All Carnegie Library of Pittsburgh locations will be closed on Wednesday, December 24, Thursday, December 25 and Thursday, January 1, 2015. In addition, the Library will close at 5 pm Wednesday, December 31, 2014.

Tools

Topics & Collections

small text medium text large text

BSI Standards List

Standard
Year
Title
BS EN 3955
2001
Aerospace series. Silver base alloy AG-B12401 (AgCu40Zn5Ni). Filler metal for brazing. Rolled foil
BS EN 3956
2001
Aerospace series. Silver base alloy AG-B14001 (AgCu42Ni2). Filler metal for brazing. Wire
BS EN 3957
2001
Aerospace series. Silver base alloy AG-B14001 (AgCu42Ni2). Filler metal for brazing. Powder or paste
BS EN 3958
2001
Aerospace series. Silver base alloy AG-B14001 (AgCu42Ni2). Filler metal for brazing. Rolled foil
BS EN 3959
2001
Aerospace series. Cobalt base alloy CO-B41601 (CoCr19Ni17Si8W4). Filler metal for brazing. Powder or paste
BS EN 3961
2001
Aerospace series. Gold base alloy AU-B4000. Filler metal for brazing. Rolled foil
BS EN 3962
2001
Aerospace series. Gold base alloy AU-B40001. Filler metal for brazing. Wire
BS EN 3963
2001
Aerospace series. Copper CU-BU9001. Filler metal for brazing. Rolled foil
BS EN 3964
2001
Aerospace series. Copper CU-BU9001. Filler metal for brazing. Wire
BS EN 3965
2001
Aerospace series. Titanium alloy TI-B17001. Filler metal for brazing. Rolled foil
BS EN 4013
2004
Aerospace series. Shank nuts, self-locking, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated. Classification: 1550 MPa (at ambient temperature)/600°C
BS EN 4017
2001
Aerospace series. Pipe coupling 8°30' in titanium alloy. Elbows 90°
BS EN 4018
2001
Aerospace series. Pipe coupling 8°30' in titanium alloy. Elbows 90° with thrust wire nut
BS EN 4019
2001
Aerospace series. Pipe coupling 8°30' in titanium alloy. Elbows 90°, welded
BS EN 4020
2001
Aerospace series. Pipe coupling 8°30' in titanium alloy. Elbows 90°, welded end with thrust wire nut
BS EN 4021
2001
Aerospace series. Pipe coupling 8°30' in titanium alloy. Elbows 90°, bulkhead
BS EN 4022
2001
Aerospace series. Pipe coupling 8°30' in titanium alloy. Elbows 90°, bulkhead, welded end
BS EN 4023
2001
Aerospace series. Pipe coupling 8°30' in titanium alloy. Elbows 45°
BS EN 4024
2001
Aerospace series. Pipe coupling 8°30' in titanium alloy. Elbows 45° welded end with thrust wire nut
BS EN 4025
2001
Aerospace series. Pipe coupling 8°30' in titanium alloy. Elbows 45°, bulkhead
BS EN 4026
2001
Aerospace series. Pipe coupling 8°30' in titanium alloy. Tees
BS EN 4027
2001
Aerospace series. Pipe coupling 8°30' in titanium alloy. Tees branch with thrust wire nut
BS EN 4028
2001
Aerospace series. Pipe coupling 8°30' in titanium alloy. Tees with thrust wire nut on run
BS EN 4029
2001
Aerospace series. Pipe coupling 8°30' in titanium alloy. Tees bulkhead branch
BS EN 4030
2001
Aerospace series. Pipe coupling 8°30' in titanium alloy. Tees bulkhead on run
BS EN 4031
2001
Aerospace series. Pipe coupling 8°30' in titanium alloy. Nut for welded union
BS EN 4032
2001
Aerospace series. Pipe coupling 8°30' in titanium alloy. Thrust wire
BS EN 4045
2001
Aerospace series. Capillary tubes, seamless in heat resisting alloys. Diameter 0,6 mm ? D ? 2 mm. Dimensions
BS EN 4051
2002
Aerospace series. Pipe couplings, 60°, spherical, in titanium alloy. Port connection
BS EN 4058
2001
Aerospace series. Filler rods and filler wires for welding in titanium and titanium alloys. Diameter 0,5 mm ? D ? 5,0 mm. Dimensions
BS EN 4059
2001
Aerospace series. Filler rods and filler wire for welding in steel. Diameter 0,5 mm ? D ? 5,0 mm. Dimensions
BS EN 4060
2001
Aerospace series. Filler rods and filler wires for welding in heat resisting alloys. Diameter 0,5 mm ? D ? 5,0 mm. Dimensions
BS EN 4069
1996
Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel, passivated. Classification: 600MPa (at ambient temperature)/650°C
BS EN 4085
2001
Aerospace series. Nickel base alloy NI-B40002 (NiSi4B2). Filler metal for brazing. Amorphous foil
BS EN 4103
2001
Aerospace series. Nickel base alloy NI-B40002 (NiSi4B2). Filler metal for brazing. Borided foil
BS EN 4104
2001
Aerospace series. Nickel base alloy NI-B40002. Filler metal for brazing. Powder or paste.
BS EN 4105
1998
Nickel base alloy NI-B40002 (NiSi4B2). Filler metal for brazing. Tape
BS EN 4113
2001
Aerospace series. Clamps, loop (P type) in corrosion resisting steel with rubber cushioning. Dimensions and masses
BS EN 4114
2001
Aerospace series. Clamps, loop ("P" type) in aluminium alloy with rubber cushioning. Dimensions and masses
BS EN 4115
2001
Aerospace series. Cushion, rubber for clamps. Dimensions, masses
BS EN 4179
2000
Qualification and approval of personnel for non-destructive testing
BS EN 4180
2002
Aerospace series. Circular tubes, for fluids in titanium and titanium alloys. Wide tolerances. Diameter 4 mm ? D ? 40 mm. Dimensions
BS EN 4182
2001
Aerospace series. Pipe coupling 8°30' in titanium alloy. Tees, reduced
BS EN 4183
2001
Aerospace series. Pipe coupling 8°30' in titanium alloy. Elbows 90° welded ends
BS EN 4184
2001
Aerospace series. Pipe coupling 8°30' in titanium alloy. Elbows 45° double, welded ends
BS EN 4185
2001
Aerospace series. Pipe coupling 8°30' in titanium alloy. Tees, bulkhead on run long
BS EN 4186
2001
Aerospace series. Pipe coupling 8°30' in titanium alloy. Unions, cross
BS EN 4187
2001
Aerospace series. Pipe coupling 8°30' in titanium alloy. Elbows 90°, bulkhead, long
BS EN 4188
2001
Aerospace series. Pipe coupling 8°30' in titanium alloy. Elbows 90° bulkhead, long, welded end
BS EN 4189
2001
Aerospace series. Pipe coupling 8°30' in titanium alloy. Tees, bulkhead branch long
BS EN 4190
2001
Aerospace series. Pipe coupling 8°30' in titanium alloy. Tees, reduced with thrust wire nut on run
BS EN 4191
2001
Aerospace series. Pipe coupling 8°30' in titanium alloy. Tees, reduced, bulkhead branch, long
BS EN 4192
2001
Aerospace series. Pipe coupling 8°30' in titanium alloy. Tees, reduced bulkhead branch
BS EN 4193
2001
Aerospace series. Pipe coupling 8°30' in titanium alloy. Tees, reduced bulkhead on run long
BS EN 4194
2001
Aerospace series. Pipe coupling 8°30' in titanium alloy. Tees, reduced, bulkhead
BS EN 4233
2001
Aerospace series. Pipe coupling 8°30' in titanium alloy. Unions, welded, threaded
BS EN 4250
2001
Aerospace series. Nickel base alloys NI-B41001 (NiCr19Si7B). Filler metal for brazing. Amorphous foil
BS EN 4258
1998
Metallic materials. General organization of standardization. Links between types of EN standards and their use
BS EN 4267
2001
Aerospace series. Round bar in titanium and titanium alloys. Diameter 6 mm ? D ? 160 mm. Dimensions
BS EN 4324
2002
Aerospace series. Aluminium alloy AL-W42201. Filler metal for welding. Rod
BS EN 4325
2001
Aerospace series. Heat resisting alloy NI-WH1302 (NiCr20Co13Mo4Ti3AI). Filler metal for welding. Wire and rod
BS EN 4326
2001
Aerospace series. Heat resisting alloy CO-WH4102 (CoCr28W20Ni5V1). Filler metal for welding. Wire and rod
BS EN 4327
2001
Aerospace series. Heat resisting alloy CO-WH1401 (CoCr26Ni11W8). Filler metal for welding. Wire and rod
BS EN 4328
2002
Aerospace series. Steel FE-WM1601 (X18CrWNi13-3-2). Filler metal for welding. Wire and rod
BS EN 4329
2001
Aerospace series. Heat resisting alloy NI-WH0001 (NiCr20). Filler metal for welding. Wire and rod
BS EN 4330
2002
Aerospace series. Steel FE-WA4802 (X8CrNiMn27-22-2). Filler metal for welding. Wire and rod
BS EN 4331
2002
Aerospace series. Steel FE-WL1804 (25CrMnMo4-2-2). Filler metal for welding. Wire and rod
BS EN 4332
2002
Aerospace series. Steel FE-WL1805 (8CrMnMo12-4-9). Filler metal for welding. Wire and rod
BS EN 4333
2002
Aerospace series. Steel FE-WA4902 (X5CrNiCoMoWMn21-20-20-3-3-2). Filler metal for welding. Wire and rod
BS EN 4334
2002
Aerospace series. Steel FE-WL1806 (15CrMnMoV5-4-9-3). Filler metal for welding. Wire and rod
BS EN 4335
2002
Aerospace series. Steel FE-WA2602 (X4NiCrTiMoV26-15). Filler metal for welding. Wire and rod
BS EN 4336
2002
Aerospace series. Steel FE-WA3801 (X4CrNiMn20-10-2). Filler metal for welding. Wire and rod
BS EN 4337
2001
Aerospace series. Heat resisting alloy NI-WH8901 (NiCr16Ti3Mn2). Filler metal for welding. Wire and rod
BS EN 4338
2001
Aerospace series. Heat resisting alloy. NI-WH3902 (NiCr25Mo10C). Filler metal for welding. Wire and rod
BS EN 4339
2001
Aerospace series. Heat resisting alloy CO-WH4001 (CoCr29W9). Filler metal for welding. Wire and rod
BS EN 4340
2002
Aerospace series. Magnesium alloy MG-W68001. Filler metal for welding. Wire and rod
BS EN 4341
2001
Aerospace series. Aluminium alloy AL-W46431. Filler metal for welding. Wire and rod
BS EN 4342
2001
Aerospace series. Titanium TI-W99001. Filler metal for welding. Wire and rod
BS EN 4343
2002
Aerospace series. Steel FE-WM1001 (X13Cr12). Filler metal for welding. Wire and rod
BS EN 4344
2001
Aerospace series. Steel FE-WM1002 (X13Cr13). Filler metal for welding. Wire and rod
BS EN 4420
2003
Aerospace series. Clips, spring tension, in alloy steel FE-PA3903
BS EN 4549
2003
Aerospace series. Pipe coupling, in heat resisting steel or in heat resisting nickel alloy. Coupling end, welded. Design configuration. Inch series
BS EN 4550-1
2003
Aerospace series. Pipe coupling 37°. Design configuration. Inch series. Male sealing ends, spherical
BS EN 4550-2
2003
Aerospace series. Pipe coupling 37°. Design configuration. Inch series. Port ends
BS EN 4550-3
2003
Aerospace series. Pipe coupling 37°. Design configuration. Inch series. Port connections
BS EN 4550-4
2003
Aerospace series. Pipe coupling 37°. Design configuration. Inch series. Female sealing ends
BS EN 4551
2003
Aerospace series. Pipe coupling 37°, in heat resisting steel. Swivel nuts. Inch series
BS EN 4552
2003
Aerospace series. Pipe coupling 37°, spherical, in heat resisting steel. Straight nipples, welded end. Inch series
BS EN 4553
2003
Aerospace series. Pipe coupling 37°, spherical, in heat resisting steel. Elbow 90° nipples, welded end. Inch series
BS EN 4554
2003
Aerospace series. Pipe coupling 37°, spherical, in heat resisting steel. Straight unions, threaded. Inch series
BS EN 4555
2003
Aerospace series. Pipe coupling 37°, in heat resisting steel. Ferrules, welded end. Inch series
BS EN 4556
2003
Aerospace series. Pipe coupling 37°, in heat resisting steel. Cap assemblies. Inch series
BS EN 4557
2003
Aerospace series. Pipe coupling 37°, spherical, in heat resisting steel. Tees nipples, welded end. Inch series
BS EN 4560
2003
Aerospace series. Pipe coupling 37°, spherical, up to 21000 kPa. Inch series. Technical specification
BS EN 4561
2003
Aerospace series. Pipe coupling, welded, in heat resisting steel. Elbow 90°. Inch series
BS EN 4562
2003
Aerospace series. Pipe coupling, welded, in heat resisting steel. Reductors. Inch series
BS EN 4563
2003
Aerospace series. Pipe coupling, welded, in heat resisting steel. Tees. Inch series
BS EN 4585
2003
Aerospace series. Clips, spring tension. Technical specification
BS EN 4628-10
2003
Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance. Assessment of degree of filiform corrosion
BS EN 9100
2003
Aerospace series. Quality management systems. Requirements (based on ISO 9001:2000) and Quality systems. Model for quality assurance in design, development, production, installation and servicing (based on ISO 9001:1994)
BS EN 10001
1991
Definition and classification of pig-irons
BS EN 10002-1
2001
Tensile testing of metallic materials. Method of test at ambient temperature
BS EN 10002-3
1995
Tensile testing of metallic materials. Calibration of force proving instruments used for the verification of uniaxial testing machines
BS EN 10002-4
1995
Tensile testing of metallic materials. Verification of extensometers used in uniaxial testing
BS EN 10002-5
1992
Tensile testing of metallic materials. Method of test at elevated temperatures
BS EN 10016-1
1995
Non-alloy steel rods for drawing and/or cold rolling. General requirements
BS EN 10016-2
1995
Non-alloy steel rods for drawing and/or cold rolling. Specific requirements for general purpose rod
BS EN 10016-3
1995
Non-alloy steel rods for drawing and/or cold rolling. Specific requirements for rimmed and rimmed substitute low carbon steel rod
BS EN 10016-4
1995
Non-alloy steel rods for drawing and/or cold rolling. Specific requirements for rod for special applications
BS EN 10020
2000
Definition and classification of grades of steel
BS EN 10021
1993
General technical delivery requirements for steel and iron products
BS EN 10024
1995
Hot rolled taper flange I sections. Tolerances on shape and dimensions
BS EN 10025
1993
Hot rolled products of non-alloy structural steels. Technical delivery conditions
BS EN 10027-1
1992
Designation systems for steel. Steel names, principal symbols
BS EN 10027-2
1992
Designation systems for steels. Steel numbers
BS EN 10028-1
2000
Specification for flat products made of steels for pressure purposes. General requirements
BS EN 10028-2
2003
Specification for flat products made of steels for pressure purposes. Non-alloy and alloy steels with specified elevated temperature properties
BS EN 10028-3
2003
Specification for flat products made of steels for pressure purposes. Weldable fine grain steels, normalized
BS EN 10028-4
2003
Specification for flat products made of steels for pressure purposes. Nickel alloy steels with specified low temperature properties
BS EN 10028-5
2003
Specification for flat products made of steels for pressure purposes. Weldable fine grain steels, thermomechanically rolled
BS EN 10028-6
2003
Specification for flat products made of steels for pressure purposes. Weldable fine grain steels, quenched and tempered
BS EN 10028-7
2000
Specification for flat products made of steels for pressure purposes. Stainless steels
BS EN 10029
1991
Specification for tolerances on dimensions, shape and mass for hot rolled steel plates 3 mm thick or above
BS EN 10031
2003
Semi finished products for forging. Tolerances on dimensions shape and mass
BS EN 10034
1993
Structural steel I and H sections. Tolerances on shape and dimensions
BS EN 10036
1991
Chemical analysis of ferrous materials. Determination of total carbon in steels and irons. Gravimetric method after combustion in a stream of oxygen
BS EN 10045-1
1990
Charpy impact test on metallic materials. Test method (V- and U-notches)
BS EN 10045-2
1993
Charpy impact test on metallic materials. Method for the verification of impact testing machines
BS EN 10048
1997
Hot rolled narStandard steel strip. Tolerances on dimensions and shape
BS EN 10051
1992
Specification for continuously hot-rolled uncoated plate, sheet and strip of non-alloy and alloy steels. Tolerances on dimensions and shape
BS EN 10052
1994
Vocabulary of heat treatment terms for ferrous products
BS EN 10055
1996
Hot rolled steel equal flange tees with radiused root and toes. Dimensions and tolerances on shape and dimensions
BS EN 10056-1
1999
Specification for structural steel equal and unequal angles. Dimensions
BS EN 10056-2
1993
Specification for structural steel equal and unequal angles. Tolerances on shape and dimensions
BS EN 10058
2003
Hot rolled flat steel bars for general purposes. Dimensions and tolerances on shape and dimensions
BS EN 10059
2003
Hot rolled square steel bars for general purposes. Dimensions and tolerances on shape and dimensions
BS EN 10060
2003
Hot rolled round steel bars for general purposes. Dimensions and tolerances on shape and dimensions
BS EN 10061
2003
Hot rolled hexagon steel bars for general purposes. Dimensions and tolerances on shape and dimensions
BS EN 10067
1997
Hot rolled bulb flats. Dimensions and tolerances on shape, dimensions and mass
BS EN 10071
1991
Chemical analysis of ferrous materials. Determination of manganese in steels and irons. Electrometric titration method
BS EN 10079
1993
Definition of steel products
BS EN 10083-1
1991
Quenched and tempered steels. Technical delivery conditions for special steels
BS EN 10083-2
1991
Quenched and tempered steels. Technical delivery conditions for unalloyed quality steels
BS EN 10083-3
1996
Quenched and tempered steels. Technical delivery conditions for boron steels
BS EN 10084
1998
Case hardening steels. Technical delivery conditions
BS EN 10085
2001
Nitriding steel. Technical delivery conditions
BS EN 10087
1999
Free cutting steels. Technical delivery conditions for semi-finished products, hot rolled bars and rods
BS EN 10088-1
2005
Stainless steels. List of stainless steels
BS EN 10088-2
2005
Stainless steels. Technical delivery conditions for sheet/plate and strip for general purposes
BS EN 10088-3
2005
Stainless steels. Technical delivery conditions for semi-finished products, bars, rods and sections for general purposes
BS EN 10089
2002
Hot rolled steels for quenched and tempered springs. Technical delivery conditions
BS EN 10090
1998
Valve steels and alloys for internal combustion engines
BS EN 10092-1
2003
Hot rolled spring steel flat bars. Flat bars. Dimensions and tolerances on shape and dimensions
BS EN 10095
1999
Heat resisting steels and nickel alloys
BS EN 10106
1996
Cold rolled non-oriented electrical steel sheet and strip delivered in the fully processed state
BS EN 10107
1996
Grain-oriented electrical steel sheet and strip delivered in the fully processed state
BS EN 10111
1998
Continuously hot-rolled low carbon steel sheet and strip for cold forming. Technical delivery conditions
BS EN 10113-1
1993
Hot-rolled products in weldable fine grain structural steels. General delivery conditions
BS EN 10113-2
1993
Hot-rolled products in weldable fine grain structural steels. Delivery conditions for normalized/normalized rolled steels
BS EN 10113-3
1993
Hot-rolled products in weldable fine grain structural steels. Delivery conditions for thermomechanical rolled steels
BS EN 10126
1996
Cold rolled electrical non-alloyed steel sheet and strip delivered in the semi-processed state
BS EN 10130
1999
Cold-rolled low-carbon steel flat products for cold forming. Technical delivery conditions
BS EN 10131
1991
Cold-rolled uncoated low carbon and high yield strength steel flat products for cold forming. Tolerances on dimensions and shape
BS EN 10132-1
2000
Cold rolled narStandard steel strip for heat treatment. Technical delivery conditions. General
BS EN 10132-2
2000
Cold rolled narStandard steel strip for heat treatment. Technical delivery conditions. Case hardening steels
BS EN 10132-3
2000
Cold rolled narStandard steel strip for heat treatment. Technical delivery conditions. Steels for quenching and tempering
BS EN 10132-4
2000
Cold rolled narStandard steel strip for heat treatment. Technical delivery conditions. Spring steels and other applications
BS EN 10136
1991
Chemical analysis of ferrous materials. Determination of nickel in steels and irons. Flame atomic absorption spectrometric method
BS EN 10137-1
1996
Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions. General delivery conditions
BS EN 10137-2
1996
Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions. Delivery conditions for quenched and tempered steels
BS EN 10137-3
1996
Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions. Delivery conditions for precipitation hardened steels
BS EN 10140
1997
Cold rolled narStandard steel strip. Tolerances on dimensions and shape
BS EN 10142
2000
Continuously hot-dip zinc coated low carbon steels strip and sheet for cold forming. Technical delivery conditions
BS EN 10143
1993
Continuously hot-dip metal coated steel sheet and strip. Tolerances on dimensions and shape
BS EN 10147
2000
Continuously hot-dip zinc coated structural steels strip and sheet. Technical delivery conditions
BS EN 10149-1
1996
Specification for hot-rolled flat products made of high yield strength steels for cold forming. General delivery conditions
BS EN 10149-2
1996
Specification for hot-rolled flat products made of high yield strength steels for cold forming. Delivery conditions for thermomechanically rolled steels
BS EN 10149-3
1996
Specification for hot-rolled flat products made of high yield strength steels for cold forming. Delivery conditions for normalized or normalized rolled steels
BS EN 10151
2002
Stainless steel strip for springs. Technical delivery conditions
BS EN 10152
2003
Electrolytically zinc coated cold rolled steel flat products. Technical delivery conditions
BS EN 10154
2002
Continuously hot-dip aluminium-silicon (AS) coated steel strip and sheet. Technical delivery conditions
BS EN 10155
1993
Structural steels with improved atmospheric corrosion resistance. Technical delivery conditions
BS EN 10160
1999
Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method)
BS EN 10162
2003
Cold rolled steel sections. Technical delivery conditions. Dimensional and cross-sectional tolerances
BS EN 10163-1
2004
Specification for delivery requirements for surface condition of hot rolled steel plates, wide flats and sections. General requirements
BS EN 10163-2
2004
Specification for delivery requirements for surface condition of hot rolled steel plates, wide flats and sections. Plates and wide flats
BS EN 10163-3
2004
Specification for delivery requirements for surface condition of hot rolled steel plates, wide flats and sections. Sections
BS EN 10164
2004
Steel products with improved deformation properties perpendicular to the surface of the product. Technical delivery conditions
BS EN 10165
1996
Cold rolled electrical alloyed steel sheet and strip delivered in the semi-processed state
BS EN 10169-1
2003
Continuously organic coated (coil coated) steel flat products. General information (definitions, materials, tolerances, test methods)
BS EN 10169-3
2003
Continuously organic coated (coil coated) steel flat products. Products for building interior applications
BS EN 10184
1992
Specification for chemical analysis of ferrous materials. Determination of phosphorus in steels and irons. Spectrophotometric method
BS EN 10200
1992
Chemical analysis of ferrous materials. Determination of boron in steel. Spectrophotometric method
BS EN 10202
2001
Cold reduced tinmill products. Electrolytic tinplate and electrolytic chromium/chromium oxide coated steel
BS EN 10203
1991
Specification for cold reduced electrolytic tinplate
BS EN 10205
1992
Specification for cold reduced blackplate in coil form for the production of tinplate or electrolytic chromium/chromium oxide coated steel
BS EN 10207
2005
Steels for simple pressure vessels. Technical delivery requirements for plates, strips and bars
BS EN 10208-1
1998
Steel pipes for pipelines for combustible fluids. Technical delivery conditions. Pipes of requirement class A
BS EN 10208-2
1997
Steel pipes for pipelines for combustible fluids. Technical delivery conditions. Pipes of requirement class B
BS EN 10209
1996
Cold rolled low carbon steel flat products for vitreous enamelling. Technical delivery conditions
BS EN 10210-1
1994
Hot finished structural hollow sections of non-alloy and fine grain structural steels. Technical delivery requirements
BS EN 10210-2
1997
Hot finished structural hollow sections of non-alloy and fine grain structural steels. Tolerances, dimensions and sectional properties
BS EN 10211
1996
Chemical analysis of ferrous materials. Determination of titanium in steel and iron. Flame atomic absorption spectrometric method
BS EN 10212
1996
Chemical analysis of ferrous materials. Determination of arsenic in steel and iron. Spectrophotometric method
BS EN 10213-1
1996
Technical delivery conditions for steel castings for pressure purposes. General
BS EN 10213-2
1996
Technical delivery conditions for steel castings for pressure purposes. Steel grades for use at room temperature and at elevated temperature
BS EN 10213-3
1996
Technical delivery conditions for steel castings for pressure purposes. Steels for use at low temperatures
BS EN 10213-4
1996
Technical delivery conditions for steel castings for pressure purposes. Austenitic and austenitic-ferritic steel grades
BS EN 10214
1995
Continuously hot-dip zinc-aluminium (ZA) coated steel strip and sheet. Technical delivery conditions
BS EN 10215
1995
Continuously hot-dip aluminium-zinc (AZ) coated steel strip and sheet. Technical delivery conditions
BS EN 10216-1
2002
Seamless steel tubes for pressure purposes. Technical delivery conditions. Non-alloy steel tubes with specified room temperature properties
BS EN 10216-2
2002
Seamless steel tubes for pressure purposes. Technical delivery conditions. Non-alloy and alloy steel tubes with specified elevated temperature properties
BS EN 10216-3
2002
Seamless steel tubes for pressure purposes. Technical delivery conditions. Alloy fine grain steel tubes
BS EN 10216-4
2002
Seamless steel tubes for pressure purposes. Technical delivery conditions. Non-alloy and alloy steel tubes with specified low temperature properties
BS EN 10217-3
2002
Welded steel tubes for pressure purposes. Technical delivery conditions. Alloy fine grain steel tubes
BS EN 10217-4
2002
Welded steel tubes for pressure purposes. Technical delivery conditions. Electric welded non-alloy steel tubes with specified low temperature properties
BS EN 10217-5
2002
Welded steel tubes for pressure purposes. Technical delivery conditions. Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties
BS EN 10217-6
2002
Welded steel tubes for pressure purposes. Technical delivery conditions. Submerged arc welded non-alloy steel tubes with specified low temperature properties
BS EN 10217-1
2002
Welded steel tubes for pressure purposes. Technical delivery conditions. Non-alloy steel tubes with specified room temperature properties
BS EN 10217-2
2002
Welded steel tubes for pressure purposes. Technical delivery conditions. Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties
BS EN 10218-1
1994
Steel wire and wire products. General. Test methods
BS EN 10218-2
1997
Steel wire and wire products. General. Wire dimensions and tolerances
BS EN 10219-1
1997
Cold formed welded structural sections of non-alloy and fine grain steels. Technical delivery requirements
BS EN 10219-2
1997
Cold formed welded structural sections of non-alloy and fine grain steels. Tolerances, dimensions and sectional properties
BS EN 10220
2002
Seamless and welded steel tubes. Dimensions and masses per unit length
BS EN 10221
1996
Specification for surface quality classes for hot-rolled bars and rods. Technical delivery conditions
BS EN 10222-1
1998
Steel forgings for pressure purposes. General requirements for open die forgings
BS EN 10222-2
2000
Steel forgings for pressure purposes. Ferritic and martensitic steels with specified elevated temperature properties
BS EN 10222-3
1999
Steel forgings for pressure purposes. Nickel steels with specified low-temperature properties
BS EN 10222-4
1999
Steel forgings for pressure purposes. Weldable fine-grain steels with high proof strength
BS EN 10222-5
2000
Steel forgings for pressure purposes. Martensitic, austenitic and austenitic-ferritic stainless steels
BS EN 10223-1
1998
Steel wire and wire products for fences. Zinc and zinc alloy coated steel barbed wire
BS EN 10223-2
1998
Steel wire and wire products for fences. Hexagonal steel wire netting for agricultural, insulation and fencing purposes
BS EN 10223-3
1998
Steel wire and wire products for fences. Hexagonal steel wire netting for engineering purposes
BS EN 10223-4
1998
Steel wire and wire products for fences. Steel wire welded mesh fencing
BS EN 10223-5
1998
Steel wire and wire products for fences. Steel wire woven hinged joint and knotted mesh fencing
BS EN 10223-6
1998
Steel wire and wire products for fences. Steel wire chain link fencing
BS EN 10223-7
2002
Steel wire and wire products for fences. Steel wire welded panels. For fencing
BS EN 10224
2002
Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption. Technical delivery conditions
BS EN 10225
2001
Weldable structural steels for fixed offshore structures. Technical delivery conditions
BS EN 10228-1
1999
Non-destructive testing of steel forgings. Magnetic particle inspection
BS EN 10228-2
1998
Non-destructive testing of steel forgings. Penetrant testing
BS EN 10228-3
1998
Non-destructive testing of steel forgings. Ultrasonic testing of ferritic or martensitic steel forgings
BS EN 10228-4
1999
Non-destructive testing of steel forgings. Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings
BS EN 10229
1998
Evaluation of resistance of steel products to hydrogen induced cracking (HIC)
BS EN 10230-1
2000
Steel wire nails. Loose nails for general applications
BS EN 10232
1994
Metallic materials. Tube (in full section). Bend test
BS EN 10233
1994
Metallic materials. Tube. Flattening test
BS EN 10234
1994
Metallic materials. Tube. Drift expanding test
BS EN 10235
1994
Metallic materials. Tube. Flanging test
BS EN 10236
1994
Metallic materials. Tube. Ring expanding test
BS EN 10237
1994
Metallic materials. Tube. Ring tensile test
BS EN 10238
1997
Automatically blast cleaned and automatically primed structural steel products
BS EN 10240
1998
Internal and/or external protective coatings for steel tubes. Specification for hot dip galvanized coatings applied in automatic plants
BS EN 10241
2000
Steel threaded pipe fittings
BS EN 10242
1995
Threaded pipe fittings in malleable cast iron
BS EN 10243-1
1999
Steel die forgings. Tolerances on dimensions. Drop and vertical press forgings
BS EN 10243-2
1999
Steel die forgings. Tolerances on dimensions. Upset forgings made on horizontal forging machines
BS EN 10244-1
2001
Steel wire and wire products. Non-ferrous metallic coatings on steel wire. General principles
BS EN 10244-2
2001
Steel wire and wire products. Non-ferrous metallic coatings on steel wire. Zinc or zinc alloy coatings
BS EN 10244-3
2001
Steel wire and wire products. Non-ferrous metallic coatings on steel wire. Aluminium coatings
BS EN 10244-4
2001
Steel wire and wire products. Non-ferrous metallic coatings on steel wire. Tin coatings
BS EN 10244-5
2001
Steel wire and wire products. Non-ferrous metallic coatings on steel wire. Nickel coatings
BS EN 10244-6
2001
Steel wire and wire products. Non-ferrous metallic coatings on steel wire. Copper, bronze or brass coatings
BS EN 10245-1
2001
Steel wire and wire products. Organic coatings on steel wire. General rules
BS EN 10245-2
2001
Steel wire and wire products. Organic coatings on steel wire. PVC finished wire
BS EN 10245-3
2001
Steel wire and wire products. Organic coatings on steel wire. PE coated wire
BS EN 10245-4
2003
Steel wire and wire products. Organic coatings on steel wire. Polyester coated wire
BS EN 10246-1
1996
Non-destructive testing of steel tubes. Automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness
BS EN 10246-2
2000
Non-destructive testing of steel tubes. Automatic eddy current testing of seamless and welded (except submerged arc welded) austenitic and austenitic-ferritic steel tubes for verification of hydraulic leak-tightness
BS EN 10246-3
2000
Non-destructive testing of steel tubes. Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections
BS EN 10246-4
2000
Non-destructive testing of steel tubes. Automatic full peripheral magnetic transducer/flux leakage testing of seamless ferromagnetic steel tubes for the detection of transverse imperfections
BS EN 10246-5
2000
Non-destructive testing of steel tubes. Automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal imperfections
BS EN 10246-6
2000
Non-destructive testing of steel tubes. Automatic full peripheral ultrasonic testing of seamless steel tubes for the detection of transverse imperfections
BS EN 10246-7
2005
Non-destructive testing of steel tubes. Automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) steel tubes for the detection of longitudinal imperfections
BS EN 10246-8
2000
Non-destructive testing of steel tubes. Automatic ultrasonic testing of the weld seam of electric welded steel tubes for the detection of longitudinal imperfections
BS EN 10246-9
2000
Non-destructive testing of steel tubes. Automatic ultrasonic testing of the weld seam of submerged arc welded steel tubes for the detection of longitudinal and/or transverse imperfections
BS EN 10246-10
2000
Non-destructive testing of steel tubes. Radiographic testing of the weld seam of automatic fusion arc welded steel tubes for the detection of imperfections
BS EN 10246-11
2000
Non-destructive testing of steel tubes. Liquid penetrant testing of seamless and welded steel tubes for the detection of surface imperfections
BS EN 10246-12
2000
Non-destructive testing of steel tubes. Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections
BS EN 10246-13
2000
Non-destructive testing of steel tubes. Automatic full peripheral ultrasonic thickness testing for seamless and welded (except submerged arc welded) steel tubes
BS EN 10246-14
2000
Non-destructive testing of steel tubes. Automatic ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of laminar imperfections
BS EN 10246-15
2000
Non-destructive testing of steel tubes. Automatic ultrasonic testing of strip/plate used in the manufacture of welded steel tubes for the detection of laminar imperfections
BS EN 10246-16
2000
Non-destructive testing of steel tubes. Automatic ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for the detection of laminar imperfections
BS EN 10246-17
2000
Non-destructive testing of steel tubes. Ultrasonic testing of tube ends of seamless and welded steel tubes for the detection of laminar imperfections
BS EN 10246-18
2000
Non-destructive testing of steel tubes. Magnetic particle inspection of tube ends of seamless and welded ferromagnetic steel tubes for the detection of laminar imperfections
BS EN 10248-1
1996
Hot rolled sheet piling of non alloy steels. Technical delivery conditions
BS EN 10248-2
1996
Hot rolled sheet piling of non alloy steels. Tolerances on shape and dimensions
BS EN 10249-1
1996
Cold formed sheet piling of non alloy steels. Technical delivery conditions
BS EN 10249-2
1996
Cold formed sheet piling of non alloy steels. Tolerances on shape and dimensions
BS EN 10250-1
1999
Open steel die forgings for general engineering purposes. General requirements
BS EN 10250-2
2000
Open steel die forgings for general engineering purposes. Non-alloy quality and special steels
BS EN 10250-3
2000
Open steel die forgings for general engineering purposes. Alloy special steels
BS EN 10250-4
2000
Open steel die forgings for general engineering purposes. Stainless steels
BS EN 10251
1997
Magnetic materials. Methods of determination of the geometrical characteristics of electrical steel sheet and strip
BS EN 10252
1997
Magnetic materials. Methods of measurement of magnetic properties of magnetic steel sheet and strip at medium frequencies
BS EN 10253-1
1999
Butt-welding pipe fittings. Wrought carbon steel for general use and without specific inspection requirements
BS EN 10254
1999
Steel closed die forgings. General technical delivery conditions
BS EN 10256
2000
Non-destructive testing on steel tubes. Qualification and competence of level 1 and level 2 non-destructive testing personnel
BS EN 10257-1
1998
Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables. Land cables
BS EN 10257-2
1998
Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables. Submarine cables
BS EN 10258
1997
Cold-rolled stainless steel narStandard strip and cut lengths. Tolerances on dimensions and shape
BS EN 10259
1997
Cold-rolled stainless and heat resisting steel wide strip and plate/sheet. Tolerances on dimensions and shape
BS EN 10263-5
2001
Steel rod, bars and wire for cold heading and cold extrusion. Technical delivery conditions for stainless steels
BS EN 10263-1
2001
Steel rod, bars and wire for cold heading and cold extrusion. General technical delivery conditions
BS EN 10263-2
2001
Steel rod, bars and wire for cold heading and cold extrusion. Technical delivery conditions for steels not intended for heat treatment after cold working
BS EN 10263-3
2001
Steel rod, bars and wire for cold heading and cold extrusion. Technical delivery conditions for case hardening steels
BS EN 10263-4
2001
Steel rod, bars and wire for cold heading and cold extrusion. Technical delivery conditions for steels for quenching and tempering
BS EN 10264-1
2002
Steel wire and wire products. Steel wire for ropes. General requirements
BS EN 10264-2
2002
Steel wire and wire products. Steel wire for ropes. Cold drawn non alloy steel wire for ropes for general applications
BS EN 10264-3
2002
Steel wire and wire products. Steel wire for ropes. Round and shaped non alloyed steel wire for high duty applications
BS EN 10264-4
2002
Steel wire and wire products. Steel wire for ropes. Stainless steel wire
BS EN 10265
1996
Magnetic materials. Specification for steel sheet and strip with specified mechanical properties and magnetic permeability
BS EN 10266
2003
Steel tubes, fittings and structural hollow sections. Symbols and definitions of terms for use in product standards
BS EN 10267
1998
Ferritic-pearlitic steels for precipitation hardening from hot-working temperatures
BS EN 10268
1999
Cold-rolled flat products made of high yield strength micro-alloyed steels for cold forming. General delivery conditions
BS EN 10269
1999
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
BS EN 10270-1
2001
Steel wire for mechanical springs. Patented cold drawn unalloyed spring steel wire
BS EN 10270-2
2001
Steel wire for mechanical springs. Oil hardened and tempered spring steel wire
BS EN 10270-3
2001
Steel wire for mechanical springs. Stainless spring steel wire
BS EN 10271
1999
Electrolytically zinc-nickel (ZN) coated steel flat products. Technical delivery conditions
BS EN 10272
2000
Stainless steel bars for pressure purposes
BS EN 10273
2000
Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
BS EN 10274
1999
Metallic materials. Drop weight tear test
BS EN 10275
1999
Metallic materials. Tube ring hydraulic pressure test
BS EN 10276-2
2003
Chemical analysis of ferrous materials. Determination of oxygen in steel and iron. Infrared method after fusion under inert gas
BS EN 10277-1
1999
Bright steel products. Technical delivery conditions. General
BS EN 10277-2
1999
Bright steel products. Technical delivery conditions. Steels for general engineering purposes
BS EN 10277-3
1999
Bright steel products. Technical delivery conditions. Free cutting steels
BS EN 10277-4
1999
Bright steel products. Technical delivery conditions. Case-hardening steels
BS EN 10277-5
1999
Bright steel products. Technical delivery conditions. Steels for quenching and tempering
BS EN 10278
1999
Dimensions and tolerances of bright steel products
BS EN 10279
2000
Hot rolled steel channels. Tolerances on shape, dimension and mass
BS EN 10280
2001
Magnetic materials. Methods of measurement of the magnetic properties of electrical sheet and strip by means of a single sheet tester
BS EN 10282
2001
Magnetic materials. Method of test for the determination of surface insulation resistance of electrical sheet and strip
BS EN 10283
1999
Corrosion resistant steel castings
BS EN 10284
2000
Malleable cast iron fittings with compression ends for polyethylene (PE) piping systems
BS EN 10288
2002
Steel tubes and fittings for onshore and offshore pipelines. External two layer extruded polyethylene based coatings
BS EN 10289
2002
Steel tubes and fittings for onshore and offshore pipelines. External liquid applied epoxy and epoxy-modified coatings
BS EN 10290
2002
Steel tubes and fittings for onshore and offshore pipelines. External liquid applied polyurethane and polyurethane-modified coatings
BS EN 10291
2000
Metallic materials. Uniaxial creep testing in tension. Methods of test
BS EN 10292
2000
Continuously hot-dip coated strip and sheet of steels with higher yield strength for cold forming. Technical delivery conditions
BS EN 10295
2002
Heat resistant steel castings
BS EN 10296-1
2003
Welded circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions. Non-alloy and alloy steel tubes
BS EN 10297-1
2003
Seamless circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions. Non-alloy and alloy steel tubes
BS EN 10301
2003
Steel tubes and fittings for on and offshore pipelines. Internal coating for the reduction of friction for conveyance of non corrosive gas
BS EN 10302
2002
Creep resisting steels, nickel and cobalt alloys
BS EN 10303
2001
Thin magnetic steel sheet and strip for use at medium frequencies
BS EN 10305-1
2002
Steel tubes for precision applications. Technical delivery conditions. Seamless cold drawn tubes
BS EN 10305-2
2002
Steel tubes for precision applications. Technical delivery conditions. Welded cold drawn tubes
BS EN 10305-3
2002
Steel tubes for precision applications. Technical delivery conditions. Welded cold sized tubes
BS EN 10305-4
2003
Steel tubes for precision applications. Technical delivery conditions. Seamless cold drawn tubes for hydraulic and pneumatic power systems
BS EN 10305-5
2003
Steel tubes for precision applications. Technical delivery conditions. Welded and cold sized square and rectangular tubes
BS EN 10306
2002
Iron and steel. Ultrasonic testing of H beams with parallel flanges and IPE beams
BS EN 10307
2001
Non-destructive testing. Ultrasonic testing of austenitic and austentitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method)
BS EN 10308
2002
Non-destructive testing. Ultrasonic testing of steel bars
BS EN 10310
2003
Steel tubes and fittings for onshore and offshore pipelines. Internal and external polyamide powder based coatings
BS EN 10312
2002
Welded stainless steel tubes for the conveyance of aqueous liquids including water for human consumption. Technical delivery conditions
BS EN 10314
2002
Method for the derivation of minimum values of proof strength of steel at elevated temperatures
BS EN 10319-1
2003
Metallic materials. Tensile stress relaxation testing. Procedure for testing machines
BS EN 10330
2003
Magnetic materials. Method of measurement of the coercivity of magnetic materials in an open circuit
BS EN 10331
2003
Magnetic materials. Specification for sintered soft magnetic materials
BS EN 10332
2003
Magnetic materials. Permanent magnet (magnetically hard) materials. Methods of measurement of magnetic properties
BS EN 12001
2003
Conveying, spraying and placing machines for concrete and mortar. Safety requirements
BS EN 12002
2002
Adhesives for tiles. Determination of transverse deformation for cementitious adhesives and grouts
BS EN 12003
1998
Adhesives for tiles. Determination of shear adhesion strength of reaction resin adhesives
BS EN 12004
2001
Adhesives for tiles. Definitions and specifications
BS EN 12006-1
1999
Non-active surgical implants. Particular requirements for cardiac and vascular implants. Heart valve substitutes
BS EN 12006-2
1998
Non-active surgical implants. Particular requirements for cardiac and vascular implants. Vascular prostheses including cardiac valve conduits
BS EN 12006-3
1999
Non-active surgical implants. Particular requirements for cardiac and vascular implants. Endovascular devices
BS EN 12007-1
2000
Gas supply systems. Pipelines for maximum operating pressure up to and including 16 bar. General functional recommendations
BS EN 12007-2
2000
Gas supply systems. Pipelines for maximum operating pressure up to and including 16 bar. Specific functional recommendations for polyethylene (MOP up to and including 10 bar)
BS EN 12007-3
2000
Gas supply systems. Pipelines for maximum operating pressure up to and including 16 bar. Specific functional recommendations for steel
BS EN 12007-4
2000
Gas supply systems. Pipelines for maximum operating pressure up to and including 16 bar. Specific functional recommendations for renovation
BS EN 12010
1998
Non-active surgical implants. Joint replacement implants. Particular requirements
BS EN 12011
1998
Instrumentation to be used in association with non-active surgical implants. General requirements
BS EN 12012-1
2000
Rubber and plastics machines. Size reduction machines. Safety requirements for blade granulators
BS EN 12012-2
2001
Rubber and plastics machines. Size reduction machines. Safety requirements for strand pelletisers
BS EN 12012-3
2001
Rubber and plastics machines. Size reduction machines. Safety requirements for shredders
BS EN 12013
2000
Rubber and plastics machines. Internal mixers. Safety requirements
BS EN 12014-1
1997
Foodstuffs. Determination of nitrate and/or nitrite content. General considerations
BS EN 12014-2
1997
Foodstuffs. Determination of nitrate and/or nitrite content. HPLC/IC method for the determination of nitrate content of vegetables and vegetable products
BS EN 12014-5
1997
Foodstuffs. Determination of nitrate and/or nitrite content. Enzymatic determination of nitrate content of vegetable-containing food for babies and infants
BS EN 12014-7
1998
Foodstuffs. Determination of nitrate and/or nitrite content. Continuous flow method for the determination of nitrate content of vegetables and vegetable products after cadmium reduction
BS EN 12015
2004
Electromagnetic compatibility. Product family standard for lifts, escalators and passenger conveyors. Emission
BS EN 12016
2004
Electromagnetic compatibility. Product family standard for lifts, escalators and passenger conveyors. Immunity
BS EN 12019
1998
Zinc and zinc alloys. Optical emission spectrometric analysis
BS EN 12020-1
2001
Aluminium and aluminium alloys. Extruded precision profiles in alloys EN AW-6060 and EN AW-6063. Technical conditions for inspection and delivery
BS EN 12020-2
2001
Aluminium and aluminium alloys. Extruded precision profiles in alloys EN AW-6060 and EN AW-6063. Tolerances on dimensions and form
BS EN 12021
1999
Respiratory protective devices. Compressed air for breathing apparatus
BS EN 12022
1999
Blood-gas exchangers
BS EN 12023
1997
Self adhesive tapes. Measurement of water vapour transmission in a warm humid atmosphere
BS EN 12024
1997
Self adhesive tapes. Measurement of resistance to elevated temperature and humidity
BS EN 12025
1997
Self adhesive tapes. Measurement of tear resistance by the pendulum method
BS EN 12026
1997
Self adhesive tapes. Measurement of the unwinding force at high speed
BS EN 12027
1997
Self adhesive tapes. Measurement of flame resistance
BS EN 12028
1997
Self adhesive tapes. Measurement of elongation under static load
BS EN 12029
1997
Self adhesive tapes. Determination of the water-soluble corrosive ions
BS EN 12030
1997
Self adhesive tapes. Measurement of impact resistance
BS EN 12031
1997
Self-adhesive tapes. Measurement of bursting strength
BS EN 12032
1997
Self-adhesive tapes. Measurement of bonding of thermosetting adhesive tapes during curing
BS EN 12033
1997
Self-adhesive tapes. Measurement of bonding of thermosetting adhesive tapes after curing
BS EN 12034
1997
Self-adhesive tapes. Measurement of the length of a roll of adhesive tape
BS EN 12035
1997
Self-adhesive tapes. Flagging of adhesive tape
BS EN 12036
1997
Self-adhesive tapes. Solvent penetration into adhesive masking tapes
BS EN 12039
2000
Flexible sheets for waterproofing. Bitumen sheets for roof waterproofing. Determination of adhesion of granules
BS EN 12041
2000
Food processing machinery. Moulders. Safety and hygiene requirements
BS EN 12043
2000
Food processing machinery. Intermediate provers. Safety and hygiene requirements
BS EN 12045
2000
Shutters and blinds power operated. Safety in use. Measurement of the transmitted force
BS EN 12046-1
2003
Operating forces. Test method. Windows
BS EN 12046-2
2000
Operating forces. Test method. Doors
BS EN 12047
1997
Solid fertilizers. Measurement of static angle of repose
BS EN 12048
1997
Solid fertilizers and liming materials. Determination of moisture content. Gravimetric method by drying at (105 ± 2) °C
BS EN 12049
1987
Solid fertilizers and liming materials. Determination of moisture content. Gravimetric method by drying under reduced pressure
BS EN 12050-1
2001
Wastewater lifting plants for buildings and sites. Principles of construction and testing. Lifting plants for wastewater containing faecal matter
BS EN 12050-2
2001
Wastewater lifting plants for buildings and sites. Principles of construction and testing. Lifting plants for faecal-free wastewater
BS EN 12050-3
2001
Wastewater lifting plants for buildings and sites. Principles of construction and testing. Lifting plants for wastewater containing faecal matter for limited applications
BS EN 12050-4
2001
Wastewater lifting plants for buildings and sites. Principles of construction and testing. Non-return valves for faecal-free wastewater and wastewater containing faecal matter
BS EN 12051
2000
Building hardware. Door and window bolts. Requirements and test methods
BS EN 12053
2001
Safety of industrial trucks. Test methods for measuring noise emissions
BS EN 12053
2001
Safety of industrial trucks. Test methods for measuring noise emissions
BS EN 12055
1998
Liquid chilling packages and heat pumps with electrically driven compressors. Cooling mode. Definitions, testing and requirements
BS EN 12056-4
2000
Gravity drainage systems inside buildings. Wastewater lifting plants. Layout and calculation
BS EN 12056-5
2000
Gravity drainage systems inside buildings. Installation and testing, instructions for operation, maintenance and use
BS EN 12056-1
2000
Gravity drainage systems inside buildings. General and performance requirements
BS EN 12056-2
2000
Gravity drainage systems inside buildings. Sanitary pipework, layout and calculation
BS EN 12056-3
2000
Gravity drainage systems inside buildings. Roof drainage, layout and calculation
BS EN 12060
1998
Zinc and zinc alloys. Method of sampling. Specifications
BS EN 12062
1998
Non-destructive examination of welds. General rules for metallic materials
BS EN 12063
1999
Execution of special geotechnical work. Sheet pile walls
BS EN 12065
1998
Installations and equipment for liquefied natural gas. Testing of foam concentrates designed for generation of medium and high expansion foam and of extinguishing powders used on liquefied natural gas fires
BS EN 12066
1998
Installations and equipment for liquefied natural gas. Testing of insulating linings for liquefied natural gas impounding areas
BS EN 12067-1
1999
Gas/air ratio controls for gas burners and gas burning appliances. Pneumatic types
BS EN 12068
1999
Cathodic protection. External organic coatings for the corrosion protection of buried or immersed steel pipelines used in conjunction with cathodic protection. Tapes and shrinkable materials
BS EN 12072
2000
Welding consumables. Wire electrodes, wires and rods for arc welding of stainless and heat-resisting steels. Classification
BS EN 12073
2000
Welding consumables. Tubular cored electrodes for metal arc welding with or without a gas shield of stainless and heat-resisting steels. Classification
BS EN 12074
2000
Welding consumables. Quality requirements for manufacture, supply and distribution of consumables for welding and allied processes
BS EN 12075
1997
Biotechnology. Large scale process and production. Procedures for fermentation and downstream processes
BS EN 12077-2
1999
Cranes safety. Requirements for health and safety. Limiting and indicating devices
BS EN 12078
1998
Zero governors for gas burners and gas burning appliances
BS EN 12079
1999
Offshore containers. Design, construction, testing, inspection and marking
BS EN 12080
1998
Railway applications. Axleboxes. Rolling bearings
BS EN 12081
1998
Railway applications. Axleboxes. Lubricating greases
BS EN 12082
1998
Railway applications. Axleboxes. Performance testing
BS EN 12083
1998
Respiratory protective devices. Filters with breathing hoses, (non-mask mounted filters). Particle filters, gas filters, and combined filters. Requirements, testing, marking
BS EN 12085
1997
Thermal insulating products for building applications. Determination of linear dimensions of test specimens
BS EN 12086
1997
Thermal insulating products for building applications. Determination of water vapour transmission properties
BS EN 12087
1997
Thermal insulating products for building applications. Determination of long term water absorption by immersion
BS EN 12088
1997
Thermal insulating products for building applications. Determination of long term water absorption by diffusion
BS EN 12090
1997
Thermal insulating products for building applications. Determination of shear behaviour
BS EN 12091
1997
Thermal insulating products for building applications. Determination of freeze-thaw resistance
BS EN 12092
2001
Adhesives. Determination of viscosity
BS EN 12094-1
2003
Fixed firefighting systems. Components for gas extinguishing systems. Requirements and test methods for electrical automatic control and delay devices
BS EN 12094-2
2003
Fixed firefighting systems. Components for gas extinguishing systems. Requirements and test methods for non-electrical automatic control and delay devices
BS EN 12094-3
2003
Fixed firefighting systems. Components for gas extinguishing systems. Requirements and test methods for manual triggering and stop devices
BS EN 12094-5
2001
Fixed firefighting systems. Components for gas extinguishing systems. Requirements and test methods for high and low pressure selector valves and their actuators for CO2 systems
BS EN 12094-6
2001
Fixed firefighting systems. Components for gas extinguishing systems. Requirements and test methods for non-electrical disable devices for CO2 systems
BS EN 12094-7
2001
Fixed firefighting systems. Components for gas extinguishing systems. Requirements and test methods for nozzles for CO2 systems
BS EN 12094-8
1998
Fixed firefighting systems. Components for gas extinguishing systems. Requirements and test methods for flexible connectors for CO2 systems
BS EN 12094-9
2003
Fixed firefighting systems. Components for gas extinguishing systems. Requirements and test methods for special fire detectors
BS EN 12094-10
2003
Fixed firefighting systems. Components for gas extinguishing systems. Requirements and test methods for pressure gauges and pressure switches
BS EN 12094-11
2003
Fixed firefighting systems. Components for gas extinguishing systems. Requirements and test methods for mechanical weighing devices
BS EN 12094-12
2003
Fixed firefighting systems. Components for gas extinguishing systems. Requirements and test methods for pneumatic alarm devices
BS EN 12094-13
2001
Fixed firefighting systems. Components for gas extinguishing systems. Requirements and test methods for check valves and non-return valves
BS EN 12094-16
2003
Fixed firefighting systems. Components for gas extinguishing systems. Requirements and test methods for odorizing devices for CO2 low pressure systems
BS EN 12095
1997
Plastics piping systems. Brackets for rainwater piping systems. Test method for bracket strength
BS EN 12096
1997
Mechanical vibration. Declaration and verification of vibration emission values
BS EN 12098-1
1997
Controls for heating systems. Outside temperature compensated control equipment for hot water heating systems
BS EN 12098-2
2001
Controls for heating systems. Optimum start-stop control equipment for hot water heating systems
BS EN 12099
1997
Plastics piping systems. Polyethylene piping materials and components. Determination of volatile content
BS EN 12100
1998
Plastics piping systems. Polyethylene (PE) valves. Test method for resistance to bending between supports
BS EN 12101-2
2003
Smoke and heat control systems. Specification for natural smoke and heat exhaust ventilators
BS EN 12101-3
2002
Smoke and heat control systems. Specification for powered smoke and heat exhaust ventilators
BS EN 12103
1999
Resilient floor coverings. Agglomerated cork underlays. Specification
BS EN 12104
2000
Resilient floor coverings. Cork floor tiles. Specification
BS EN 12106
1998
Plastics piping systems. Polyethylene (PE) pipes. Test method for the resistance to internal pressure after application of squeeze-off
BS EN 12107
1998
Plastics piping systems. Injection-moulded thermoplastics fittings, valves and ancillary equipment. Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components
BS EN 12109
1999
Vacuum drainage systems inside buildings
BS EN 12110
2002
Tunnelling machines. Air locks. Safety requirements
BS EN 12111
2002
Tunnelling machines. Road headers, continuous miners and impact rippers. Safety requirements
BS EN 12114
2000
Thermal performance of buildings. Air permeability of building components and building elements. Laboratory test methods
BS EN 12115
2000
Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals. Specification
BS EN 12117
1998
Plastics piping systems. Fittings, valves and ancillaries. Determination of gaseous flow rate/pressure drop relationships
BS EN 12118
1998
Plastics piping systems. Determination of moisture content in thermoplastics by coulometry
BS EN 12119
1997
Plastics piping systems. Polyethylene (PE) valves. Test method for resistance to thermal cycling
BS EN 12120
1999
Chemicals used for treatment of water intended for human consumption. Sodium hydrogen sulfite
BS EN 12121
1999
Chemicals used for treatment of water intended for human consumption. Sodium disulfite
BS EN 12122
1999
Chemicals used for treatment of water intended for human consumption. Ammonia solution
BS EN 12123
2005
Chemicals used for treatment of water intended for human consumption. Ammonium sulfate
BS EN 12124
1999
Chemicals used for treatment of water intended for human consumption. Sodium sulfite
BS EN 12125
1999
Chemicals used for treatment of water intended for human consumption. Sodium thiosulfate
BS EN 12126
1999
Chemicals used for treatment of water intended for human consumption. Liquefied ammonia
BS EN 12127
1998
Textiles. Fabrics. Determination of mass per unit area using small samples
BS EN 12128
1998
Biotechnology. Laboratories for research, development and analysis. Containment levels of microbiology laboratories, areas of risk, localities and physical safety requirements
BS EN 12130
1998
Feather and down. Test methods. Determination of the filling power (massic volume)
BS EN 12131
1998
Feather and down. Test methods. Determination of the quantitive composition of feather and down (manual method)
BS EN 12132-1
1999
Feather and down. Methods of testing the down-proof properties of fabrics. Rubbing test
BS EN 12132-2
1999
Feather and down. Methods of testing the down-proof properties of fabrics. Impact test
BS EN 12133
1998
Fruit and vegetable juices. Determination of chloride content. Potentiometric titration method
BS EN 12134
1998
Fruit and vegetable juices. Determination of centrifugable pulp content
BS EN 12135
1998
Fruit and vegetable juices. Determination of nitrogen content. Kjeldahl method
BS EN 12136
1998
Fruit and vegetable juices. Determination of total carotenoid content and individual carotenoid fractions
BS EN 12137
1998
Fruit and vegetable juices. Determination of tartaric acid in grape juices. Method by high performance liquid chromatography
BS EN 12138
1998
Fruit and vegetable juices. Enzymatic determination of D-malic acid content. NAD spectrometric method
BS EN 12139
1999
Surface active agents. Determination of the total polyethylene glycol content of non-ionic surface active agents (EO adducts) by HPLC/GPC
BS EN 12143
1997
Fruit and vegetable juices. Estimation of soluble solids content. Refractometric method
BS EN 12144
1997
Fruit and vegetable juices. Determination of total alkalinity of ash. Titrimetric method
BS EN 12145
1997
Fruit and vegetable juices. Determination of total dry matter. Gravimetric method with loss of mass on drying
BS EN 12146
1997
Fruit and vegetable juices. Enzymatic determination of sucrose content. NADP spectrometric method
BS EN 12147
1997
Method for determination of titratable acidity of fruit and vegetable juices
BS EN 12148
1997
Fruit and vegetable juices. Determination of hesperidin and naringin in citrus juices. Method using high performance liquid chromatography
BS EN 12149
1998
Wallcoverings in roll form. Determination of migration of heavy metals and certain other elements, of vinyl chloride monomer and of formaldehyde release
BS EN 12150-1
2000
Glass in building. Thermally toughened soda lime silicate safety glass. Definition and description
BS EN 12152
2002
Curtain walling. Air permeability. Performance requirements and classification
BS EN 12153
2000
Curtain walling. Air permeability. Test method
BS EN 12154
2000
Curtain walling. Watertightness. Performance requirements and classification
BS EN 12155
2000
Curtain walling. Watertightness. Laboratory test under static pressure
BS EN 12157
1999
Rotodynamic pumps. Coolant pump units for machine tools. Nominal flow rate, dimensions
BS EN 12158-1
2000
Builders hoists for goods. Hoists with accessible platforms
BS EN 12158-2
2000
Builders hoists for goods. Inclined hoists with non-accessible load carrying devices
BS EN 12159
2000
Builders hoists for persons and materials with vertically guided cages
BS EN 12162
2001
Liquid pumps. Safety requirements. Procedure for hydrostatic testing
BS EN 12163
1998
Copper and copper alloys. Rod for general purposes
BS EN 12164
1998
Copper and copper alloys. Rod for free machining purposes
BS EN 12165
1998
Copper and copper alloys. Wrought and unwrought forging stock
BS EN 12166
1998
Copper and copper alloys. Wire for general purposes
BS EN 12167
1998
Copper and copper alloys. Profiles and rectangular bar for general purposes
BS EN 12168
1998
Copper and copper alloys. Hollow rod for free machining purposes
BS EN 12170
2002
Heating systems in buildings. Procedure for the preparation of documents for operation, maintenance and use. Heating systems requiring a trained operator
BS EN 12171
2002
Heating systems in buildings. Procedure for the preparation of documents for operation, maintenance and use. Heating systems not requiring a trained operator
BS EN 12173
2005
Chemicals used for treatment of water intended for human consumption. Sodium fluoride
BS EN 12174
2110
Chemicals used for treatment of water intended for human consumption. Sodium hexafluorosilicate
BS EN 12175
2001
Chemicals used for treatment of water intended for human consumption. Hexafluorosilicic acid
BS EN 12176
1998
Characterization of sludge. Determination of pH value
BS EN 12178
2003
Refrigerating systems and heat pumps. Liquid level indicating devices. Requirements, testing and marking
BS EN 12180
2000
Non-active surgical implants. Body contouring implants. Specific requirements for mammary implants
BS EN 12181
1998
Oropharyngeal airways
BS EN 12182
1999
Technical aids for disabled persons. General requirements and test methods
BS EN 12183
1999
Manually propelled wheelchairs. Requirements and test methods
BS EN 12184
1999
Electrically powered wheelchairs, scooters and their chargers. Requirements and test methods
BS EN 12186
2000
Gas supply systems. Gas pressure regulating stations for transmission and distribution. Functional requirements
BS EN 12188
1999
Products and systems for the protection and repair of concrete structures. Test methods. Determination of adhesion steel-to-steel for characterization of structural bonding agents
BS EN 12189
1999
Products and systems for the protection and repair of concrete structures. Test methods. Determination of open time
BS EN 12190
1999
Products and systems for the protection and repair of concrete structures. Test methods. Determination of compressive strength of repair mortar
BS EN 12192-1
2002
Products and systems for the protection and repair of concrete structures. Granulometry analysis. Test method for dry components of premixed mortar
BS EN 12192-2
1999
Products and systems for the protection and repair of concrete structures. Granulometry analysis. Test method for fillers for polymer bonding agents
BS EN 12193
1999
Light and lighting. Sports lighting
BS EN 12194
2000
Shutters, external and internal blinds. Misuse. Test methods
BS EN 12195-2
2001
Load restraint assemblies on road vehicles. Safety. Web lashing made from man-made fibres
BS EN 12195-3
2001
Load restraint assemblies on road vehicles. Safety. Lashing chains
BS EN 12196
2003
Gymnastics equipment. Horses and bucks. Functional and safety requirements, test methods
BS EN 12197
1997
Gymnastic equipment. Horizontal bars. Safety requirements and test methods
BS EN 12198-1
2000
Safety of machinery. Assessment and reduction of risks arising from radiation emitted by machinery. General principles
BS EN 12198-3
2002
Safety of machinery. Assessment and reduction of risks arising from radiation emitted by machinery. Reduction of radiation by attenuation or screening
BS EN 12199
1998
Resilient floor coverings. Specifications for homogeneous and heterogeneous relief rubber floor coverings
BS EN 12200-1
2000
Plastics rainwater piping systems for above ground external use. Unplasticized poly (vinyl chloride) (PVC-U). Specifications for pipes, fittings and the system
BS EN 12201-1
2003
Plastic piping systems for water supply. Polyethylene (PE). General
BS EN 12201-2
2003
Plastic piping systems for water supply. Polyethylene (PE). Pipes
BS EN 12201-3
2003
Plastic piping systems for water supply. Polyethylene (PE). Fittings
BS EN 12201-4
2001
Plastic piping systems for water supply. Polyethylene (PE). Valves
BS EN 12201-5
2003
Plastic piping systems for water supply. Polyethylene (PE). Fitness for purpose of the system
BS EN 12203
2003
Footwear, leather and imitation leather goods manufacturing machines. Shoe and leather presses. Safety requirements
BS EN 12205
2001
Transportable gas cylinders. Non-refillable metallic gas cylinders
BS EN 12207
2000
Windows and doors. Air permeability. Classification
BS EN 12208
2000
Windows and doors. Watertightness. Classification
BS EN 12209
2003
Building hardware. Locks and latches. Mechanically operated locks, latches and locking plates. Requirements and test methods
BS EN 12210
2000
Windows and doors. Resistance to wind load. Classification
BS EN 12211
2000
Windows and doors. Resistance to wind load. Test method
BS EN 12213
1999
Cryogenic vessels. Methods for performance evaluation of thermal insulation
BS EN 12216
2002
Shutters, external blinds, internal blinds. Terminology, glossary and definitions
BS EN 12218
1999
Rail systems for supporting medical equipment
BS EN 12218
1999
Rail systems for supporting medical equipment
BS EN 12219
2000
Doors. Climatic influences. Requirements and classification
BS EN 12220
1998
Ventilation for buildings. Ductwork. Dimensions of circular flanges for general ventilation
BS EN 12221-1
2000
Changing units for domestic use. Safety requirements
BS EN 12221-2
2000
Changing units for domestic use. Test methods
BS EN 12222
1997
Footwear. Standard atmospheres for conditioning and testing of footwear and components for footwear
BS EN 12223
2000
Non-destructive testing. Ultrasonic examination. Specification for calibration block No.1
BS EN 12224
2000
Geotextiles and geotextile-related products. Determination of the resistance to weathering
BS EN 12226
2000
Geotextiles and geotextile-related products. General tests for evaluation following durability testing
BS EN 12227-1
1999
Playpens for domestic use. Safety requirements
BS EN 12227-2
1999
Playpens for domestic use. Test methods
BS EN 12228
2002
Surfaces for sports areas. Determination of joint strength of synthetic surfaces
BS EN 12230
2330
Surfaces for sports areas. Determination of tensile properties of synthetic sports surfaces
BS EN 12231
2003
Surfaces for sports areas. Method of test. Determination of ground cover of natural turf
BS EN 12232
2003
Surfaces for sports areas. Determination of thatch depth of natural turf
BS EN 12233
2003
Surfaces for sports areas. Determination of sward height of natural turf
BS EN 12234
2002
Surfaces for sports areas. Determination of ball roll behaviour
BS EN 12236
2002
Ventilation for buildings. Ductwork hangers and supports. Requirements for strength
BS EN 12237
2003
Ventilation for buildings. Ductwork. Strength and leakage of circular sheet metal ducts
BS EN 12238
2001
Ventilation for buildings. Air terminal devices. Aerodynamic testing and rating for mixed flow application
BS EN 12239
2001
Ventilation for buildings. Air terminal devices. Aerodynamic testing and rating for displacement flow applications
BS EN 12240
1997
Touch and close fasteners. Determination of the overall and effective widths of tapes and the effective width of a closure
BS EN 12241
2000
Touch and close fasteners. Method for closure prior to washing and drying or dry cleaning
BS EN 12242
2000
Touch and close fasteners. Determination of peel strength
BS EN 12243
2000
Touch and close fasteners. Determination of dimensional change in washing and drying and dry cleaning
BS EN 12244-1
1998
Direct gas-fired washing machines, of nominal heat input not exceeding 20 kW. Safety
BS EN 12244-2
1998
Direct gas-fired washing machines, of nominal heat input not exceeding 20 kW. Rational use of energy
BS EN 12245
2002
Transportable gas cylinders. Fully wrapped composite cylinders
BS EN 12246
1999
Quality classification of timber used in pallets and packaging
BS EN 12248
1999
Sawn timber used in industrial packaging. Permitted deviations and preferential sizes
BS EN 12249
1999
Sawn timber used in pallets. Permitted deviations and guidelines for dimensions
BS EN 12252
2000
Equipping of liquefied petroleum gas (LPG) road tankers
BS EN 12254
1999
Screens for laser working places. Safety requirements and testing
BS EN 12254
1999
Screens for laser working places. Safety requirements and testing
BS EN 12255-1
2002
Wastewater treatment plants. General construction principles
BS EN 12255-3
2000
Wastewater treatment plants. Preliminary treatment
BS EN 12255-4
2002
Wastewater treatment plants. Primary settlement
BS EN 12255-5
1999
Wastewater treatment plants. Lagooning processes
BS EN 12255-7
2002
Wastewater treatment plants. Biological fixed-film reactors
BS EN 12255-8
2001
Wastewater treatment plants. Sludge treatment and storage
BS EN 12255-9
2002
Wastewater treatment plants. Odour control and ventilation
BS EN 12255-10
2001
Wastewater treatment plants. Saftey principles
BS EN 12255-11
2001
Wastewater treatment plants. General data required
BS EN 12255-12
2003
Wastewater treatment plants. Control and automation
BS EN 12255-13
2002
Wastewater treatment plants. Chemical treatment. Treatment of wastewater by precipitation/flocculation
BS EN 12255-14
2003
Wastewater treatment plants. Disinfection
BS EN 12255-15
2003
Wastewater treatment plants. Measurement of the oxygen transfer in clean water in aeration tanks of activated sludge plants
BS EN 12256
1998
Plastic piping systems. Thermoplastic fittings. Test method for mechanical strength or flexibility of fabricated fittings
BS EN 12257
2002
Transportable gas cylinders. Seamless, hoop-wrapped composite cylinders
BS EN 12258-1
1999
Aluminium and aluminium alloys. Terms and definitions. General terms
BS EN 12260
2003
Water quality. Determination of nitrogen. Determination of bound nitrogen (TNb), following oxidation to nitrogen oxides
BS EN 12261
2002
Gas meters. Turbine gas meters
BS EN 12262
1999
Rotodynamic pumps. Technical documents. Terms, delivery range, layout
BS EN 12263
1999
Refrigerating systems and heat pumps. Safety switching devices for limiting the pressure. Requirements and tests
BS EN 12266-1
2003
Industrial valves. Testing of valves. Pressure tests, test procedures and acceptance criteria. Mandatory requirements
BS EN 12266-1
2003
Industrial valves. Testing of valves. Pressure tests, test procedures and acceptance criteria. Mandatory requirements
BS EN 12266-2
2002
Industrial valves. Testing of valves. Tests, test procedures and acceptance criteria. Supplementary requirements
BS EN 12266-2
2002
Industrial valves. Testing of valves. Tests, test procedures and acceptance criteria. Supplementary requirements
BS EN 12267
2003
Food processing machinery. Circular saw machines. Safety and hygiene requirements
BS EN 12268
2003
Food processing machinery. Band saw machines. Safety and hygiene requirements
BS EN 12269-1
2000
Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the "beam test". Short term test
BS EN 12270
1998
Mountaineering equipment. Chocks. Safety requirements and test methods
BS EN 12271-3
2002
Surface dressing. Specifications. Rate of spread and accuracy of spread of binder and chippings
BS EN 12272-1
2002
Surface dressing. Test methods. Rate of spread and accuracy of spread of binder and chippings
BS EN 12272-2
2003
Surface dressing. Test methods. Visual assessment of defects
BS EN 12272-3
2002
Surface dressing. Test methods. Determination of binder aggregate adhesivity by the Vialit plate shock test method
BS EN 12274-1
2002
Slurry surfacing. Test methods. Sampling for binder extraction
BS EN 12274-2
2003
Slurry surfacing. Test methods. Determination of residual binder content
BS EN 12274-3
2002
Slurry surfacing. Test methods. Consistency
BS EN 12274-4
2003
Slurry surfacing. Test methods. Determination of cohesion of the mix
BS EN 12274-5
2003
Slurry surfacing. Test methods. Determination of wearing
BS EN 12274-6
2002
Slurry surfacing. Test methods. Rate of application
BS EN 12275
1998
Mountaineering equipment. Connectors. Safety requirements and test methods
BS EN 12276-1
1999
Mountaineering equipment. Frictional anchors. Safety requirements and test methods
BS EN 12277
1998
Mountaineering equipment. Harnesses. Safety requirements and test methods
BS EN 12278
1998
Mountaineering equipment. Pulleys. Safety requirements and test methods
BS EN 12279
2000
Gas supply systems. Gas pressure regulating installations on service lines. Functional requirements
BS EN 12280-1
198
Rubber- or plastics-coated fabrics. Accelerated ageing tests. Heat ageing
BS EN 12280-2
2002
Rubber- or plastics-coated fabrics. Accelerated ageing tests. Physical ageing: effect of light or weathering
BS EN 12280-3
2002
Rubber- or plastics-coated fabrics. Accelerated ageing tests. Environmental ageing
BS EN 12281
2002
Printing and business paper. Requirements for copy paper for dry toner imaging processes
BS EN 12283
2002
Printing and business paper. Determination of toner adhesion
BS EN 12284
2003
Refrigerating systems and heat pumps. Valves. Requirements, testing and marking
BS EN 12285-1
2003
Workshop fabricated steel tanks. Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and non-flammable water polluting liquids
BS EN 12286
1999
In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Presentation of reference measurement procedures
BS EN 12287
1999
In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Description of reference materials
BS EN 12288
2003
Industrial valves. Copper alloy gate valves
BS EN 12291
2003
Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure. Determination of compression properties
BS EN 12293
2000
Plastics piping systems. Thermoplastics pipes and fittings for hot and cold water. Test method for the resistance of mounted assemblies to temperature cycling
BS EN 12294
2000
Plastic piping systems. Systems for hot and cold water. Test method for leaktightness under vacuum
BS EN 12295
2000
Plastics piping systems. Thermoplastics pipes and associated fittings for hot and cold water. Test method for resistance of joints to pressure cycling
BS EN 12296
1998
Biotechnology. Equipment. Guidance on testing procedures for cleanability
BS EN 12297
1998
Biotechnology. Equipment. Guidance on testing procedures for sterilizability
BS EN 12298
1998
Biotechnology. Equipment. Guidance on testing procedures for leaktightness
BS EN 12300
1999
Cryogenic vessels. Cleanliness for cryogenic service
BS EN 12301
2000
Rubber and plastics machines. Calenders. Safety requirements
BS EN 12302
2000
Crude tar and crude benzole. Terminology
BS EN 12303
2000
Coal tar based oils. Terminology
BS EN 12305
1998
Biotechnology. Modified organisms for application in the environment. Guidance for the sampling strategies for deliberate releases of genetically modified plants
BS EN 12306
1998
Biotechnology. Guidance for quality control of diagnostic kits used in agriculture, plant and animal pest and disease control and environmental contamination
BS EN 12308
1998
Installations and equipment for LNG. Suitability testing of gaskets designed for flanged joints used on LNG piping
BS EN 12309-1
2000
Gas-fired absorption and adsorption air-conditioning and/or heat pump appliances with a net heat input not exceeding 70 kW. Safety
BS EN 12309-2
2000
Gas-fired absorption and adsorption air-conditioning and/or heat pump appliances with a net heat input not exceeding 70 kW. Rational use of energy
BS EN 12310-1
2000
Flexible sheets for waterproofing. Determination of resistance to tearing (nail shank). Bitumen sheets for roof waterproofing
BS EN 12310-2
2000
Flexible sheets for waterproofing. Determination of resistance to tearing (nail shank). Plastic and rubber sheets for roof waterproofing
BS EN 12311-1
2000
Flexible sheets for waterproofing. Determination of tensile properties. Bitumen sheets for roof waterproofing
BS EN 12311-2
2000
Flexible sheets for waterproofing. Determination of tensile properties. Plastic and rubber sheets for roof waterproofing
BS EN 12312-1
2001
Aircraft ground support equipment. Specific requirements. Passenger stairs
BS EN 12312-2
2002
Aircraft ground support equipment. Specific requirements. Catering vehicles
BS EN 12312-3
2003
Aircraft ground support equipment. Specific requirements. Conveyor belt vehicles
BS EN 12312-4
2003
Aircraft ground support equipment. Specific requirements. Passenger boarding bridges
BS EN 12312-12
2002
Aircraft ground support equipment. Specific requirements. Potable water service equipment
BS EN 12312-13
2002
Aircraft ground support equipment. Specific requirements. Lavatory service equipment
BS EN 12316-1
2000
Flexible sheets for waterproofing. Determination of peel resistance of joints. Bitumen sheets for roof waterproofing
BS EN 12316-2
2000
Flexible sheets for waterproofing. Determination of peel resistance of joints. Plastic and rubber sheets for roof waterproofing
BS EN 12317-1
2000
Flexible sheets for waterproofing. Bitumen sheets for roof waterproofing. Determination of shear resistance of joints
BS EN 12317-2
2000
Flexible sheets for waterproofing. Plastic and rubber sheets for roof waterproofing
BS EN 12320
2001
Building hardware. Padlocks and padlock fittings. Requirements and test methods
BS EN 12321
2003
Underground mining machinery. Specification for the safety requirements of armoured face conveyors
BS EN 12322
1999
In vitro diagnostic medical devices. Culture media for microbiology. Performance criteria for culture media
BS EN 12323
2005
Bar coding. Symbology specifications. "Code 16K"
BS EN 12324-1
1999
Irrigation techniques. Reel machine systems. Size series
BS EN 12324-2
1999
Irrigation techniques. Reel machine systems. Specifications of polyethylene tubes for reel machines
BS EN 12324-3
1999
Irrigation techniques. Reel machine systems. Presentation of technical characteristics
BS EN 12324-4
1999
Irrigation techniques. Reel machine systems. Check list of users requirements
BS EN 12325-1
1999
Irrigation techniques. Centre pivot and moving lateral systems. Presentation of the technical characteristics
BS EN 12325-2
1999
Irrigation techniques. Centre pivot and moving lateral systems. Minimum performances and technical characteristics
BS EN 12325-3
1999
Irrigation techniques. Centre pivot and moving lateral systems. Terminology and classification
BS EN 12326-2
2000
Slate and stone products for discontinuous roofing and cladding. Methods of test
BS EN 12327
2000
Gas supply systems. Pressure testing, commissioning and decommissioning procedures. Functional requirements
BS EN 12329
2000
Corrosion protection of metals. Electrodeposited coatings of zinc with supplementary treatment on iron or steel
BS EN 12330
2000
Corrosion protection of metals. Electrodeposited coatings of cadmium on iron or steel
BS EN 12332-1
1999
Rubber- or plastics-coated fabrics. Determination of bursting strength. Steel ball method
BS EN 12332-2
2002
Rubber- or plastics-coated fabrics. Determination of bursting strength. Hydraulic method
BS EN 12334
2001
Industrial valves. Cast iron check valves
BS EN 12337-1
2000
Glass in building. Chemically strengthened soda lime silicate glass. Definition and description
BS EN 12338
1998
Water quality. Determination of mercury. Enrichment methods by amalgamation
BS EN 12339
1997
Inland navigation vessels. Rope tubs
BS EN 12341
1999
Air quality. Determination of the PM10 fraction of suspended particulate matter. Reference method and field test procedure to demonstrate reference equivalence of measurement methods
BS EN 12342
1998
Breathing tubes intended for use with anaesthetic apparatus and ventilators
BS EN 12345
1999
Welding. Multilingual terms for welded joints with illustrations
BS EN 12346
1999
Gymnastic equipment. Wall bars, lattice ladders and climbing frames. Safety requirements and test methods
BS EN 12347
1998
Biotechnology. Performance criteria for steam sterilizers and autoclaves
BS EN 12348
2000
Core drilling machines on a stand. Safety
BS EN 12350-1
2000
Testing fresh concrete. Sampling
BS EN 12350-2
2000
Testing fresh concrete. Slump test
BS EN 12350-3
2000
Testing fresh concrete. Vebe test
BS EN 12350-4
2000
Testing fresh concrete. Degree of compactability
BS EN 12350-5
2000
Testing fresh concrete. Flow table test
BS EN 12350-6
2000
Testing fresh concrete. Density
BS EN 12350-7
2000
Testing fresh concrete. Air content. Pressure methods
BS EN 12351
1999
Industrial valves. Protective caps for valves with flanged connections
BS EN 12352
2000
Traffic control equipment. Warning and safety light devices
BS EN 12353
2000
Chemical disinfectants and antiseptics. Preservation of microbial strains used for the determination of bactericidal and fungicidal activity
BS EN 12354-1
2000
Building acoustics. Estimation of acoustic performance in buildings from the performance of elements. Airborne sound insulation between rooms
BS EN 12354-2
2000
Building acoustics. Estimation of acoustic performance in buildings from the performance of elements. Impact sound insulation between rooms
BS EN 12354-3
2000
Building acoustics. Estimation of acoustic performance in buildings from the performance of elements. Airborne sound insultation against outdoor sound
BS EN 12354-4
2000
Building acoustics. Estimation of acoustic performance in buildings from the performance of elements. Transmission of indoor sound to the outside
BS EN 12354-6
2003
Building acoustics. Estimation of acoustic performance in buildings from the performance of elements. Sound absorption in enclosed spaces
BS EN 12355
2003
Food processing machinery. Derinding-, skinning- and membrane removal machines. Safety and hygiene requirements
BS EN 12365-1
2003
Building hardware. Gasket and weatherstripping for doors, windows, shutters and curtain walling. Performance requirements and classification
BS EN 12365-2
2003
Building hardware. Gasket and weatherstripping for doors, windows, shutters and curtain walling. Linear compression force test methods
BS EN 12365-3
2003
Building hardware. Gasket and weatherstripping for doors, windows, shutters and curtain walling. Deflection recovery test method
BS EN 12365-4
2003
Building hardware. Gasket and weatherstripping for doors, windows, shutters and curtain walling. Recovery after accelerated ageing test method
BS EN 12368
2000
Traffic control equipment. Signal heads
BS EN 12369-1
2001
Wood-based panels. Characteristic values for structural design. OSB, particleboards and fireboards
BS EN 12370
1999
Natural stone test methods. Determination of resistance to salt crystallization
BS EN 12371
2001
Natural stone test methods. Determination of frost resistance
BS EN 12372
1999
Natural stone test methods. Determination of flexural strength under concentrated load
BS EN 12373-1
2001
Aluminium and aluminium alloys. Anodizing. Method for specifying decorative and protective anodic oxidation coatings on aluminium
BS EN 12373-2
1999
Aluminium and aluminium alloys. Anodizing. Determination of mass per unit area (surface density) of anodic oxidation coatings. Gravimetric method
BS EN 12373-3
1999
Aluminium and aluminium alloys. Anodizing. Determination of thickness of anodic oxidation coatings. Non-destructive measurement by split-beam microscope
BS EN 12373-4
1999
Aluminium and aluminium alloys. Anodizing. Estimation of loss of absorptive power of anodic oxidation coatings after sealing by dye spot test with prior acid treatment
BS EN 12373-5
1999
Aluminium and aluminium alloys. Anodizing. Assessment of quality of sealed anodic oxidation coatings by measurement of admittance
BS EN 12373-6
1999
Aluminium and aluminium alloys. Anodizing. Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution without prior acid treatment
BS EN 12373-7
1999
Aluminium and aluminium alloys. Anodizing. Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution with prior acid treatment
BS EN 12373-8
1999
Aluminium and aluminium alloys. Anodizing. Determination of the comparative fastness to ultra-violet light and heat of coloured anodic oxidation coatings
BS EN 12373-9
1999
Aluminium and aluminium alloys. Anodizing. Measurement of wear resistance and wear index of anodic oxidation coatings using an abrasive wheel wear test apparatus
BS EN 12373-10
1999
Aluminium and aluminium alloys. Anodizing. Measurement of mean specific abrasion resistance of anodic oxidation coatings using an abrasive jet test apparatus
BS EN 12373-11
2001
Aluminium and aluminium alloys. Anodizing. Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20°, 45°, 60°, and 85°
BS EN 12373-13
2001
Aluminium and aluminium alloys. Anodizing. Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer
BS EN 12373-14
2001
Aluminium and aluminium alloys. Anodizing. Visual determination of image clarity of anodic oxidation coatings. Chart scale method
BS EN 12373-15
2001
Aluminium and aluminium alloys. Anodizing. Assessment of resistance of anodic oxidation coatings to cracking by deformation
BS EN 12373-16
2001
Aluminium and aluminium alloys. Anodizing. Check for continuity of thin anodic oxidation coatings. Copper sulfate test
BS EN 12373-17
2001
Aluminium and aluminium alloys. Anodizing. Determination of electric breakdown potential
BS EN 12373-18
2001
Aluminium and aluminium alloys. Anodizing. Rating system for the evaluation of pitting corrosion. Chart method
BS EN 12373-19
2001
Aluminium and aluminium alloys. Anodizing. Rating system for the evaluation of pitting corrosion. Grid method
BS EN 12374
1998
Packaging. Flexible tubes. Terminology
BS EN 12375
1998
Packaging. Flexible aluminium tubes. Wall thickness determination method
BS EN 12376
1999
In vitro diagnostic medical devices. Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology
BS EN 12377
1999
Packaging. Flexible tubes. Test method for the airtightness of closures
BS EN 12380
2002
Air admittance valves for drainage systems. Requirements, test methods and evaluation of conformity
BS EN 12384
1999
Copper and copper alloys. Determination of spring bending limit on strip
BS EN 12385-4
2002
Steel wire ropes. Safety. Stranded ropes for general lifting applications
BS EN 12385-5
2002
Steel wire ropes. Safety. Stranded ropes for lifts
BS EN 12385-6
2004
Steel wire ropes. Safety. Stranded ropes for mine shafts
BS EN 12385-7
2002
Steel wire ropes. Safety. Locked coil ropes for mine shafts
BS EN 12385-8
2002
Steel wire ropes. Safety. Stranded hauling and carrying-hauling ropes for cableway installations designed to carry persons
BS EN 12385-9
2002
Steel wire ropes. Safety. Locked coil carrying ropes for cableway installations designed to carry persons
BS EN 12385-10
2003
Steel wire ropes. Safety. Spiral ropes for general structural applications
BS EN 12385-1
2002
Steel wire ropes. Safety. General requirements
BS EN 12385-2
2002
Steel wire ropes. Safety. Definitions, designation and classification
BS EN 12386
1999
Chemicals used for treatment of water intended for human consumption. Copper sulfate
BS EN 12390-1
2000
Testing hardened concrete. Shape, dimensions and other requirements for specimens and moulds
BS EN 12390-2
2000
Testing hardened concrete. Making and curing specimens for strength tests
BS EN 12390-3
2002
Testing hardened concrete. Compressive strength of test specimens
BS EN 12390-4
2000
Testing hardened concrete. Compressive strength. Specification for testing machines
BS EN 12390-5
2000
Testing hardened concrete. Flexural strength of test specimens
BS EN 12390-6
2000
Testing hardened concrete. Tensile splitting strength of test specimens
BS EN 12390-7
2000
Testing hardened concrete. Density of hardened concrete
BS EN 12390-8
2000
Testing hardened concrete. Depth of penetration of water under pressure
BS EN 12392
2000
Aluminium and aluminium alloys. Wrought products. Special requirements for products intended for the production of pressure equipment
BS EN 12393-1
1999
Non-fatty foods. Multiresidue methods for the gas chromatographic determination of pesticide residues. General considerations
BS EN 12393-2
1999
Non-fatty foods. Multiresidue methods for the gas chromatographic determination of pesticide residues. Methods for extraction and clean-up
BS EN 12393-3
1999
Non-fatty foods. Multiresidue methods for the gas chromatographic determination of pesticide residues. Determination and confirmatory tests
BS EN 12396-1
1999
Non-fatty foods. Determination of dithiocarbamate and thiuram disulfide residues. Spectrometric method
BS EN 12396-2
1999
Non-fatty foods. Determination of dithiocarbamate and thiuram disulfide residues. Gas chromatographic method
BS EN 12396-3
2000
Non-fatty foods. Determination of dithiocarbamate and thiuram disulfide residues. UV spectrometric xanthogenate method
BS EN 12400
2002
Windows and pedestrian doors. Mechanical durability. Requirements and classification
BS EN 12402
1999
Lead and lead alloys. Methods of sampling for analysis
BS EN 12403
1998
Bar coding. Structured data files
BS EN 12405
2002
Gas meters. Gas-volume electronic conversion devices
BS EN 12406
1999
Swap bodies. Thermal swap bodies of class C. Dimensions and general requirements
BS EN 12407
2000
Natural stone test methods. Petrographic examination
BS EN 12409
1999
Rubber and plastics machines. Thermoforming machines. Safety requirements
BS EN 12410
1999
Swap bodies. Thermal swap bodies of class A. Dimensions and general requirements
BS EN 12410
1999
Swap bodies. Thermal swap bodies of class A. Dimensions and general requirements
BS EN 12412-2
2003
Thermal performance of windows, doors and shutters. Determination of thermal transmittance by hot box method. Frames
BS EN 12412-4
2003
Thermal performance of windows, doors and shutters. Determination of thermal transmittance by hot box method. Roller shutter boxes
BS EN 12413
1999
Safety requirements for bonded abrasive products
BS EN 12414
1999
Vehicle parking control equipment. Pay and display ticket machine. Technical and functional requirements
BS EN 12415
2001
Safety of machine tools. Small numerically controlled turning machines and turning centres
BS EN 12416-1
2001
Fixed firefighting systems. Powder systems. Requiremments and test methods for components
BS EN 12416-2
2001
Fixed firefighting systems. Powder systems. Design, construction and maintenance
BS EN 12417
2001
Machine tools. Safety. Machining centres
BS EN 12418
2000
Masonry and stone cutting-off machines for job site. Safety
BS EN 12419
1999
Respiratory protective devices. Light duty construction compressed airline breathing apparatus incorporating a full face mask, half mask or quarter mask. Requirements, testing, marking
BS EN 12421
1998
Magnesium and magnesium alloys. Unalloyed magnesium
BS EN 12422
1999
Sisal twines
BS EN 12423
1999
Polypropylene twines
BS EN 12424
2000
Industrial, commercial and garage doors and gates. Resistance to wind load. Classification
BS EN 12425
2000
Industrial, commercial and garage doors and gates. Resistance to water penetration. Classification
BS EN 12426
2000
Industrial, commercial and garage doors and gates. Air permeability. Classification
BS EN 12427
2000
Industrial, commercial and garage doors and gates. Air permeability. Test method
BS EN 12428
2000
Industrial, commercial and garage doors and gates. Thermal transmittance. Requirements for the calculation
BS EN 12429
1998
Thermal insulating products for building applications. Conditioning to moisture equilibrium under specified temperature and humidity conditions
BS EN 12430
1998
Thermal insulating products for building applications. Determination of behaviour under point load
BS EN 12431
1998
Thermal insulating products for building applications. Determination of thickness for floating floor insulating products
BS EN 12432
1998
Gymnastic equipment. Balancing beams. Functional and safety requirements, test methods
BS EN 12433-1
2000
Industrial, commercial, and garage doors and gates. Terminology. Types of doors
BS EN 12433-2
2000
Industrial, commercial, and garage doors and gates. Terminology. Parts of doors
BS EN 12434
2000
Cryogenic vessels. Cryogenic flexible hoses
BS EN 12434
2000
Cryogenic vessels. Cryogenic flexible hoses
BS EN 12436
2002
Adhesives for load-bearing timber structures. Casein adhesives. Classification and performance requirements
BS EN 12438
1998
Magnesium and magnesium alloys. Magnesium alloys for cast anodes
BS EN 12439
1999
Sterile rectal catheters for single use
BS EN 12440
2001
Natural stone. Denomination criteria
BS EN 12441-1
2002
Zinc and zinc alloys. Chemical analysis. Determination of aluminium in zinc alloys. Titrimetric method
BS EN 12441-2
2002
Zinc and zinc alloys. Chemical analysis. Determination of magnesium in zinc alloys. Flame atomic absorption spectrometric method
BS EN 12441-3
2002
Zinc and zinc alloys. Chemical analysis. Determination of lead, cadmium and copper. Flame atomic absorption spectometric method
BS EN 12441-4
2002
Zinc and zinc alloys. Chemical analysis. Determination of iron in zinc alloys. Spectrophotometric method
BS EN 12441-5
2003
Zinc and zinc alloys. Chemical analysis. Determination of iron in primary zinc. Spectrophotometric method
BS EN 12441-6
2003
Zinc and zinc alloys. Chemical analysis. Determination of aluminium and iron. Flame atomic absorption spectrometric method
BS EN 12442-1
2000
Animal tissues and their derivatives utilized in the manufacture of medical devices. Analysis and management of risk
BS EN 12442-2
2000
Animal tissues and their derivatives utilized in the manufacture of medical devices. Controls on sourcing, collection and handling
BS EN 12442-3
2000
Animal tissues and their derivatives utilized in the manufacture of medical devices. Validation of the elimination and/or inactivation of viruses and transmissible agents
BS EN 12444
2001
Industrial, commercial and garage doors and gates. Resistance to wind load. Testing and calculation
BS EN 12445
2001
Industrial, commercial and garage doors and gates. Safety in use of power operated doors. Test methods
BS EN 12446
2003
Chimneys. Components. Concrete outer wall elements
BS EN 12447
2001
Geotextiles and geotextile-related products. Screening test method for determining the resistance to hydrolysis in water
BS EN 12449
1999
Copper and copper alloys. Seamless, round tubes for general purposes
BS EN 12450
1999
Copper and copper alloys. Seamless, round copper capillary tubes
BS EN 12451
1999
Copper and copper alloys. Seamless, round tubes for heat exchangers
BS EN 12452
1999
Copper and copper alloys. Rolled, finned, seamless tubes for heat exchangers
BS EN 12453
2001
Industrial, commercial and garage doors and gates. Safety in use of power operated doors. Requirements
BS EN 12454
1998
Founding. Visual examination of surface discontinuities. Steel sand castings
BS EN 12455
1999
Resilient floor coverings. Specification for corkment underlay
BS EN 12457-1
2002
Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges. One stage batch test at a liquid to solid ratio of 2 l/kg for materials with high solid content and with particle size below 4 mm (without or with s
BS EN 12457-2
2002
Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges. One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 4 mm (without or with size reduction)
BS EN 12457-3
2002
Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges. Two stage batch test at a liquid to solid ratio of 2 l/kg and 8 l/kg for materials with a high solid content and with a particle size below 4 mm (wi
BS EN 12457-4
2002
Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges. One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with size reduction)
BS EN 12458
1999
Surface active agents. Determination of stability in hard water
BS EN 12460
1998
Biotechnology. Large-scale process and production. Guidance on equipment selection and installation in accordance with the biological risk
BS EN 12461
1998
Biotechnology. Large-scale process and production. Guidance for the handling, inactivating and testing of waste
BS EN 12462
1998
Biotechnology. Performance criteria for pumps
BS EN 12464-1
2002
Light and lighting. Lighting of work places. Indoor work places
BS EN 12465
2001
Wood poles for overhead lines. Durability requirements
BS EN 12466
1998
Resilient floor coverings. Vocabulary
BS EN 12467
2004
Fibre-cement flat sheets. Product specifications and test methods
BS EN 12468
1998
Biotechnology. Modified organisms for application in the environment. Guidance for the monitoring strategies for deliberate releases of genetically modified plants
BS EN 12469
2000
Biotechnology. Performance criteria for microbiological safety cabinets
BS EN 12470-1
2000
Clinical thermometers. Metallic liquid-in-glass thermometers with maximum device
BS EN 12470-2
2001
Clinical thermometers. Phase change type (dot matrix) thermometers
BS EN 12470-3
2000
Clinical thermometers. Performance of compact electrical thermometers (non-predictive and predictive) with maximum device
BS EN 12470-4
2001
Clinical thermometers. Performance of electrical thermometers for continuous measurement
BS EN 12470-5
2003
Clinical thermometers. Performance of infra-red ear thermometers (with maximum device)
BS EN 12472
1999
Method for the simulation of wear and corrosion for the detection of nickel release from coated items
BS EN 12473
2000
General principles of cathodic protection in sea water
BS EN 12474
2001
Cathodic protection for submarine pipelines
BS EN 12475-1
1998
Classification of dense shaped refractory products. Alumina-silica products
BS EN 12475-2
1998
Classification of dense shaped refractory products. Basic products containing less than 7% residual carbon
BS EN 12475-3
1998
Classification of dense shaped refractory products. Basic products containing from 7% to 30% residual carbon
BS EN 12475-4
1999
Classification of dense shaped refractory products. Special products
BS EN 12476
2000
Phosphate conversion coatings of metals. Method of specifying requirements
BS EN 12477
2001
Protective gloves for welders
BS EN 12478
2001
Safety of machine tools. Large numerically controlled turning machines and turning centres
BS EN 12479
2002
Wood poles for overhead lines. Sizes. Methods of measurement and permissible deviations
BS EN 12480
2002
Gas meters. Rotary displacement gas meters
BS EN 12481
2001
Self adhesive tapes. Terminology
BS EN 12482-1
1998
Aluminium and aluminium alloys. Reroll stock for general applications. Specifications for hot rolled reroll stock
BS EN 12482-2
1998
Aluminium and aluminium alloys. Reroll stock for general applications. Specifications for cold rolled reroll stock
BS EN 12483
1999
Liquid pumps. Pump units with frequency inverters. Guarantee and compatibility tests
BS EN 12484-1
1999
Irrigation techniques. Automatic turf irrigation systems. Definition of the programme of equipment by the owner
BS EN 12484-2
2000
Irrigation techniques. Automatic turf irrigation systems. Design and definition of typical technical templates
BS EN 12484-3
2000
Irrigation techniques. Automatic turf irrigation systems. Automatic control and system management
BS EN 12484-4
2002
Irrigation techniques. Automatic turf irrigation systems. Installation and acceptance
BS EN 12484-5
2002
Irrigation techniques. Automatic turf irrigation systems. Testing methods of systems
BS EN 12485
2001
Chemicals used for treatment of water intended for human consumption. Calcium carbonate, high-calcium lime and half-burnt dolomite. Test methods
BS EN 12487
2000
Corrosion protection of metals. rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys
BS EN 12489
2000
Industrial, commercial and garage doors and gates. Resistance to water penetration. Test method
BS EN 12490
1999
Durability of wood and wood-based products. Preservative-treated solid wood. Determination of the penetration and retention of creosote in treated wood
BS EN 12491
2001
Paragliding equipment. Emergency parachutes. Safety requirements and test methods
BS EN 12492
2000
Mountaineering equipment. Helmets for mountaineers. Safety requirements and test methods
BS EN 12492
2000
Mountaineering equipment. Helmets for mountaineers. Safety requirements and test methods
BS EN 12493
2001
Welded steel tanks for liquefied petroleum gas (LPG). Road tankers. Design and manufacture
BS EN 12495
2000
Cathodic protection for fixed steel offshore structures
BS EN 12499
2003
Internal cathodic protection of metallic structures
BS EN 12500
2000
Protection of metallic materials against corrosion. Corrosion likelihood in atmospheric environment. Classification, determination and estimation of corrosivity of atmospheric environments
BS EN 12501-1
2003
Protection of metallic materials against corrosion. Corrosion likelihood in soil. General
BS EN 12501-2
2003
Protection of metallic materials against corrosion. Corrosion likelihood in soil. Low alloyed and non alloyed ferrous materials
BS EN 12503-1
2001
Sports mats. Gymnastic mats, safety requirements
BS EN 12503-2
2001
Sports mats. Pole vault and high jump mats, safety requirements
BS EN 12503-3
2001
Sports mats. Judo mats, safety requirements
BS EN 12503-4
2001
Sports mats. Determination of shock absorption
BS EN 12503-5
2001
Sports mats. Determination of the base friction
BS EN 12503-6
2001
Sports mats. Determination of the top friction
BS EN 12503-7
2001
Sports mats. Determination of static stiffness
BS EN 12504-1
2000
Testing concrete in structures. Cored specimens. Taking, examining and testing in compression
BS EN 12504-2
2001
Testing concrete in structures. Non-destructive testing. Determination of rebound number
BS EN 12505
2000
Food processing machinery. Centrifugal machines for processing edible oils and fats. Safety and hygiene requirements
BS EN 12506
2003
Characterization of waste. Analysis of eluates. Determination of pH, As, Ba, Cd, Cl-, Co, Cr, Cr VI, Cu, Mo, Ni, NO2-, Pb, total S, SO42-, V and Zn
BS EN 12507
2000
Transportation services. Guidance notes on the application of EN ISO 9002 to the road transport, storage and distribution industries
BS EN 12508
2000
Corrosion protection of metals and alloys. Surface treatment, metallic and other inorganic coatings. Vocabulary
BS EN 12509
2001
Timber poles for overhead lines. Test methods. Determination of modulus of elasticity, bending strength, density and moisture content
BS EN 12510
2002
Wood poles for overhead lines. Strength grading criteria
BS EN 12510
2002
Wood poles for overhead lines. Strength grading criteria
BS EN 12511
2002
Wood poles for overhead lines. Determination of characteristic values
BS EN 12512
2001
Timber structures. Test methods. Cyclic testing of joints made with mechanical fasteners
BS EN 12513
2000
Founding. Abrasion resistant cast irons
BS EN 12514-1
2000
Installations for oil supply systems for oil burners. Safety requirements and tests. Parts, oil feed pumps, control and safety devices, supply tanks
BS EN 12514-2
2000
Installations for oil supply systems for oil burners. Safety requirements and tests. Parts, valves, pipes, filters, oil de-aerators, meters
BS EN 12515
1997
Hot environments. Analytical determination and interpretation of thermal stress using calculation of required sweat rate
BS EN 12516-3
2002
Valves. Shell design strength. Experimental method
BS EN 12517
1998
Non-destructive examination of welds. Radiographic examination of welded joints. Acceptance levels
BS EN 12518
2000
Chemicals used for treatment of water intended for human consumption. High-calcium lime
BS EN 12519
2004
Windows and pedestrian doors. Terminology
BS EN 12522-1
1998
Furniture removal activities. Furniture removal for private individuals. Service specification
BS EN 12522-2
1998
Furniture removal activities. Furniture removal for private individuals. Provision of service
BS EN 12523
1999
External limb prostheses and external orthoses. Requirements and test methods
BS EN 12524
2000
Building materials and products. Hygrothermal properties. Tabulated design values
BS EN 12525
1999
Agricultural machinery. Front loaders. Safety
BS EN 12525
2000
Agricultural machinery. Front loaders. Safety
BS EN 12527
1999
Castors and wheels. Test methods and apparatus
BS EN 12528
1999
Castors and wheels. Castors for furniture. Requirements
BS EN 12529
1999
Castors and wheels. Castors for furniture. Castors for swivel chairs. Requirements
BS EN 12530
1999
Castors and wheels. Castors and wheels for manually propelled institutional applications
BS EN 12531
1999
Castors and wheels. Hospital bed castors
BS EN 12532
1999
Castors and wheels. Castors and wheels for applications up to 1,1 m/s (4 km/h)
BS EN 12533
1999
Castors and wheels. Castors and wheels for applications over 1,1 m/s (4 km/h) and up to 4,4 m/s (16 km/h)
BS EN 12534
1999
Welding consumables. Wire electrodes, wires, rods and deposits for gas shielded metal arc welding of high strength steels. Classification
BS EN 12535
2000
Welding consumables. Tubular cored electrodes for gas shielded metal arc welding of high strength steels. Classification
BS EN 12536
2000
Welding consumables. Rods for gas welding of non alloy and creep-resisting steels. Classification
BS EN 12540
2000
Corrosion protection of metals. Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and copper plus nickel plus chromium
BS EN 12541
2002
Sanitary tapware. Pressure flushing valves and automatic closing urinal valves PN 10
BS EN 12542
2002
Static welded cylindrical tanks, serially produced for the storage of Liquefied petroleum gas (LPG) having a volume not greater than 13 m3 and for installation above ground. Design and manufacture
BS EN 12543-1
1999
Non-destructive testing. Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing. Scanning method
BS EN 12543-2
1999
Non-destructive testing. Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing. Pinhole camera radiographic method
BS EN 12543-3
1999
Non-destructive testing. Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing. Slit camera radiographic method
BS EN 12543-4
1999
Non-destructive testing. Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing. Edge method
BS EN 12543-5
1999
Non-destructive testing. Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing. Measurement of the effective focal spot size of mini and micro focus X-ray tubes
BS EN 12544-1
1999
Non-destructive testing. Measurement and evaluation of the X-ray tube voltage. Voltage divider method
BS EN 12544-2
2000
Non-destructive testing. Measurement and evaluation of the X-ray tube voltage. Constancy check by the thick filter method
BS EN 12544-3
1999
Non-destructive testing. Measurement and evaluation of the X-ray tube voltage. Spectrometric method
BS EN 12545
2000
Footwear, leather and imitation leather goods manufacturing machines. Noise test code. Common requirements
BS EN 12546-3
2000
Materials and articles in contact with foodstuffs. Insulated containers for domestic use. Specification for thermal packs
BS EN 12546-1
2000
Materials and articles in contact with foodstuffs. Insulated containers for domestic use. Specification for vacuum ware, insulated flasks and jugs
BS EN 12546-2
2000
Materials and articles in contact with foodstuffs. Insulated containers for domestic use. Specification for insulated bags and boxes
BS EN 12547
1999
Centrifuges. Common safety requirements
BS EN 12548
1999
Lead and alloys. Lead alloy ingots for electric cable sheathing and for sleeves
BS EN 12548
1999
Lead and alloys. Lead alloy ingots for electric cable sheathing and for sleeves
BS EN 12549
1999
Acoustics. Noise test code for fastener driving tools. Engineering method
BS EN 12560-1
2001
Flanges and their joints. Gaskets for Class-designated flanges. Non-metallic flat gaskets with or without inserts
BS EN 12560-2
2001
Flanges and their joints. Gaskets for Class-designated flanges. Spiral wound gaskets for use with steel flanges
BS EN 12560-3
2001
Flanges and their joints. Gaskets for Class-designated flanges. Non-metallic PTFE envelope gaskets
BS EN 12560-4
2001
Flanges and their joints. Gaskets for Class-designated flanges. Corrugated, flat or grooved metallic and filled metallic gaskets for use with steel flanges
BS EN 12560-5
2001
Flanges and their joints. Gaskets for Class-designated flanges. Metallic ring joint gaskets for use with steel flanges
BS EN 12561-1
1999
Railway applications. Tank wagons. Marking of tank wagons for the carriage of dangerous goods
BS EN 12561-2
2002
Railway applications. Tank wagons. Bottom emptying devices for liquid products including vapour return
BS EN 12561-3
2002
Railway applications. Tank wagons. Bottom filling and emptying devices for gases liquefied under pressure
BS EN 12561-4
2002
Railway applications. Tank wagons. Top devices for top emptying and filling of liquid products
BS EN 12561-5
2002
Railway applications. Tank wagons. Top devices for bottom emptying and top filling of liquid products
BS EN 12561-6
2002
Railway applications. Tank wagons. Manholes
BS EN 12561-7
2004
Railway applications. Tank wagons. Platforms and ladders
BS EN 12561-8
2004
Railway applications. Tank wagons. Heating connections
BS EN 12562
1999
Textiles. Para-aramid multifilament yarns. Test methods
BS EN 12563
1999
Non-active surgical implants. Joint replacement implants. Specific requirements for hip joint replacement implants
BS EN 12564
1999
Non-active surgical implants. Joint replacement implants. Specific requirements for knee joint replacement implants
BS EN 12566-1
2000
Small wastewater treatment systems for up to 50 PT. Prefabricated septic tanks
BS EN 12567
2000
Industrial valves. Isolating valves for LNG. Specification for suitability and appropriate verification tests
BS EN 12568
1998
Foot and leg protectors. Requirements and test methods for toecaps and metal penetration resistant inserts
BS EN 12569
1999
Industrial valves. Valves for chemical and petrochemical process industry. Requirements and tests
BS EN 12571
1999
Materials and articles in contact with foodstuffs. Transport units for catering containers containing prepared foodstuffs. Thermal and hygienic requirements and testing
BS EN 12572
1999
Artificial climbing structures. Protection points, stability requirements and test methods
BS EN 12573-1
2000
Welded static non-pressurized thermoplastic tanks. General principles
BS EN 12573-2
2000
Welded static non-pressurized thermoplastic tanks. Calculation of vertical cylindrical tanks
BS EN 12573-4
2000
Welded static non-pressurized thermoplastic tanks. Design and calculation of flanged joints
BS EN 12574-1
2002
Stationary waste containers. Containers with a capacity from 1700 l to 5000 l with flat or dome lid(s), for trunnion, double trunnion or pocket lifting devices. Dimensions and design
BS EN 12574-2
2002
Stationary waste containers. Performance requirements and test methods
BS EN 12574-3
2002
Stationary waste containers. Safety and health requirements
BS EN 12575
1998
Plastics. Thermoset moulding compounds. Determination of the degree of fibre wet out in SMC
BS EN 12576
1998
Plastics. Fibre reinforced composites. Preparation of compression moulded test plates of SMC, BMC and DMC
BS EN 12579
2000
Soil improvers and gStandarding media. Sampling
BS EN 12580
2000
Soil improvers and gStandarding media. Determination of a quantity
BS EN 12582
1999
Surface active agents. Determination of the polyethylene glycol content according to molar mass in non-ionic surface active agents (ethoxylated) by HPLC/ELSD
BS EN 12583
2000
Gas supply systems. Compressor stations. Functional requirements
BS EN 12585
1999
Glass plant, pipeline and fittings. Pipeline and fittings DN 15 to 1000. Compatibility and interchangeability
BS EN 12586
1999
Child care articles. Soother holder. Safety requirements and test methods
BS EN 12588
1999
Lead and lead alloys. Rolled lead sheet for building purposes
BS EN 12589
2001
Ventilation for buildings. Air terminal units. Aerodynamic testing and rating of constant and variable rate terminal units