS 1640:4
1968
Specification for steel butt-welding pipe fittings for the petroleum industry. Wrought and cast austenitic chromium-nickel steel fittings. Metric units
BS 1641
1950
Cast iron pipe fittings for sprinklers and other fire protection installations
BS 1642
1969
Metric and inch dimensions of plummer blocks for radial ball and roller bearings
BS 1643
1983
Specification for precision vernier height gauges
BS 1644
1950
Dimensions of unscreened camshaft speed magnetos
BS 1645
1957
Domestic electric vacuum cleaners
BS 1646:1
1979
Symbolic representation for process measurement control functions and instrumentation. Basic requirements
BS 1646:2
1983
Symbolic representation for process measurement control functions and instrumentation. Specification for additional basic requirements
BS 1646:3
1984
Symbolic representation for process measurement control functions and instrumentation. Specification for detailed symbols for instrument interconnection diagrams
BS 1646:4
1984
Symbolic representation for process measurement control functions and instrumentation. Specification for basic symbols for process computer, interface and shared display/control functions
BS 1647:1
1984
pH measurement. Specification for pH scale
BS 1647:1
1984
pH measurement. Specification for pH scale
BS 1648
1950
Alloy steel castings for use at high temperatures
BS 1651
1986
Specification for industrial gloves
BS 1652
1950
Seamless half-per-cent molybdenum steel boiler and superheater tubes
BS 1653
1650
Seamless chromium-molybdenum steel boiler and superheater tubes
BS 1654
1950
Electrically welded mild steel boiler and superheater tubes
BS 1655
1950
Specification for flanged automatic control valves for the process control industry (face-to-face dimensions)
BS 1656
1950
Specification for honey grading glasses
BS 1657
1950
Specification for buttress threads
BS 1658
1970
Specification for housings for hydraulic seals for reciprocating applications
BS 1659
1950
Specification for tractive armature direct current neutral track and line relays for railway signalling
BS 1660:1
1992
Machine tapers. Specification for shanks and sockets with self-holding tapers (Morse and metric 5%)
BS 1660:2
1988
Machine tapers. Specification for reduction sleeves and extension sockets for tools with Morse taper shanks
BS 1660:3
1988
Machine tapers. Specification for turret sockets and reduction sleeves with tapped ends for tools with Morse taper shanks
BS 1660:4
1989
Machine tapers. Specification for spindle noses and tool shanks with self-release 7/24 tapers
BS 1660:5
1996
Machine tapers. Specification for reduction sleeves with external and internal 7/24 tapers
BS 1660:6
1988
Machine tapers. Specification for adaptors with external 7/24 tapers for tools with Morse taper shanks
BS 1660:7
1988
Machine tapers. Specification for extension adaptors with external 7/24 tapers for tools with Morse taper shanks
BS 1660:9
1988
Machine tapers. Specification for cotter slots
BS 1660:10
1988
Machine tapers. Specification for drill chuck tapers (Jacob and short Morse)
BS 1660:11
1991
Machine tapers. Specification for gauges
BS 1660:12
1996
Machine tapers. Specification for positive drive of Morse tapers
BS 1661
1951
Women's domestic overalls
BS 1662
1952
Light outerwear for infants and girls
BS 1663
1950
Specification for higher tensile steel chain Grade 40 (short link and pitched or calibrated) for lifting purposes
BS 1669
1972
Specification for industrial perforated plates
BS 1670
1956
Safety requirements for electric fires
BS 1671
1951
Domestic electric kettles
BS 1672
1972
Methods of testing natural rubber latices
BS 1674
1968
Specification for equipment and general procedure for mixing and vulcanizing rubber test mixes
BS 1675
1957
Weft pirns (taper fit) for direct spinning of cotton and spun rayon yarns
BS 1676
1970
Specification for heaters for tar and bitumen (mobile and transportable)
BS 1677
1959
Draughtsmen's drawing pins
BS 1678
1950
Cold drawn electrically welded mild steel boiler and superheater tubes
BS 1679:1
1976
Specification for containers for pharmaceutical dispensing. Paperboard containers for strip and blister packs
BS 1679-4
1969
Specification for containers for pharmaceutical dispensing. Plastics containers for tablets and ointments
BS 1679:5
1973
Containers for pharmaceutical dispensing. Eye dropper bottles
BS 1679:6
1994
Containers for pharmaceutical dispensing. Specification for glass medicine bottles
BS 1679:7
1968
Specification for containers for pharmaceutical dispensing. Ribbed oval glass bottles
BS 1679:8
1992
Containers for pharmaceutical dispensing. Specification for glass and plastics containers for solid dosage forms, semi-solids and powders
BS 1680
1950
Paste polish tins
BS 1681
1966
Wool and wool/rayon blankets for use by hospitals and local authorities
BS 1682
1950
Hospital bedsteads for general purposes
BS 1683
1987
Specification for coated aluminium foil for wrapping processed cheese
BS 1685
1950
Specification for bevel protractors (mechanical and optical)
BS 1685
1951
Specification for bevel protractors (mechanical and optical)
BS 1686
1950
Long-period, high-sensitivity, tensile creep testing
BS 1687
1950
Medium-sensitivity tensile creep testing
BS 1688
1950
Determination of time to rupture under stress
BS 1689
1957
Galvanized mild steel fire buckets
BS 1690
1962
Cold asphalt
BS 922 & 1691
1959
Specification for electrical refrigerators and food freezers for household use
BS 1692
1998
Specification for gin blocks
BS 1694
1990
Specification for hospital ward cots for children
BS 1695
1950
Urological catheters
BS 1696
1951
Short link wrought iron chain of special quality (excluding pitched or calibrated chain)
BS 1697
1950
Cleanliness of used hessian
BS 1698
1950
Mercury-arc rectifier equipments
BS 1700
1963
Memorandum on ships' derrick rigs
BS 1701
1970
Specification for air filters for air supply to internal combustion engines and compressors other than for aircraft
BS 1702
1950
Specification for mild steel drums (heavy duty - fixed ends)
BS 1703
2005
Specification for refuse chutes and hoppers
BS 1704
1951
Specification for solid-stem general purpose thermometers
BS 1705
1972
Specification for dimensions of metal sheets for letterpress photo-engravings
BS 1707
1989
Specification for hot binder distributors for road surface dressing
BS 1708
1951
Modular co-ordination
BS 1709
1970
Drawing instruments for drawing office use
BS 1710
1984
Specification for identification of pipelines and services
BS 1711
1975
Specification for solid rubber flooring
BS 1712
1951
Cast iron economizers with extended surface horizontal tubes
BS 1713
1951
Cast iron smooth tube economizers with pressed socket joints
BS 1715:1
1991
Analysis of soaps. General introduction, sampling, and test for presence of synthetic anionic-active surface active agents
BS 1715:2.1
1989
Analysis of soaps. Quantitative test methods. Method for determination of total alkali content and total fatty matter content
BS 1715:2.2
1989
Analysis of soaps. Quantitative test methods. Method for determination of total free alkali content
BS 1715:2.3
1989
Analysis of soaps. Quantitative test methods. Method for determination of free caustic alkali content
BS 1715:2.4
1989
Analysis of soaps. Quantitative test methods. Method for determination of free fatty acids content
BS 1715:2.5
1989
Analysis of soaps. Quantitative test methods. Method for determination of unsaponifiable, unsaponified, and unsaponified saponifiable matter contents
BS 1715:2.6
1989
Analysis of soaps. Quantitative test methods. Method for determination of moisture and volatile matter content
BS 1715:2.7
1989
Analysis of soaps. Quantitative test methods. Method for determination of chloride content
BS 1715:2.8
1989
Analysis of soaps. Quantitative test methods. Method for determination of glycerol content
BS 1715-2.11
1990
Analysis of soaps. Quantitative test methods. Method for determination of ethanol-insoluble matter content
BS 1716
1963
Cycle stands
BS 1717
1983
Specification for steel tubes for cycle and motor cycle purposes
BS 1718
1951
Tolerances for steel drop forgings and upset forgings
BS 1719
1951
Classification, coding and marking of covered electrodes for metal-arc welding
BS 1720
1951
Specification for woven asbestos binding tape for electrical purposes
BS 1721
1968
Portable fire extinguishers of the halogenated hydrocarbon type
BS 1722:1
1999
Fences. Specification for chain link fences
BS 1722:2
2000
Fences. Specification for strained wire and wire mesh netting fences
BS 1722-3
1973
Fences. Specification for strained wire fences
BS 1722:4
1986
Fences. Specification for cleft chestnut pale fences
BS 1722:5
1999
Fences. Specification for close-boarded and wooden palisade fences
BS 1722-6
1972
Fences. Specification for wooden palisade fences
BS 1722:7
1999
Fences. Specification for wooden post and rail fences
BS 1722:8
1997
Fences. Specification for mild steel (low carbon steel) continuous bar fences and hurdles
BS 1722:9
2000
Fences. Specification for mild steel (low carbon steel) fences with round or square verticals and flat horizontals
BS 1722:10
1999
Fences. Specification for anti-intruder fences in chain link and welded mesh
BS 1722:11
2000
Fences. Specification for prefabricated wood panel fences
BS 1722:12
1999
Fences. Specification for steel palisade fences
BS 1722:13
1978
Fences. Chain link fences for tennis court surrounds
BS 1722:14
2001
Fences. Specification for open mesh steel panel fences
BS 1722:16
1992
Fences. Specification for organic powder coatings to be used as a plastics finish to components and mesh
BS 1723:1
1986
Brazing. Specification for brazing
BS 1723:2
1986
Brazing. Guide to brazing
BS 1723:3
1988
Brazing. Methods for non-destructive and destructive testing
BS 1723:4
1988
Brazing. Methods for specifying brazing procedure and operator approval testing
BS 1724
1990
Specification for bronze welding by gas
BS 1725
1951
Thermodynamic properties of refrigerants
BS 1726:1
2002
Cylindrical helical springs made from round wire and bar. Guide to methods of specifying, tolerances and testing. Compression springs
BS 1726:2
2002
Cylindrical helical springs made from round wire and bar. Guide to methods of specifying, tolerances and testing. Extension springs
BS 1726:3
2002
Cylindrical helical springs made from round wire and bar. Guide to methods of specifying, tolerances and testing. Torsion springs
BS 1727
1987
Specification for motors for battery operated vehicles
BS 1728:1
1951
Methods for the analysis of aluminium and aluminium alloys. Determination of copper
BS 1728-2
1952
Methods for the analysis of aluminium and aluminium alloys. Determination of magnesium
BS 1728:5
1953
Methods for the analysis of aluminium and aluminium alloys. Determination of copper (absorptiometric method)
BS 1728:6
1955
Methods for the analysis of aluminium and aluminium alloys. Determination of iron (volumetric: titanous chloride method)
BS 1728:8
1957
Methods for the analysis of aluminium and aluminium alloys. Determination of iron (absorptiometric 1:10-phenanthroline method)
BS 1728:9
1957
Methods for the analysis of aluminium and aluminium alloys. Determination of manganese (volumetric: arsenite/nitrite method)
BS 1728:10
1957
Methods for the analysis of aluminium and aluminium alloys. Determination of manganese (absorptiometric method)
BS 1728:11
1960
Methods for the analysis of aluminium and aluminium alloys. Determination of silicon (perchloric acid method)
BS 1728:12
1961
Methods for the analysis of aluminium and aluminium alloys. Determination of silicon (absorptiometric molybdenum blue method)
BS 1728:14
1965
Methods for the analysis of aluminium and aluminium alloys. Determination of nickel (gravimetric method)
BS 1728:15
1966
Methods for the analysis of aluminium and aluminium alloys. Determination of nickel (photometric method)
BS 1728:16
1968
Methods for the analysis of aluminium and aluminium alloys. Determination of chromium (photometric method)
BS 1728:17
1968
Methods for the analysis of aluminium and aluminium alloys. Determination of chromium (volumetric method)
BS 1728:18
1970
Methods for the analysis of aluminium and aluminium alloys. Determination of zinc (ion-exchange-volumetric EDTA or polarographic method)
BS 1728:19
1971
Methods for the analysis of aluminium and aluminium alloys. Determination of magnesium (atomic absorption method)
BS 1728:20
1971
Methods for the analysis of aluminium and aluminium alloys. Determination of lead (atomic absorption method)
BS 1728:22
1972
Methods for the analysis of aluminium and aluminium alloys. Determination of magnesium (volumetric CDTA method)
BS 1728:23
1976
Methods for the analysis of aluminium and aluminium alloys. Copper (atomic absorption method)
BS 1728:24
1976
Methods for the analysis of aluminium and aluminium alloys. Nickel (atomic absorption method)
BS 1728:25
1980
Methods for the analysis of aluminium and aluminium alloys. Titanium (spectrophotometric chromotropic acid method)
BS 1729
1952
Green protective spectacles and screens for steelworks operatives
BS 1730
1951
Seamless low carbon and carbon molybdenum steel furnace tubes for the petroleum industry
BS 1731
1951
Seamless alloy steel furnace tubes for the petroleum industry
BS 1733
1955
Flow cups and methods of use (for the consistency control of industrial materials such as paints and varnishes)
BS 1734
1951
Specification for micrometer heads
BS 1735
1966
Flanged cast iron outside-screw-and-yoke wedge gate valves, Class 125, sizes 11/2 in to 24 in, for the petroleum industry
BS 1736
1951
Filling ratios for liquefiable gases
BS 1737
1951
Jointing materials and compounds for water, town gas and low-pressure steam installations
BS 1739
1982
Specification for filter flasks
BS 1740
1965
Specification for wrought steel pipe fittings (screwed BS 21 R-series thread)
BS 1741:8
1988
Methods for chemical analysis of liquid milk and cream. Determination of chloride content of liquid milk
BS 1741:9
1988
Methods for chemical analysis of liquid milk and cream. Determination of ash from liquid milk
BS 1741:10.2
1989
Methods for chemical analysis of liquid milk and cream. Determination of titratable acidity. Method for cream
BS 1741:11
1989
Methods for chemical analysis of liquid milk and cream. Detection of detergent/disinfectant residues
BS 1741:12
1992
Methods for chemical analysis of liquid milk and cream. Determination of total phosphorus content of milk
BS 1741:13
1998
Methods for chemical analysis of liquid milk and cream. Determination of lactulose content of heat-treated milk (HPLC method)
BS 1741:1
1987
Methods for chemical analysis of liquid milk and cream. General introduction including preparation of samples
BS 1741:2
1990
Methods for chemical analysis of liquid milk and cream. Determination of total solids content of liquid milk, cream and unsweetened condensed milk
BS 1741:5.1
1988
Methods for chemical analysis of liquid milk and cream. Determination of the nitrogen content of liquid milk. Reference method
BS 1741:5.2
1990
Methods for chemical analysis of liquid milk and cream. Determination of the nitrogen content of liquid milk. Routine method
BS 1741:6.1
1990
Methods for chemical analysis of liquid milk and cream. Determination of casein nitrogen content of liquid milk. Reference method
BS 1741:6.2
1990
Methods for chemical analysis of liquid milk and cream. Determination of casein nitrogen content of liquid milk. Routine method
BS 1741:7.1
1989
Methods for chemical analysis of liquid milk and cream. Determination of lactose content. Reference method
BS 1741:7.2
1989
Methods for chemical analysis of liquid milk and cream. Determination of lactose content. Routine method
BS 1742:1
1990
Methods for chemical analysis of condensed milks. General introduction, including preparation of test samples
BS 1742:2
1990
Methods for chemical analysis of condensed milks. Determination of total solids content of sweetened condensed milks
BS 1742:4
1991
Methods for chemical analysis of condensed milks. Determination of ash from condensed milks
BS 1742:5.1
1991
Methods for chemical analysis of condensed milks. Determination of nitrogen content. Reference method
BS 1742:5.2
1991
Methods for chemical analysis of condensed milks. Determination of nitrogen content. Routine method
BS 1742:6
1990
Methods for chemical analysis of condensed milks. Determination of sucrose content of sweetened condensed milk
BS 1743:4
1980
Methods for analysis of dried milk and dried milk products. Determination of the dispersibility and the wetting time of instant dried milk
BS 1743:5
1992
Methods for analysis of dried milk and dried milk products. Determination of bulk density
BS 1743:6.1
1983
Methods for analysis of dried milk and dried milk products. Assessment of the heat class of dried milk. Heat number method (reference method)
BS 1743:7.1
1982
Methods for analysis of dried milk and dried milk products. Determination of the titratable acidity of dried milk. Reference method
BS 1743
1968
Methods for analysis of dried milk and dried milk products
BS 1743:1
1986
Methods for analysis of dried milk and dried milk products. General introduction, including preparation of laboratory samples
BS 1743:3
1988
Methods for analysis of dried milk and dried milk products. Determination of insolubility index
BS 1743:7.2
1982
Methods for analysis of dried milk and dried milk products. Determination of the titratable acidity of dried milk. Routine method
BS 1743:8
1987
Methods for analysis of dried milk and dried milk products. Determination of lactic acid and lactates content of dried milk
BS 1743:16.1
1983
Methods for analysis of dried milk and dried milk products. Determination of nitrate and nitrite contents. Method for dried milk by cadmium reduction
BS 1743:16.3
1987
Methods for analysis of dried milk and dried milk products. Determination of nitrate and nitrite contents. Screening method for nitrate content by cadmium reduction and spectrometry
BS 1743:19
1985
Methods for analysis of dried milk and dried milk products. Determination of scorched particles content
BS 1743:20
1988
Methods for analysis of dried milk and dried milk products. Determination of sodium and potassium contents of dried milk
BS 1743:21
1996
Methods for analysis of dried milk and dried milk products. Determination of white flecks number of dried whole milk
BS 1744
1960
Tests for agricultural tractors
BS 1745
1951
Specification for alternating-current relays for railway signalling: track relays (double-element, 2-position), line relays (single-element, 2-position)
BS 1746
1987
Specification for domestic pressure cookers
BS 1747:1
1969
Methods for the measurement of air pollution. Deposit gauges
BS 1747:2
1969
Methods for the measurement of air pollution. Determination of concentration of suspended matter
BS 1747:3
1969
Methods for measurement of air pollution. Determination of sulphur dioxide
BS 1747-4
1969
Methods for measurement of air pollution. The lead dioxide method
BS 1747:5
1972
Methods for the measurement of air pollution. Directional dust gauges
BS 1747:6
1983
Methods for measurement of air pollution. Sampling equipment used for the determination of gaseous sulphur compounds in ambient air
BS 1747:7
1983
Methods for measurement of air pollution. Determination of mass concentration of sulphur dioxide in ambient air: Thorin spectrophotometric method
BS 1747:9
1987
Methods for measurement of air pollution. Determination of the mass concentration of nitrogen oxides in ambient air: chemiluminescence method
BS 1747:10
1990
Methods for measurement of air pollution. Determination of the mass concentration of sulphur dioxide in ambient air: tetrachloromercurate (TCM)/pararosaniline method
BS 1747:11
1993
Methods for measurement of air pollution. Determination of a black smoke index in ambient air
BS 1747:12
1993
Methods for measurement of air pollution. Determination of the mass concentration of ozone in ambient air: chemiluminescence method
BS 1747:13
1994
Methods for measurement of air pollution. Determination of the particulate lead content of aerosols collected on filters: atomic absorption spectrometric method
BS 1748:6
1960
Methods for the analysis of copper alloys. Method for the determination of tin in copper alloys (nickel coil reduction method)
BS 1748:7
1960
Methods for the analysis of copper alloys. Method for the determination of silicon in copper alloys (photometric method)
BS 1748:8
1960
Methods for the analysis of copper alloys. Method for the determination of phosphorus in copper alloys (photometric method)
BS 1748:8
1960
Methods for the analysis of copper alloys. Method for the determination of phosphorus in copper alloys (photometric method)
BS 1748:9
1963
Methods for the analysis of copper alloys. Method for the determination of zinc in copper alloys
BS 1749
1985
Recommendations for alphabetical arrangement and the filing order of numbers and symbols
BS 1750
1961
Bolting for the petroleum industry
BS 1751
1997
Laboratory glassware. Specification for straight-bore glass stopcocks for general purposes
BS 1752
1983
Specification for laboratory sintered or fritted filters including porosity grading
BS 1753
1977
Specification for safety requirements for children's cots for domestic use
BS 1754
1961
Steel barns with curved roofs
BS 1755
1951
Glossary of terms used in the plastics industry
BS 1756:1
1971
Methods for the sampling and analysis of flue gases. Methods of sampling
BS 1756:2
1971
Methods for the sampling and analysis of flue gases. Analysis by the Orsat apparatus
BS 1756:3
1971
Methods for the sampling and analysis of flue gases. Analysis by the Haldane apparatus
BS 1756:4
1977
Methods for sampling and analysis of flue gases. Miscellaneous analyses
BS 1756:5
1971
Methods for sampling and analysis of flue gases. Semi-routine analyses
BS 1757
1986
Specification for power-driven mobile cranes
BS 1758
1966
Specification for fireclay refractories (bricks and shapes)
BS 1759
1969
Specification for knurling wheels
BS 1760
1951
Carbon steel castings for resistance to wear and suitable for surface hardening
BS 1761
1951
Specification for single bucket excavators of the crawler-mounted friction-driven type
BS 1762
1951
Woollen felt and woollen mixture felt
BS 1763
1975
Specification for thin PVC sheeting (calendered, flexible, unsupported)
BS 1764
1973
Specification for nominal diameters of round built-up tins
BS 1765:1
1990
Hospital bedside lockers. Specification for general purpose bedside lockers for patients
BS 1765:2
1976
Specification for hospital bedside lockers. General purpose lockers of wooden construction with facilities for hanging day clothes
BS 1766
1951
Dry batteries for domestic radio receivers
BS 1767
1951
Specification for grommets for general purposes (rubber and rubber-like materials)
BS 1768
1963
Specification for Unified precision hexagon bolts, screws, & nuts (UNC & UNF threads). Normal series
BS 1769
1951
Specification. Unified black hexagon bolts, screws, nuts (UNC & UNF threads). Heavy series
BS 1770
1951
Pipe flanges for use on internal combustion engines and installations
BS 1771:1
1989
Fabrics for uniforms and workwear. Specification for fabrics of wool and wool blends
BS 1771:2
1990
Fabrics for uniforms and workwear. Specification for fabrics from cellulosic fibres, synthetic fibres and blends
BS 1771P
1961
Standard patterns for outdoor uniform cloths for fire service, local authority and hospital staff
BS 1772
1972
Specification for sizes of black-and-white photographic sheet film for general, professional and industrial use
BS 1773
1951
Hydraulic lifts for agricultural trailed implements
BS 1774
1961
Rainwear from PVC sheeting
BS 1775
1964
Steel tubes for mechanical, structural and general engineering purposes
BS 1776
1951
Specification for the fabrication of lightweight articles (other than rainwear) from polyvinyl chloride sheeting
BS 1777
1981
Specification for glass honey jars
BS 1779
1952
Round built-up tins for photographic supplies
BS 1780
1960
Specification for bourdon tube pressure and vacuum gauges
BS 1781
1981
Specification for linen and linen union textiles
BS 1782
1951
Specification for couplings for suction and delivery hose (11/2 in. to 8 in. nominal sizes) other than fire hose couplings
BS 1783
1951
Coloured pitch mastic flooring incorporating lake asphalt and bitumen
BS 1784
1964
Schedule of tests for carburetted water-gas plant
BS 1785
1951
Thermal insulating materials for buildings
BS 1786
1963
Steel wheelbarStandards, general purpose type
BS 1787
1951
Steel windows for industrial buildings
BS 1788
1964
Street lighting lanterns for use with electric lamps
BS 1789
1951
Electric heating pads
BS 1790
1961
Specification for length bars and their accessories (imperial units)
BS 1792
1960
Specification for one-mark volumetric flasks
BS 1793
1952
Audio-frequency transformers for cinematograph equipment
BS 1794
1952
Specification for chart ranges for temperature recording instruments
BS 1795
1965
Specification for extenders for paints
BS 1796:1
1989
Test sieving. Methods using test sieves of woven wire cloth and perforated metal plate
BS 1797
1987
Schedule for tables for use in the calibration of volumetric glassware
BS 1798
1951
Symbols, terms and definitions for gas quantities in reciprocating internal combustion engines (excluding carburettor type)
BS 1799
1952
Power rating of valve-driven high-frequency induction heating equipment
BS 1800
1951
Methods for the analysis of raw copper
BS 1801
1956
Specification for tagged boot and shoe laces (cotton)
BS 1802
1951
Specification for steel spring washers for general engineering and automobile purposes
BS 1803
1952
Surgical rubber gloves
BS 1804:1
1966
Specification for parallel steel dowel pins. Inch series
BS 1804:2
1968
Specification for parallel steel dowel pins. Metric series
BS 1804:3
1973
Specification for parallel steel dowel pins. Parallel and taper types having screw threads for extraction purposes. Metric series
BS 1805
1963
Notes on methods of screening hospital patients
BS 1806
1989
Specification for dimensions of toroidal sealing rings ('O'-rings) and their housings (inch series)
BS 1807
1981
Specification for marine main propulsion gears and similar drives: metric module
BS 1808
1985
Specification for cut business forms and letterheads
BS 1809
1983
Specification for flanged bobbins for doubling and twisting
BS 1810
1951
Condenser bobbins for mules (cotton waste and woollen spinning trades)
BS 1812
1951
Specification for textile screening cloths
BS 1813
1974
Specification for dimensions of conduit dies, diestocks and guides
BS 1814
1952
Marking system for grinding wheels
BS 1816
1957
Heavy duty cooking ranges (solid fuel)
BS 1817
1963
Specification for tins for honey
BS 1818
1961
Specification for bordered mattresses (excluding cellular rubber mattresses) for hospitals, institutions and government departments
BS 1820
1961
Specification for vegetable parchment for wrapping dairy and other food products
BS 1821
1982
Specification for class I oxy-acetylene welding of ferritic steel pipework for carrying fluids
BS 1822
1952
Specification for nickel clad steel plate
BS 1823
1973
Specification for stainless steel hollow-ware for use in hospital operating-theatres and wards
BS 1824
1963
Nickel silver strip and foil for the telecommunication industries. 2 per cent nickel silver: 18 per cent nickel silver
BS 1825
1952
Method for the determination of cadmium in copper-cadmium alloys (electrolytic method)
BS 1826
1952
Reference tables for platinum/rhodium v. platinum thermocouples
BS 1827
1952
Reference tables for nickel/chromium v. nickel/aluminium thermocouples
BS 1828
1961
Reference tables for copper v. constantan thermocouples
BS 1829
1962
Reference tables for iron v. constantan thermocouples
BS 1832
1991
Specification for compressed asbestos fibre jointing
BS 1833
1952
Cooker control units at 30 amperes, 250 volts single-phase a.c. only
BS 1834
1968
Specification for isopropyl acetate
BS 1835
1991
Specification for 2-ethylhexan-1-ol for industrial use
BS 1836
1974
Flyer bobbins
BS 1837
1970
Methods for the sampling of iron, steel, permanent magnet alloys and ferro-alloys
BS 1838
1952
Milk strainers
BS 1839
1952
London pattern pulley blocks for fibre rope
BS 1840
1960
Specification for steel columns for street lighting
BS 1841:1
1996
Rear-mounted, three-point linkage on agricultural wheeled tractors. Specification for categories 1, 2, 3 and 4
BS 1842
1952
Specification for double-ended open-jawed spanners for B.A. hexagon sizes
BS 1843
1952
Colour code for twin compensating cables for thermocouples
BS 1846:1
1994
Glossary of terms relating to solid fuel burning equipment. Domestic appliances
BS 1846:2
1968
Glossary of terms relating to solid fuel burning equipment. Industrial water heating and steam raising installations
BS 1847
1952
Graduated beakers for injectable fluids (for hospital use)
BS 1848
1952
Glass condensers
BS 1850
1970
Specification for elastic flat braids containing natural rubber with cotton, rayon or nylon
BS 1851
1978
Specification for titanium dioxide pigments for paints
BS 1852
1952
Specification for marking codes for resistors and capacitors
BS 1853:2
1995
Tubular fluorescent lamps for general lighting service. Specification for lamps used in the United Kingdom not included in BS EN 60081, BS EN 60901, BS EN 61195 and BS EN 61199
BS 1854
1952
Bed strippers for use in hospitals
BS 1855
1952
Dimensions of bifurcated, tubular and semi-tubular rivets for general purposes
BS 1856
1964
General requirements for the metal-arc welding of mild steel
BS 1857
1952
Pipe cutters
BS 1858
2002
Electric cables. Accessories. Bitumen-based filling compounds
BS 1859
1976
Specification for cast aluminium saucepans and frying pans
BS 1862
1959
Cables for vehicles
BS 1863
1952
Specification for felt backed linoleum
BS 1864
1966
Specification for stainless steel milk pipes and fittings (recessed ring joint type)
BS 1865
1952
Specification for air rings (hand made) for hospital use
BS 1867
1952
Solid drawn aluminium bronze tubes for general purposes (7 per cent aluminium)
BS 1868
1975
Specification for steel check valves (flanged and butt-welding ends) for the petroleum, petrochemical and allied industries
BS 1869
1960
Protective helmets for racing motor cyclists
BS 1871
1952
Minimum requirements for silvering for glass reflectors for lighting purposes
BS 1872
1984
Specification for electroplated coatings of tin
BS 1873
1975
Specification for steel globe and globe stop and check valves (flanged and butt-welding ends) for the petroleum, petrochemical and allied industries
BS 1874
1952
Sizes of packages for frozen food
BS 1875
1952
Specification for bi-pin lamp-holders for tubular fluorescent lamps for use in circuits the declared voltage of which does not exceed 250 volts
BS 1876
1990
Specification for automatic flushing cisterns for urinals
BS 1877-1
1971
Specification for domestic bedding. Spring interior mattresses for adult use (performance and construction)
BS 1877:8
1974
Domestic bedding. Pillows and bolsters for domestic use (excluding cellular rubber pillows and bolsters)
BS 1877-9
1975
Domestic bedding. Upholstered wood-framed divans
BS 1877:10
1997
Domestic bedding. Specification for mattresses and bumpers for children's cots, perambulators and similar domestic articles
BS 1878
1973
Specification for corrugated copper jointing strip for expansion joints for use in general building construction
BS 1879
1952
Specification for dimensions of 135-size photographic film and magazine
BS 1880
1952
Workroom stands for infants' and girls' coats
BS 1881:5
1970
Testing concrete. Methods of testing hardened concrete for other than strength
BS 1881:106
1983
Testing concrete. Methods for determination of air content of fresh concrete
BS 1881:108
1983
Testing concrete. Method for making test cubes from fresh concrete
BS 1881:109
1983
Testing concrete. Method for making test beams from fresh concrete
BS 1881:110
1983
Testing concrete. Method for making test cylinders from fresh concrete
BS 1881:111
1983
Testing concrete. Method of normal curing of test specimens (20°C method)
BS 1881:112
1983
Testing concrete. Methods of accelerated curing of test cubes
BS 1881:113
1983
Testing concrete. Method for making and curing no-fines test cubes
BS 1881:114
1983
Testing concrete. Methods for determination of density of hardened concrete
BS 1881:115
1986
Testing concrete. Specification for compression testing machines for concrete
BS 1881:116
1983
Testing concrete. Method for determination of compressive strength of concrete cubes
BS 1881:117
1983
Testing concrete. Method for determination of tensile splitting strength
BS 1881:118
1983
Testing concrete. Method for determination of flexural strength
BS 1881:119
1983
Testing concrete. Method for determination of compressive strength using portions of beams broken in flexure (equivalent cube method)
BS 1881:121
1983
Testing concrete. Method for determination of static modulus of elasticity in compression
BS 1881:122
1983
Testing concrete. Method for determination of water absorption
BS 1881:124
1988
Testing concrete. Methods for analysis of hardened concrete
BS 1881:125
1986
Testing concrete. Methods for mixing and sampling fresh concrete in the laboratory
BS 1881:127
1990
Testing concrete. Method of verifying the performance of a concrete cube compression machine using the comparative cube test
BS 1881:128
1997
Testing concrete. Methods for analysis of fresh concrete
BS 1881:129
1992
Testing concrete. Method for determination of density of partially compacted semi-dry fresh concrete
BS 1881:130
1996
Testing concrete. Method for temperature-matched curing of concrete specimens
BS 1881:131
1998
Testing concrete. Methods for testing cement in a reference concrete
BS 1881:201
1986
Testing concrete. Guide to the use of non-destructive methods of test for hardened concrete
BS 1881:202
1986
Testing concrete. Recommendations for surface hardness testing by rebound hammer
BS 1881:203
1986
Testing concrete. Recommendations for measurement of velocity of ultrasonic pulses in concrete
BS 1881:204
1988
Testing concrete. Recommendations on the use of electromagnetic covermeters
BS 1881:205
1986
Testing concrete. Recommendations for radiography of concrete
BS 1881:206
1986
Testing concrete. Recommendations for determination of strain in concrete
BS 1881:207
1992
Testing concrete. Recommendations for the assessment of concrete strength by near-to-surface tests
BS 1881:208
1996
Testing concrete. Recommendations for the determination of the initial surface absorption of concrete
BS 1881:209
1990
Testing concrete. Recommendations for the measurement of dynamic modulus of elasticity
BS 1882
1976
Specification for flexible polymeric tubing and drainage sheeting (radio-opaque) for medical use
BS 1883
1952
Rubber ward-dressing gloves and porters' gloves for hospital use
BS 1884
1952
Specification for rubber post-mortem gloves
BS 1885
1952
Specification. Synthetic-resin bonded-paper insulating tubes (rectangular cross-section) for electrical power circuits up to 1000 volts
BS 1886
1952
Terms and definitions for single point cutting tools for lathes, boring mills, planing, shaping and similar machines
BS 1887
1966
Specification for person weighing machines and height-measuring equipment for hospitals, welfare and health services
BS 1888
1972
Specification for precision reels for bare and oxidized resistance wires (0.010 mm to 0.125 mm diameter inclusive)
BS 1889
1952
Dimensions of foundry moulding boxes
BS 1890
1952
Honey extractors, strainers and bottling tanks
BS 1891
1965
Sizes of single-ply paper bags
BS 1892:1
1986
Gymnasium equipment. Specification of general requirements
BS 1892-2.1
1972
Specification for gymnasium equipment. Particular requirements. Wall bars, window ladders, booms, beam saddles and related equipment
BS 1892-2.3
1972
Gymnasium equipment. Particular requirements. Specification for boxes, bucks and horses
BS 1892-2.4
1972
Specification for gymnasium equipment. Particular requirements. Beating boards, spring boards, balancing benches and jump stands
BS 1892-2.5
1972
Specification for gymnasium equipment. Particular requirements. Gymnastic competition equipment
BS 1892:2.6
1986
Gymnasium equipment. Particular requirements. Specification for boxing rings
BS 1892:2.8
1986
Gymnasium equipment. Particular requirements. Specification for trampolines, mini-trampolines and safety harnesses (trampoline spotting rig)
BS 1892:2.9
1986
Gymnasium equipment. Particular requirements. Specification for weight training equipment
BS 1892:2.10
1990
Gymnasium equipment. Particular requirements. Specification for safety requirements for mats, mattresses and landing areas
BS 1892:2.11
1989
Gymnasium equipment. Particular requirements. Specification for practice and games netting and supporting trackways
BS 1892:3
2003
Gymnasium equipment. Sports mats. Specification for fire safety requirements for mats, mattresses and landing areas
BS 1892:4
2003
Gymnasium equipment. Sports mats. Specification for combat mats
BS 1893
1952
Specification for wooden domestic lattice steps and step stools
BS 1894
1992
Specification for design and manufacture of electric boilers of welded construction
BS 1895
1973
Specification for metal-framed wheeled screens for use in hospitals
BS 1896
1972
Specification for sizes of reprographic papers
BS 1897
1971
Specification for woven elastic webbings
BS 1898
1952
Rubber ice bags for hospital use
BS 1899
1963
Specification for pillows (excluding cellular rubber pillows) for hospitals, institutions and government departments
BS 1900
1976
Specification for secondary reference thermometers
BS 1902:11
1991
Methods of testing refractory materials. Refractory mortars and putties
BS 1902:7.5
1987
Methods of testing refractory materials. Unshaped refractories used in monolithic construction. Preparation of test pieces from mouldables and ramming mixes (method 1902-705)
BS 1902:7.6
1987
Methods of testing refractory materials. Unshaped refractories used in monolithic construction. Testing of materials as preformed test pieces
BS 1902-8
1988
Methods of testing refractory materials. Refractories containing carbon
BS 1902:9.1
1987
Methods of testing refractory materials. Chemical analysis by instrumental methods. Analysis of alumino-silicate refractories by X-ray fluorescence
BS 1902:9.2
1987
Methods of testing refractory materials. Chemical analysis by instrumental methods. Analysis of silica refractories by X-ray fluorescence
BS 1902:9.3
1998
Methods of testing refractory materials. Chemical analysis by instrumental methods. Determination of chromium (VI)
BS 1902:10.1
1993
Methods of testing refractory materials. Investment casting shell mould systems. Determination of resistance to deformation at elevated temperatures
BS 1902:10.2
1994
Methods of testing refractory materials. Investment casting shell mould systems. Determination of permeability and standard air flow capacity at elevated temperatures
BS 1902:10.2
1994
Methods of testing refractory materials. Investment casting shell mould systems. Determination of permeability and standard air flow capacity at elevated temperatures
BS 1902:3.0
1988
Methods of testing refractory materials. General and textural properties. Introduction
BS 1902:3.2
1981
Methods of testing refractory materials. General and textural properties. Measurement of dimensions of specimens for testing (methods 1902-302)
BS 1902:3.3
1981
Methods of testing refractory materials. General and textural properties. Sieve analysis (methods 1902-303)
BS 1902:3.5
1981
Methods of testing refractory materials. General and textural properties. Determination of powder density (method 1902-305)
BS 1902:3.10
1981
Methods of testing refractory materials. General and textural properties. Determination of resistance to carbon monoxide (method 1902-310)
BS 1902:3.11
1983
Methods of testing refractory materials. General and textural properties. Measurement of dimensions and shape of refractory bricks and blocks (methods 1902-311)
BS 1902:3.14
1996
Methods of testing refractory materials. General and textural properties. Determination of hydration tendency
BS 1902:3.16
1990
Methods of testing refractory materials. General and textural properties. Determination of pore size distribution (method 1902-316)
BS 1902:3.17
1990
Methods of testing refractory materials. General and textural properties. Determination of volume and bulk density of dense shaped products (methods 1902-317)
BS 1902:3.19
1996
Methods of testing refractory materials. General and textural properties. Measurement of dimensions and external defects of refractory bricks. Dimensions and conformity to drawings
BS 1902:4.3
1985
Methods of testing refractory materials. Properties measured under an applied stress. Determination of cold crushing strength of dense shaped products (method 1902-403)
BS 1902:4.5
1984
Methods of testing refractory materials. Properties measured under an applied stress. Determination of modulus of rupture at elevated temperatures (method 1902-405)
BS 1902:4.6
1985
Methods of testing refractory materials. Properties measured under an applied stress. Determination of resistance to abrasion at ambient temperature (abradability index at ambient temperature) (method 1902-406)
BS 1902-4.7
1985
Methods of testing refractory materials. Properties measured under an applied stress. Determination of resistance to abrasion at elevated temperature up to 1400°C (abradability index at elevated temperatures) (method 1902-407)
BS 1902-4.8
1985
Methods of testing refractory materials. Properties measured under an applied stress. Determination of refractoriness-under-load (rising temperature test: dilatometer method) (method 1902-408)
BS 1902:5.0
1992
Methods of testing refractory materials. Refractory and thermal properties. Introduction
BS 1902:5.3
1990
Methods of testing refractory materials. Refractory and thermal properties. Determination of thermal expansion (horizontal method to 1100°C) (method 1902-503)
BS 1902:5.4
1989
Methods of testing refractory materials. Refractory and thermal properties. Determination of thermal expansion (for large test pieces) (method 1902-504)
BS 1902:5.5
1991
Methods of testing refractory materials. Refractory and thermal properties. Determination of thermal conductivity (panel/calorimeter method) (method 1902-505)
BS 1902-5.6
1985
Methods of testing refractory materials. Refractory and thermal properties. Determination of thermal conductivity (hot wire method) (method 1902-506)
BS 1902:5.8
1992
Methods of testing refractory materials. Refractory and thermal properties. Determination of thermal conductivity (split column method) (method 1902-508)
BS 1902:5.9
1985
Methods of testing refractory materials. Refractory and thermal properties. Determination of permanent change in dimensions on heating of shaped insulating products (method 1902-509)
BS 1902:5.11
1986
Methods of testing refractory materials. Refractory and thermal properties. Determination of thermal spalling resistance by the prism test (method 1902-511)
BS 1902:5.13
1984
Methods of testing refractory materials. Refractory and thermal properties. Determination of resistance to attack by slag (method 1902-513)
BS 1902:5.14
1992
Methods of testing refractory materials. Refractory and thermal properties. Determination of thermal expansion (temperatures up to 1500°C) (methods 1902-5.14)
BS 1902:6
1986
Methods of testing refractory materials. Ceramic fibre products
BS 1902:7.0
1987
Methods of testing refractory materials. Unshaped refractories used in monolithic construction. Introduction and definitions
BS 1902:7.1
1987
Methods of testing refractory materials. Unshaped refractories used in monolithic construction. Guidance on sampling (of unshaped refractories)
BS 1902:7.2
1987
Methods of testing refractory materials. Unshaped refractories used in monolithic construction. Testing of material as supplied and received (method 1902-702)
BS 1902:7.3
1987
Methods of testing refractory materials. Unshaped refractories used in monolithic construction. Preparation of test pieces from dense castables by vibration (method 1902-703)
BS 1902:7.4
1987
Methods of testing refractory materials. Unshaped refractories used in monolithic construction. Preparation of test pieces from insulating castables (method 1902-704)
BS 1903
1981
Glossary of terms used by the clothing industry
BS 1904
1964
Specification for industrial platinum resistance thermometer sensors
BS 1905
1965
Engine lubricating oils (detergent types)
BS 1906
1952
Specification for hose couplings (air and water) (1/8 in. to 11/4 in. nominal sizes)
BS 1907
1964
Industrial overalls for general purposes
BS 1908
1952
Berets of knitted wool
BS 1909
1963
Adding machines
BS 1910
1966
Specification for carbolic soap
BS 1911
1990
Specification for hard soap
BS 1912
1990
Specification for soap flakes
BS 1913
1990
Specification for soft soap
BS 1915
1968
Specification for still projectors
BS 1916:1
1953
Limits and fits for engineering. Limits and tolerances
BS 1916:2
1953
Limits and fits for engineering. Guide to the selection of fits in BS 1916:Part 1
BS 1916:3
1963
Limits and fits for engineering. Recommendations for tolerances, limits and fits for large diameters
BS 1917
1968
Specification for slides and film strips
BS 1918:1
1978
Glass container finishes. Specification for continuous thread finish
BS 1918:2
1981
Glass container finishes. Specification for cStandardn finish
BS 1919:1
1993
Hacksaw blades. Specification for hand and machine hacksaw blades
BS 1919:2
1995
Hacksaw blades. Specification for cutting performance
BS 1920
1955
Grading of honey
BS 1921
1990
Dispensing measures for pharmaceutical purposes (imperial units)
BS 1921
1953
Dispensing measures for pharmaceutical purposes (imperial units)
BS 1922
1987
Specification for glass dispensing measures for pharmaceutical purposes
BS 1923
1953
Specification for glass filter funnels
BS 1924:1
1990
Stabilized materials for civil engineering purposes. General requirements, sampling, sample preparation and tests on materials before stabilization
BS 1924:2
1990
Stabilized materials for civil engineering purposes. Methods of test for cement-stabilized and lime-stabilized materials
BS 1925
1962
Capacity of glass milk bottles
BS 1926
1962
Ready-mixed concrete
BS 1927
1953
Dimensions of circular cone diaphragm loudspeakers
BS 1928
1965
Specification for processed disk records and reproducing equipment
BS 1929
1953
Specification for screw threads and external dimensions of lamps for endoscopic and diagnostic instruments
BS 1932-1
1965
Testing the strength of yarns and threads from packages. Methods for determination of breaking strength and breaking extension
BS 1932:2
1989
Testing the strength of yarns and threads from packages. Methods for determination of knot strength and loop strength
BS 1933
1953
Varnish-bonded copper conductors
BS 1934
1953
Rubber footwear
BS 1935
1972
Specification for spindle noses and adjustable adaptors for multi-spindle heads
BS 1936:2
1991
Undercuts and runouts for screw threads. Specification for ISO metric screw threads
BS 1937
1953
Specification for engineers' ratchet braces and drilling pillars
BS 1938
1960
Instrument tables (rectangular and curved) for use in hospital operating theatres
BS 1939
1967
Specifications for sunflower seed oil for general purposes
BS 1940
1987
Specification for butanone (ethyl methyl ketone) for industrial use
BS 1941
1993
Specification for 4-methylpentan-2-one (isobutyl methyl ketone) for industrial use
BS 1942
1953
Aluminium filler alloys for brazing
BS 1943
1989
Specification for woodworking chisels and gouges
BS 1944
1973
Specification for woven asbestos tape for electrical insulating purposes
BS 1945
1971
Specification for fireguards for heating appliances (gas, electric and oil-burning)
BS 1946
1953
Flat dies for thread rolling
BS 1947
1953
Circular dies for thread rolling
BS 1948
1963
Copper-silicon rods, sections, forging stock and forgings
BS 1949
1950
60/40 brass rods, sections, forging stock and forgings
BS 1949
1963
60/40 brass rods, sections, forging stock and forgings
BS 1950
1953
Vitreous enamelled steel reflectors for use with mercury electric discharge lamps (Types MB/V and MA/V)
BS 1950
1971
Vitreous enamelled steel reflectors for use with mercury electric discharge lamps (Types MB/V and MA/V)
BS 1951
1953
Thermosetting synthetic-resin bonded-paper round tubes for use at radio frequencies
BS 1952
1964
Copper alloy gate valves for general purposes
BS 1953
1964
Copper alloy check valves for general purposes
BS 1955
1981
Method for determination of dimensional changes of wool-containing fabrics during washing
BS 1956
1953
1 per cent chromium steel castings for resistance to corrosion
BS 1957
1953
Presentation of numerical values (fineness of expression; rounding of numbers)
BS 1958
1953
Specification for tools for soldered socket-spigot joints for lead and lead alloy pipes
BS 1959
1964
Ironing tables
BS 1961
1953
Enamelled round copper wire (oleo-resinous enamel). Metric units
BS 1962
1967
Patients' trolleys (fixed top) for indoor use in hospitals
BS 1963
1990
Specification for pressure operated relay valves for domestic, commercial and catering gas appliances
BS 1964
1953
Tolerances on diameters of carbons for projection arcs and stage arcs
BS 1965:1
1963
Specification for butt-welding pipe fittings for pressure purposes. Carbon steel
BS 1965-2
1964
Austenitic stainless steel
BS 1966
1967
Domed ends for tanks and pressure vessels
BS 1968
1953
Specification for floats for ballvalves (copper)
BS 1969
1953
Tests for performance characteristics of sintered filters
BS 1970
2001
Hot water bottles manufactured from rubber and PVC. Specification
BS 1971
1969
Specification for corrugated furnaces for shell boilers
BS 1972
1967
Specification for polythene pipe (Type 32) for above ground use for cold water services
BS 1973
1970
Specification for polythene pipe (Type 32) for general purposes including chemical and food industry uses
BS 1974
1953
Specification for large aluminium alloy rivets (1/2 in. to 1 in. nominal diameters)
BS 1975
1957
Specification. Primary cells and batteries for intrinsically safe circuits in coal mines
BS 1976
1953
Hospital ward cots for adults
BS 1977
1976
Specification for high conductivity copper tubes for electrical purposes
BS 1978
1989
Specification for bit braces
BS 1978
1965
Specification for bit braces
BS 1979
1985
Specification for hospital ward bedsteads for psychiatric hospitals
BS 1980
1953
Portable electric hand-lamps (open type with protective guard)
BS 1981
1991
Specification for unified machine screws and machine screw nuts
BS 1982:0
1990
Fungal resistance of panel products made of or containing materials of organic origin. Guide to methods for determination
BS 1982:1
1990
Fungal resistance of panel products made of or containing materials of organic origin. Method for determination of resistance to wood-rotting Basidiomycetes
BS 1982:2
1990
Fungal resistance of panel products made of or containing materials of organic origin. Method for determination of resistance to cellulose-decomposing microfungi
BS 1982:3
1990
Fungal resistance of panel products made of or containing materials of organic origin. Methods for determination of resistance to mould or mildew
BS 1983:1
1969
Specification for chucks for machine tools and portable power tools. Tool-holding chucks
BS 1983:2
1994
Chucks for machine tools and portable power tools. Specification for workholding chucks, power operated
BS 1983:3
1987
Chucks for machine tools and portable power tools. Specification for dimensions of collet pads for base jaws of power operated workholding chucks
BS 1983:4
1987
Chucks for machine tools and portable power tools. Specification of criteria to be stated affecting performance of power operated workholding chucks at speed
BS 1983:5
1989
Chucks for machine tools and portable power tools. Code of practice for the safe operation of workholding chucks used on lathes
BS 1983:6
1994
Chucks for machine tools and portable power tools. Specification for jaw serrations, interfaces and tee nuts
BS 1983:7
1994
Chucks for machine tools and portable power tools. Specification for workholding chucks with 2-piece jaws, power operated
BS 1984
1967
Specification for gravel aggregates for surface treatment (including surface dressings) on roads
BS 1986
1964
Specification for design and dimensional features of measuring and control instruments for industrial processes
BS 1987
1953
Classification of diamond powder in the sieve and sub-sieve ranges
BS 1988
1953
Measurement of frequency variation in sound recording and reproduction
BS 1989
1953
Memorandum on values for the properties of high conductivity copper
BS 1990:1
1984
Wood poles for overhead power and telecommunication lines. Specification for softwood poles
BS 1992
1953
Butyl acetylricinoleate
BS 1993
1968
Butan-2-ol (secbutyl alcohol)
BS 1994
1993
Specification for dichloromethane (methylene chloride)
BS 1997
1973
Specification for glycerol triacetate
BS 1998
1970
Specification for triphenyl phosphate
BS 1999
1964
Specification for tritolyl phosphate