Tools

Topics & Collections

small text medium text large text

BSI Standards List

Standard
Year
Title
BS EN 13647
2002
Wood and parquet flooring and wood panelling and cladding. Determination of geometrical characteristics
BS EN 13648-1
2002
Cryogenic vessels. Safety devices for protection against excessive pressure. Safety valves for cryogenic service
BS EN 13648-2
2002
Cryogenic vessels. Safety devices for protection against excessive pressure. Bursting disc safety devices for cryogenic service
BS EN 13648-3
2002
Cryogenic vessels. Safety devices for protection against excessive pressure. Determination of required discharge. Capacity and sizing
BS EN 13649
2002
Stationary source emissions. Determination of the mass concentration of individual gaseous organic compounds. Activated carbon and solvent desorption method
BS EN 13650
2001
Soil improvers and gStandarding media. Extraction of aqua regia soluble elements
BS EN 13651
2001
Soil improvers and gStandarding media. Extraction of calcium chloride/DTPA (CAT) soluble elements
BS EN 13652
2001
Soil improvers and gStandarding media. Extraction of water soluble nutrients and elements
BS EN 13654-1
2001
Soil improvers and gStandarding media. Determination of nitrogen. Modified Kjeldahl method
BS EN 13654-2
2001
Soil improvers and gStandarding media. Determination of nitrogen. Dumas method
BS EN 13655
2002
Plastics. Mulching thermoplastic films for use in agriculture and horticulture
BS EN 13656
2002
Characterization of waste. MicStandardave assisted digestion with hydrofluoric (HF), nitric (HNO3), and hydrochloric (HCl) acid mixture for subsequent determination of elements
BS EN 13657
2002
Characterization of waste. Digestion for subsequent determination of aqua regia soluble portion of elements
BS EN 13673-1
2003
Determination of the maximum explosion pressure and the maximum rate of pressure rise of gases and vapours. Determination of the maximum explosion pressure
BS EN 13674-1
2003
Railway applications. Track. Rail. Vignole railway rails 46 kg/m and above
BS EN 13676
2001
Polymer coated paper and board intended for food contact. Detection of pinholes
BS EN 13677-1
2003
Reinforced thermoplastic moulding compounds. Specification for GMT. Designation
BS EN 13677-2
2003
Reinforced thermoplastic moulding compounds. Specification for GMT. Methods of test and general requirements
BS EN 13677-3
2003
Reinforced thermoplastic moulding compounds. Specification for GMT. Specific requirements
BS EN 13683
2003
Garden equipment. Integrally powered shredders/chippers. Safety
BS EN 13687-1
2002
Products and systems for the protection and repair of concrete structures. Test methods. Determination of thermal compatibility. Freeze-thaw cycling with de-icing salt immersion
BS EN 13687-2
2002
Products and systems for the protection and repair of concrete structures. Test methods. Determination of thermal compatibility. Thunder-shower cycling (thermal shock)
BS EN 13687-3
2002
Products and systems for the protection and repair of concrete structures. Test methods. Determination of thermal compatibility. Thermal cycling without de-icing salt impact
BS EN 13687-4
2002
Products and systems for the protection and repair of concrete structures. Test methods. Determination of thermal compatibility. Dry thermal cycling
BS EN 13687-5
2002
Products and systems for the protection and repair of concrete structures. Test methods. Determination of thermal compatibility. Resistance to temperature shock
BS EN 13689
2002
Guidance on the classification and design of plastics piping systems used for renovation
BS EN 13697
2001
Chemical disinfectants and antiseptics. Quantitative non-porous surface test for the evaluation of bactericidal and/or fungicidal activity of chemical disinfectants used in food, industrial, domestic and institutional areas. Test method and requirements w
BS EN 13698-1
2003
Pallet production specification. Construction specification for 800 mm x 1200 mm flat wooden pallets
BS EN 13698-2
2003
Pallet production specification. Construction specification for 1000 mm x 1200 mm flat wooden pallets
BS EN 13701
2001
Space systems. Glossary of terms
BS EN 13704
2002
Chemical disinfectants. Quantitative suspension test for the evaluation of sporicidal activity of chemical disinfectants used in food, industrial, domestic and institutional areas. Test method and requirements (phase 2, step 1)
BS EN 13706-1
2002
Reinforced plastics composites. Specifications for pultruded profiles. Designation
BS EN 13706-2
2002
Reinforced plastics composites. Specifications for pultruded profiles. Method of test and general requirements
BS EN 13706-3
2002
Reinforced plastics composites. Specifications for pultruded profiles. Specific requirements
BS EN 13709
2002
Industrial valves. Steel globe and globe stop and check valves
BS EN 13711
2002
Inland navigation vessels. Winches for ship operation. Safety requirements
BS EN 13716
2002
Surface active agents. Determination of total base nitrogen. Potentiometric titration
BS EN 13717
2002
Surface active agents. Determination of primary, secondary and tertiary amino nitrogen. Potentiometric titration
BS EN 13718-1
2002
Air, water and difficult terrain ambulances. Medical devices interface requirements for the continuity of patient care
BS EN 13718-2
2002
Air, water and difficult terrain ambulances. Operational and technical requirements for the continuity of patient care
BS EN 13719
2002
Geotextiles and geotextile-related products. Determination of the long term protection efficiency of geotextiles in contact with geosynthetic barriers
BS EN 13720
2002
Transportable gas cylinders. Filling conditions for acetylene battery vehicles
BS EN 13723
2002
Methods of test for petroleum and its products. Petroleum products. Determination of low lead contents in gasolines. Wavelength-dispersive X-ray fluorescence spectrometry (XRF)
BS EN 13724
2002
Postal services. Apertures of private letter boxes and letter plates. Requirements and test methods
BS EN 13725
2003
Air quality. Determination of odour concentration by dynamic olfactometry
BS EN 13726-1
2002
Test methods for primary wound dressings. Aspects of absorbency
BS EN 13726-2
2002
Test methods for primary wound dressings. Moisture vapour transmission rate of permeable film dressings
BS EN 13726-3
2003
Test methods for primary wound dressings. Waterproofness
BS EN 13726-4
2003
Test methods for primary wound dressings. Conformability
BS EN 13726-4
2003
Test methods for primary wound dressings. Conformability
BS EN 13726-6
2003
Test methods for primary wound dressings. Odour control
BS EN 13726-6
2003
Test methods for primary wound dressings. Odour control
BS EN 13727
2003
Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants for instruments used in the medical area. Test method and requirements (phase 2, step 1)
BS EN 13732
2002
Food processing machinery. Bulk milk coolers on farms. Requirements for construction, performance, suitability for use, safety and hygiene
BS EN 13733
2002
Products and systems for the protection and repair of concrete structures. Test methods. Determination of the durability of structural bonding agents
BS EN 13736
2003
Safety of machine tools. Pneumatic presses
BS EN 13739-1
2003
Agricultural machinery. Solid fertilizer broadcasters and full width distributors. Environmental protection. Requirements
BS EN 13739-2
2003
Agricultural machinery. Solid fertilizer broadcasters and full width distributors. Environmental protection. Test methods
BS EN 13740-1
2003
Agricultural machinery. Solid fertilizer line-distributors. Environmental protection. Requirements
BS EN 13740-2
2003
Agricultural machinery. Solid fertilizer line-distributors. Environmental protection. Test methods
BS EN 13741
2003
Thermal performance acceptance testing of mechanical draught series wet cooling towers
BS EN 13743
2002
Safety requirements for coated abrasives
BS EN 13745
2004
Surfaces for sports areas. Determination of specular reflectance
BS EN 13750
2002
Domestic water kettles for use on top of stove, cooker or hob. Requirements and test methods
BS EN 13751
2002
Foodstuffs. Detection of irradiated food using photostimulated luminescence
BS EN 13752
2003
Products used for treatment of water intended for human consumption. Manganese dioxide
BS EN 13753
2002
Products used for treatment of water intended for human consumption. Granular activated alumina
BS EN 13754
2003
Products used for treatment of water intended for human consumption. Bentonite
BS EN 13755
2002
Natural stone. Test methods. Determination of water absorption at atmospheric pressure
BS EN 13756
2002
Wood flooring. Terminology
BS EN 13757-1
2002
Communication system for meters and remote reading of meters. Data exchange
BS EN 13758-1
2002
Textiles. Solar UV protective properties. Method of test for apparel fabrics
BS EN 13758-2
2003
Textiles. Solar UV protective properties. Classification and marking of apparel
BS EN 13760
2003
Automotive LPG filling system for light and heavy duty vehicles. Nozzle, test requirements and dimensions
BS EN 13761
2002
Office furniture. Visitors chairs
BS EN 13763-2
2002
Explosives for civil uses. Detonators and relays. Determination of thermal stability
BS EN 13763-4
2003
Explosives for civil uses. Detonators and relays. Determination of resistance to abrasion of leading wires and shock tubes
BS EN 13763-5
2003
Explosives for civil uses. Detonators and relays. Determination of resistance to cutting damage of leading wires and shock tubes
BS EN 13763-6
2003
Explosives for civil uses. Detonators and relays. Determination of resistance to cracking in low temperatures of leading wires
BS EN 13763-7
2003
Explosives for civil uses. Detonators and relays. Determination of the mechanical strength of leading wires, shock tubes, connections, crimps and closures
BS EN 13763-8
2003
Explosives for civil uses. Detonators and relays. Determination of the resistance to vibration of plain detonators
BS EN 13763-9
2003
Explosives for civil uses. Detonators and relays. Determination of resistance to bending of detonators
BS EN 13763-11
2003
Explosives for civil uses. Detonators and relays. Determination of resistance to damage by dropping of detonators and relays
BS EN 13763-12
2003
Explosives for civil uses. Detonators and relays. Determination of resistance to hydrostatic pressure
BS EN 13763-16
2003
Explosives for civil uses. Detonators and relays. Determination of delay accuracy
BS EN 13763-17
2003
Explosives for civil uses. Detonators and relays. Determination of no-fire current of electric detonators
BS EN 13763-18
2003
Explosives for civil uses. Detonators and relays. Determination of series firing current of electric detonators
BS EN 13763-19
2003
Explosives for civil uses. Detonators and relays. Determination of firing impulse of electric detonators
BS EN 13763-20
2003
Explosives for civil uses. Detonators and relays. Determination of total electrical resistance of electric detonators
BS EN 13763-21
2003
Explosives for civil uses. Detonators and relays. Determination of flash-over voltage of electric detonators
BS EN 13763-22
2003
Explosives for civil uses. Detonators and relays. Determination of capacitance, insulation resistance and insulation breakdown of leading wires
BS EN 13763-23
2002
Explosives for civil uses. Detonators and relays. Determination of the shock-wave velocity of shock tube
BS EN 13763-24
2002
Explosives for civil uses. Detonators and relays. Determination of the electrical non-conductivity of shock tube
BS EN 13766
2003
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas. Specification
BS EN 13769
2003
Transportable gas cylinders. Cylinder bundles. Design, manufacture, identification and testing
BS EN 13770
2002
Textiles. Determination of the abrasion resistance of knitted footwear garments
BS EN 13771-1
2003
Compressor and condensing units for refrigeration. Performance testing and test methods. Refrigerant compressors
BS EN 13772
2003
Textiles and textile products. Burning behaviour. Curtains and drapes. Measurement of flame spread of vertically oriented specimens with large ignition source
BS EN 13773
2003
Textiles and textile products. Burning behaviour. Curtains and drapes. Classification scheme
BS EN 13774
2003
Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar. Performance requirements
BS EN 13775-3
2003
Railway applications. Measuring of new and modified freight wagons. Freight wagons with 2 wheelsets
BS EN 13775-1
2003
Railway applications. Measuring of new and modified freight wagons. Measuring principles
BS EN 13775-2
2003
Railway applications. Measuring of new and modified freight wagons. Freight wagons with bogies
BS EN 13776
2002
Filling and discharge procedures for LPG road tankers
BS EN 13780
2003
Touch and close fasteners. Determination of longitudinal shear strength
BS EN 13781
2002
Protective helmets for drivers and passengers of snowmobiles and bobsleighs
BS EN 13783
2002
Foodstuffs. Detection of irradiated food using Direct Epifluorescent Filter Technique/Aerobic Plate Count (DEFT/APC). Screening method
BS EN 13784
2002
Foodstuffs. DNA comet assay for the detection of irradiatied foodstuffs. Screening method
BS EN 13787
2001
Elastomers for gas pressure regulators and associated safety devices for inlet pressures up to 100 bar
BS EN 13788
2002
Machine tools. Safety. Multi-spindle automatic turning machines
BS EN 13789
2002
Industrial valves. Cast iron globe valves
BS EN 13790-1
2003
Agricultural machinery. Sprayers. Inspection of sprayers in use. Field crop sprayers
BS EN 13790-2
2003
Agricultural machinery. Sprayers. Inspection of sprayers in use. Air-assisted sprayers for bush and tree crops
BS EN 13792
2002
Colour coding of taps and valves for use in laboratories
BS EN 13793
2003
Thermal insulating products for building applications. Determination of behaviour under cyclic loading
BS EN 13794
2002
Respiratory protective devices. Self-contained closed-circuit breathing apparatus for escape. Requirements, testing, marking
BS EN 13795-1
2002
Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment. General requirements for manufacturers, processors and products
BS EN 13798
2002
Hydrometry. Specification for a reference raingauge pit
BS EN 13798
2002
Hydrometry. Specification for a reference raingauge pit
BS EN 13799
2002
Contents gauges for LPG tanks
BS EN 13804
2002
Foodstuffs. Determination of trace elements. Performance criteria, general considerations and sample preparation
BS EN 13805
2002
Foodstuffs. Determination of trace elements. Pressure digestion
BS EN 13806
2002
Foodstuffs. Determination of trace elements. Determination of mercury by cold-vapour atomic absorption spectrometry (CVAAS) after pressure digestion
BS EN 13807
2003
Transportable gas cylinders. Battery vehicles. Design, manufacture, identification and testing
BS EN 13809
2003
Tourism services. Travel agencies and tour operators. Terminology
BS EN 13810-1
2002
Wood-based panels. Floating floors. Performance specifications and requirements
BS EN 13811
2003
Sherardizing. Zinc diffusion coatings on ferrous products. Specification
BS EN 13813
2002
Screed material and floor screeds. Screed material. Properties and requirements
BS EN 13816
2002
Transportation. Logistics and services. Public passenger transport. Service quality definition, targeting and measurement
BS EN 13819-1
2002
Hearing protectors. Testing. Physical test methods
BS EN 13819-2
2002
Hearing protectors. Testing. Acoustic test methods
BS EN 13820
2003
Thermal insulating materials for building applications. Determination of organic content
BS EN 13821
2002
Potentially explosive atmospheres. Explosion prevention and protection. Determination of minimum ignition energy of dust/air mixtures
BS EN 13823
2002
Reaction to fire tests for building products. Building products excluding floorings exposed to the thermal attack by a single burning item
BS EN 13826
2003
Peak expiratory flow meters
BS EN 13828
2003
Building valves. Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings. Tests and requirements
BS EN 13829
2001
Thermal performance of buildings. Determination of air permeability of buildings. Fan pressurization method
BS EN 13830
2003
Curtain walling. Product standard
BS EN 13835
2002
Founding. Austenitic cast irons
BS EN 13843
2003
Roller sports equipment. Inline-skates. Safety requirements and test methods
BS EN 13844
2002
Textiles. Monofilaments. Determination of thermal shrinkage
BS EN 13847
2001
Coal tar and pitch based binders and related products. Terminology and classification
BS EN 13848-1
2003
Railway applications / track. Track geometry quality. Characterisation of track geometry
BS EN 13850
2002
Postal services. Quality of service. Measurement of the transit time of end-to-end services for single piece priority mail and first class mail
BS EN 13851
2003
Methods of test for hydraulic setting floor smoothing and/or levelling compounds. Determination of flexural and compressive strength
BS EN 13854
2003
Manufactured articles solely filled with feather and down. Requirements for upholstered parts and cushions
BS EN 13855-1
2003
Manufactured articles solely filled with feathers and down. Measurement of thickness and compressibility of cushions. Test method by rotation
BS EN 13855-2
2003
Manufactured articles solely filled with feathers and down. Measurement of thickness and compressibility of cushions. Test method by oscillation
BS EN 13856
2002
Minimum requirements for the content of the user manual for automotive LPG systems
BS EN 13857-1
2003
Explosives for civil uses. Terminology
BS EN 13857-3
2002
Explosives for civil uses. Information to be provided by the manufacturer or his authorised representative to the user
BS EN 13858
2003
Corrosion protection of metals. Non-electrolytically applied zinc flake coatings on iron or steel components
BS EN 13860-1
2003
Non destructive testing. Eddy current examination. Equipment characteristics and verification. Instrument characteristics and verification
BS EN 13860-2
2003
Non destructive testing. Eddy current examination. Equipment characteristics and verification. Probe characteristics and verification
BS EN 13860-3
2003
Non destructive testing. Eddy current examination. Equipment characteristics and verification. System characteristics and verification
BS EN 13861
2002
Safety of machinery. Guidance for the application of ergonomics standards in the design of machinery
BS EN 13862
2001
Floor cutting-off machines. Safety
BS EN 13863-2
2003
Concrete pavements. Test method for the determination of the bond between two layers
BS EN 13865
2003
Surfaces for sports areas. Determination of angled ball behaviour. Tennis
BS EN 13867
2002
Concentrates for haemodialysis and related therapies
BS EN 13868
2002
Catheters. Test methods for kinking of single lumen catheters and medical tubing
BS EN 13869
2002
Lighters. Child-resistance for lighters. Safety requirements and test methods
BS EN 13872
2004
Method of test for smoothing and/or levelling compounds. Determination of shrinkage
BS EN 13878
2003
Leisure accommodation vehicles. Terms and definitions
BS EN 13879
2002
Wood-based panels. Determination of edgewise bending properties
BS EN 13880-1
2003
Hot applied joint sealants. Test method for the determination of density at 25°C
BS EN 13880-2
2003
Hot applied joint sealants. Test method for the determination of cone penetration at 25°C
BS EN 13880-3
2003
Hot applied joint sealants. Test method for the determination of penetration and recovery (resilience)
BS EN 13880-4
2003
Hot applied joint sealants. Test method for the determination of heat resistance. Change in penetration value
BS EN 13880-6
2004
Hot applied joint sealants. Method for the preparation of samples for testing
BS EN 13880-7
2003
Hot applied joint sealants. Function testing of joint sealants
BS EN 13880-8
2003
Hot applied joint sealants. Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion
BS EN 13880-9
2003
Hot applied joint sealants. Test method for the determination of compatibility with asphalt pavements
BS EN 13880-10
2003
Hot applied joint sealants. Test method for the determination of adhesion and cohesion following continuous extension and compression
BS EN 13880-11
2003
Hot applied joint sealants. Test method for the preparation of asphalt test blocks used in the function test and for the determination of compatibility with asphalt pavements
BS EN 13880-13
2003
Hot applied joint sealants. Test method for the determination of the discontinuous extension (adherence test)
BS EN 13887
2003
Structural adhesives. Guidelines for surface preparation of metals and plastics prior to adhesive bonding
BS EN 13888
2002
Grouts for tiles. Definitions and specifications
BS EN 13889
2002
Forged steel shackles for general lifting purposes. Dee shackles and bow shackles. Grade 6. Safety
BS EN 13890
2002
Workplace atmospheres. Procedures for measuring metals and metalloids in airborne particles. Requirements and test methods
BS EN 13892-1
2002
Methods of test for screed materials. Sampling, making and curing specimens for test
BS EN 13892-2
2002
Methods of test for screed materials. Determination of flexural and compressive strength
BS EN 13892-4
2002
Methods of test for screed materials. Determination of wear resistance-BCA
BS EN 13892-5
2330
Methods of test for screed materials. Determination of wear resistance to rolling wheel of screed material for wearing layer
BS EN 13892-6
2002
Methods of test for screed materials. Determination of surface hardness
BS EN 13892-7
2003
Methods of test for screed materials. Determination of wear resistance to rolling wheel of screed material with floor coverings
BS EN 13892-8
2002
Methods of test for screed materials. Determination of bond strength
BS EN 13893
2002
Resilient, laminate and textile floor coverings. Measurement of dynamic coefficient of friction on dry floor surfaces
BS EN 13894-1
2003
Products and systems for the protection and repair of concrete structures. Test methods. Determination of fatigue under dynamic loading. During cure
BS EN 13894-2
2002
Products and systems for the protection and repair of concrete structures. Test methods. Determination of fatigue under dynamic loading. After hardening
BS EN 13895
2003
Textiles. Monofilaments. Determination of tensile properties
BS EN 13898
2003
Machine tools. Safety. Sawing machines for cold metal
BS EN 13899
2003
Roller sports equipment. Roller skates. Safety requirements and test methods
BS EN 13900-1
2003
Pigments and extenders. Methods of dispersion and assessment of dispersibility in plastics. General introduction
BS EN 13900-2
2003
Pigments and extenders. Methods of dispersion and assessment of dispersibility in plastics. Determination of colouristic properties and ease of dispersion in plasticized polyvinyl chloride by two-roll milling
BS EN 13900-3
2003
Pigments and extenders. Methods of dispersion and assessment of dispersibility in plastics. Determination of colouristic properties and ease of dispersion of black and colour pigments in polyethylene by two-roll milling
BS EN 13904
2003
Low resistance shower outlets for sanitary tapware
BS EN 13905
2003
Low resistance shower hoses for sanitary tapware
BS EN 13906-1
2002
Cylindrical helical springs made from round wire and bar. Calculation and design. Compression springs
BS EN 13906-2
2001
Cylindrical helical springs made from round wire and bar. Calculation and design. Extension springs
BS EN 13906-3
2001
Cylindrical helical springs made from round wire and bar. Calculation and design. Torsion springs
BS EN 13913
2003
Railway applications. Rubber suspension components. Elastomer-based mechanical parts
BS EN 13918
2003
Gas welding equipment. Integrated flowmeter regulators used on cylinders for welding, cutting and allied processes. Classification, specification and tests
BS EN 13919
2002
Natural stone test methods. Determination of resistance to ageing by SO2 action in the presence of humidity
BS EN 13920-1
2003
Aluminium and aluminium alloys. Scrap. General requirements, sampling and tests
BS EN 13920-2
2003
Aluminium and aluminium alloys. Scrap. Unalloyed aluminium scrap
BS EN 13920-3
2003
Aluminium and aluminium alloys. Scrap. Wire and cable scrap
BS EN 13920-4
2003
Aluminium and aluminium alloys. Scrap. Scrap consisting of one single wrought alloy
BS EN 13920-5
2003
Aluminium and aluminium alloys. Scrap. Scrap consisting of two or more wrought alloys of the same series
BS EN 13920-6
2003
Aluminium and aluminium alloys. Scrap. Scrap consisting of two or more wrought alloys
BS EN 13920-7
2003
Aluminium and aluminium alloys. Scrap. Scrap consisting of castings
BS EN 13920-8
2003
Aluminium and aluminium alloys. Scrap. Scrap consisting of non-ferrous materials from shredding processes destined to aluminium separation processes
BS EN 13920-10
2003
Aluminium and aluminium alloys. Scrap. Scrap consisting of used aluminium beverage cans
BS EN 13920-11
2003
Aluminium and aluminium alloys. Scrap. Scrap consisting of aluminium-copper radiators
BS EN 13920-12
2003
Aluminium and aluminium alloys. Scrap. Turnings consisting of one single alloy
BS EN 13920-13
2003
Aluminium and aluminium alloys. Scrap. Mixed turnings consisting of two or more alloys
BS EN 13920-14
2003
Aluminium and aluminium alloys. Scrap. Scrap from post-consumer aluminium packagings
BS EN 13920-15
2003
Aluminium and aluminium alloys. Scrap. Decoated aluminium scrap from post-consumer aluminium packagings
BS EN 13920-15
2003
Aluminium and aluminium alloys. Scrap. Decoated aluminium scrap from post-consumer aluminium packagings
BS EN 13925-1
2003
Non-destructive testing. X-ray diffraction from polycrystalline and amorphous materials. General principles
BS EN 13925-2
2003
Non-destructive testing. X-ray diffraction from polycrystalline and amorphous materials. Procedures
BS EN 13926
2003
Surface active agents. Alkoxylated derivatives. Determination of hydroxyl value. N-methyl imidazole method
BS EN 13927
2003
Non-destructive testing. Visual testing. Equipment
BS EN 13938-3
2003
Explosives for civil uses. Propellants and rocket propellants. Determination of deflagration to detonation transition
BS EN 13941
2003
Design and installation of preinsulated bonded pipe systems for direct heating
BS EN 13942
2003
Petroleum and natural gas industries. Pipeline transportation. Pipeline valves
BS EN 13946
2003
Water quality. Guidance standard for the routine sampling and pretreatment of benthic diatoms from rivers
BS EN 13949
2003
Respiratory equipment. Open-circuit self-contained diving apparatus for use with compressed Nitrox and oxygen. Requirements, testing, marking
BS EN 13951
2003
Liquid pumps. Safety requirements. Agrifoodstuffs equipment. Design rules to ensure hygiene in use
BS EN 13952
2003
LPG cylinders. Filling procedures
BS EN 13953
2003
Pressure relief valves for transportable refillable cylinders for liquefied petroleum gas (LPG)
BS EN 13955
2002
Surface active agents. Determination of Krafft point and solubility of ionic surface active agents
BS EN 13957
2003
Aluminium and aluminium alloys. Extruded round, coiled tube for general applications. Specification
BS EN 13958
2003
Aluminium and aluminium alloys. Cold drawn, round coiled tube for general applications. Specification
BS EN 13971
2002
Carbonate liming materials. Determination of reactivity. Potentiometric titration method with hydrochloric acid
BS EN 13972
2002
Rigid plastic containers. Definition of nominal, brimful and total capacity and measurement of brimful and total capacity
BS EN 13973
2002
Rigid plastics containers. Method for determination of drainability
BS EN 13974
2002
Rigid plastics containers. Specification of tolerance for dimensions, weight and volume
BS EN 13975
2003
Sampling procedures used for acceptance testing of in vitro diagnostic medical devices. Statistical aspects
BS EN 13976-1
2003
Rescue systems. Transportation of incubators. Interface conditions
BS EN 13976-2
2003
Rescue systems. Transportation of incubators. System requirements
BS EN 13979-1
2003
Railway applications. Wheelsets and bogies. Monobloc wheels.Technical approval procedure. Forged and rolled wheels
BS EN 13981-1
2003
Aluminium and aluminium alloys. Products for structural railway applications. Technical conditions for inspection and delivery. Extruded products
BS EN 13985
2003
Machine tools. Safety. Guillotine shears
BS EN 13986
2004
Wood-based panels for use in construction. Characteristics, evaluation of conformity and marking
BS EN 13991
2003
Derivatives from coal pyrolysis. Coal tar based oils. Creosotes. Specifications and test methods
BS EN 13996
2002
Surface active agents. Foaming power and antifoaming power. Turbine stirring method
BS EN 13997
2003
Irrigation techniques. Connection and control accessories for use in irrigation systems. Technical characteristics and testing
BS EN 14010
2003
Safety of machinery. Equipment for power driven parking of motor vehicles. Safety and EMC requirements for design, manufacturing, erection and commissioning stages
BS EN 14011
2003
Water quality. Sampling of fish with electricity
BS EN 14012
2003
Postal services. Quality of service. Measurement of complaints and redress procedures
BS EN 14016-1
2004
Binders for magnesite screeds. Caustic magnesia and magnesium chloride. Definitions, requirements
BS EN 14016-2
2004
Binders for magnesite screeds. Caustic magnesia and magnesium chloride. Test methods
BS EN 14020-1
2002
Reinforcements. Specification for textile glass rovings. Designation
BS EN 14020-2
2002
Reinforcements. Specification for textile glass rovings. Methods of test and general requirements
BS EN 14020-3
2002
Reinforcements. Specification for textile glass rovings. Specific requirements
BS EN 14021
2003
Stone shields for off-road motorcycling suited to protect riders against stones and debris. Requirements and test methods
BS EN 14022
2003
Structural adhesives. Determination of the pot life (working life) of multicomponent adhesives
BS EN 14030
2001
Geotextiles and geotextile-related products. Screening test method for determining the resistance to acid and alkaline liquids
BS EN 14031
2003
Workplace atmospheres. Determination of airborne endotoxins
BS EN 14035-1
2003
Fireworks. Terminology
BS EN 14035-15
2003
Fireworks. Fountains. Specification and test methods
BS EN 14035-19
2003
Fireworks. Hand-held sparklers. Specification and test methods
BS EN 14035-23
2003
Fireworks. Non-hand-held sparklers. Specification and test methods
BS EN 14035-27
2003
Fireworks. Rockets. Specification and test methods
BS EN 14035-34
2003
Fireworks. Table bombs. Specification and test methods
BS EN 14036
2003
Child use and care articles. Baby bouncers. Safety requirements and test methods
BS EN 14037-1
2003
Ceiling mounted radiant panels supplied with water at temperature below 120°C. Technical specifications and requirements
BS EN 14037-2
2003
Ceiling mounted radiant panels supplied with water at temperature below 120°C. Test methods for thermal output
BS EN 14037-3
2003
Ceiling mounted radiant panels supplied with water at temperature below 120°C. Rating method and evaluation of radiant thermal output
BS EN 14042
2003
Workplace atmospheres. Guide for the application and use of procedures for the assessment of exposure to chemical and biological agents
BS EN 14045
2003
Packaging. Evaluation of the disintegration of packaging materials in practical oriented tests under defined composting conditions
BS EN 14046
2003
Packaging. Evaluation of the ultimate aerobic biodegradability and disintegration of packaging materials under controlled composting conditions. Method by analysis of released carbon dioxide
BS EN 14047
2002
Packaging. Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium. Method by analysis of evolved carbon dioxide
BS EN 14048
2002
Packaging. Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium. Method by measuring the oxygen demand in a closed respirometer
BS EN 14049
2003
Water application intensity. Calculation principles and measurement methods
BS EN 14056
2003
Laboratory furniture. Recommendations for design and installation
BS EN 14057
2003
Lead and lead alloys. Scraps. Terms and definitions
BS EN 14059
2002
Decorative oil lamps. Safety requirements and test methods
BS EN 14065
2002
Textiles. Laundry processed textiles. Biocontamination control system
BS EN 14066
2003
Natural stone test methods. Determination of resistance to ageing by thermal shock
BS EN 14067-1
2003
Railway applications. Aerodynamics. Symbols and units
BS EN 14067-2
2003
Railway applications. Aerodynamics. Aerodynamics on open track
BS EN 14067-3
2003
Railway applications. Aerodynamics. Aerodynamics in tunnels
BS EN 14068
2003
Products and systems for the protection and repair of concrete structures. Test methods. Determination of watertightness of injected cracks without movement in concrete
BS EN 14069
2003
Liming materials. Description and minimum requirements
BS EN 14075
2002
Static welded steel cylindrical tanks, serially produced for the storage of liquefied petroleum gas (LPG) having a volume not greater than 13 m3 and for installation underground. Design and manufacture
BS EN 14078
2003
Liquid petroleum products. Determination of fatty acid methyl esters (FAME) in middle distillates. Infrared spectroscopy method
BS EN 14079
2003
Non-active medical devices. Performance requirements and test methods for absorbent cotton gauze and absorbent cotton and viscose gauze
BS EN 14082
2003
Foodstuffs. Determination of trace elements. Determination of lead, cadmium, zinc, copper, iron and chromium by atomic absorption spectrometry (AAS) after ash drying
BS EN 14083
2003
Foodstuffs. Determination of trace elements. Determination of lead, cadmium, chromium and molybdenum by graphite furnace atomic absorption spectrometry (GFAAS) after pressure digestion
BS EN 14084
2003
Foodstuffs. Determination of trace elements. Determination of lead, cadmium, zinc, copper and iron by atomic absorption spectrometry (AAS) after micStandardave digestion
BS EN 14085
2003
Resilient floor coverings. Specification for floor panels for loose laying
BS EN 14086
2003
Paper and board. Measurement of specular gloss. 45° gloss with a parallel beam, DIN method
BS EN 14089
2002
Space product assurance. The control of limited shelf-life materials
BS EN 14090
2002
Space product assurance. Flammability testing for the screening of space materials
BS EN 14091
2002
Space product assurance. Thermal vacuum outgassing test for the screening of space materials
BS EN 14092
2002
Space engineering. Space environment
BS EN 14093
2002
Space project management. Organization and conduct of reviews
BS EN 14095
2003
Water conditioning equipment inside buildings. Electrolytic treatment systems with aluminium anodes. Requirements for performance, safety and testing
BS EN 14096-1
2003
Non-destructive testing. Qualification of radiographic film digitisation systems. Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control
BS EN 14096-2
2003
Non-destructive testing. Qualification of radiographic film digitisation systems. Minimum requirements
BS EN 14097
2001
Space product assurance. Nonconformance control system
BS EN 14098
2001
Space product assurance. Thermal cycling test for the screening of space materials and processes
BS EN 14099
2001
Space product assurance. Measurement of the peel and pull-off strength of coatings and finishes using pressure-sensitive tapes
BS EN 14100
2001
Space product assurance. The determination of offgassing products from materials and assembled articles to be used in a manned space vehicle crew compartment
BS EN 14101
2001
Space product assurance. Material selection for controlling stress-corrosion cracking
BS EN 14103
2003
Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of ester and linolenic acid methyl ester contents
BS EN 14104
2003
Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of acid value
BS EN 14105
2003
Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of free and total glycerol and mono-, di-, triglyceride contents (Reference method)
BS EN 14106
2003
Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of free glycerol content
BS EN 14107
2003
Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of phosphorous content by inductively coupled plasma (ICP) emission spectrometry
BS EN 14108
2003
Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of sodium content by atomic absorption spectrometry
BS EN 14109
2003
Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of potassium content by atomic absorption spectrometry
BS EN 14110
2003
Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of methanol content
BS EN 14111
2003
Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of iodine value
BS EN 14112
2003
Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of oxidation stability (accelerated oxidation test)
BS EN 14114
2002
Hygrothermal performance of building equipment and industrial installations. Calculation of water vapour diffusion. Cold pipe insulation systems
BS EN 14115
2002
Textiles. Burning behaviour of materials for marquees, large tents and related products. Ease of ignition
BS EN 14116
2003
Tanks for transport of dangerous goods. Digital interface for the product recognition device
BS EN 14118-1
2003
Reinforcement. Specifications for textile glass mats (chopped strand and continuous filament mats). Designation
BS EN 14118-2
2003
Reinforcement. Specifications for textile glass mats (chopped strand and continuous filament mats). Methods of test and general requirements
BS EN 14118-3
2003
Reinforcement. Specifications for textile glass mats (chopped strand and continuous filament mats). Specific requirements
BS EN 14119
2003
Testing of textiles. Evaluation of the action of microfungi
BS EN 14120
2003
Protective clothing. Wrist, palm, knee and elbow protectors for users of roller sports equipment. Requirements and test methods
BS EN 14121
2003
Aluminium and aluminium alloys. Aluminium sheet, strip and plate for electrotechnical applications
BS EN 14122
2003
Foodstuffs. Determination of vitamin B1 by HPLC
BS EN 14123
2003
Foodstuffs. Determination of aflatoxin B1 and the sum of aflatoxin B1, B2, G1 and G2 in peanuts, pistachios, figs, and paprika powder. High performance liquid chromatographic method with postcolumn derivatization and immunoaffinity column clean-up
BS EN 14126
2003
Protective clothing. Performance requirements and tests methods for protective clothing against infective agents
BS EN 14128
2003
Durability of wood and wood-based products. Performance criteria for curative wood preservatives as determined by biological tests
BS EN 14130
2003
Foodstuffs. Determination of vitamin C by HPLC
BS EN 14131
2003
Foodstuffs. Determination of folate by microbiological assay
BS EN 14132
2003
Foodstuffs. Determination of ochratoxin A in barley and roasted coffee. HPLC method with immunoaffinity column clean-up
BS EN 14133
2003
Foodstuffs. Determination of ochratoxin A in wine and beer. HPLC method with clean-up on a immunoaffinity column clean-up
BS EN 14137
2003
Postal services. Quality of service. Measurement of loss of registered mail and other types of postal service using a track and trace system
BS EN 14139
2002
Ophthalmic optics. Specifications for ready-to-wear spectacles
BS EN 14140
2003
Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG). Alternative design and construction
BS EN 14141
2003
Valves for natural gas transportation in pipelines. Performance requirements and tests
BS EN 14142-1
2003
Postal services. Address databases. Components of postal addresses
BS EN 14143
2003
Respiratory equipment. Self-contained re-breathing diving apparatus
BS EN 14144
2003
Lifebuoys. Requirements, tests
BS EN 14145
2003
Holders for lifebuoys
BS EN 14147
2003
Natural stone test methods. Determination of resistance to ageing by salt mist
BS EN 14148
2003
Foodstuffs. Determination of vitamin K1 by HPLC
BS EN 14152
2003
Foodstuffs. Determination of vitamin B2 by HPLC
BS EN 14153-1
2003
Recreational diving services. Safety related minimum requirements for the training of recreational scuba divers. Level 1. Supervised Diver
BS EN 14153-2
2003
Recreational diving services. Safety related minimum requirements for the training of recreational scuba divers. Level 2. Autonomous Diver
BS EN 14153-3
2003
Recreational diving services. Safety related minimum requirements for the training of recreational scuba divers. Level 3. Dive Leader
BS EN 14155
2003
Derivatives from coal pyrolysis. Carbon black feedstock. Specifications and test methods
BS EN 14156
2003
Derivatives from coal pyrolysis. Coal tar based oils. Coal tar fuel. Specifications and test methods
BS EN 14160
2002
Space engineering. Software
BS EN 14161
2003
Petroleum and natural gas industries. Pipeline transportation systems
BS EN 14163
2001
Petroleum and natural gas industries. Pipeline transportation systems. Welding of pipelines
BS EN 14173
2002
Structural adhesives. T-peel test for flexible-to-flexible bonded assemblies
BS EN 14175-1
2003
Fume cupboards. Vocabulary
BS EN 14175-2
2003
Fume cupboards. Safety and performance requirements
BS EN 14176
2003
Foodstuffs. Determination of domoic acid in mussels by HPLC
BS EN 14177
2003
Foodstuffs. Determination of patulin in clear and cloudy apple juice and puree. HPLC method with liquid/liquid partition clean-up
BS EN 14180
2003
Sterilizers for medical purposes. Low temperature steam and formaldehyde sterilizers. Requirements and testing
BS EN 14182
2002
Packaging. Terminology. Basic terms and definitions
BS EN 14183
2003
Step stools
BS EN 14184
2003
Water quality. Guidance standard for the surveying of aquatic macrophytes in running waters
BS EN 14185-1
2003
Non-fatty food. Determination of N-methylcarbamate residues. HPLC-method with SPE clean-up
BS EN 14187-1
2003
Cold applied joint sealants. Test method for the determination of rate of cure
BS EN 14187-2
2003
Cold applied joint sealants. Test method for the determination of tack free time
BS EN 14187-3
2003
Cold applied joint sealants. Test method for the determination of self-levelling properties
BS EN 14187-4
2003
Cold applied joint sealants. Test method for the determination of the change in mass and volume after immersion in test fuel
BS EN 14187-5
2003
Cold applied joint sealants. Test method for the determination of the resistance to hydrolysis
BS EN 14187-6
2003
Cold applied joint sealants. Test method for the determination of the adhesion/cohesion properties after immersion in chemical liquids
BS EN 14187-7
2003
Cold applied joint sealants. Test method for the determination of the resistance to flame
BS EN 14187-7
2003
Cold applied joint sealants. Test method for the determination of the resistance to flame
BS EN 14189
2003
Transportable gas cylinders. Inspection and maintenance of cylinder valves at time of periodic inspection of gas cylinders
BS EN 14196
2003
Geosynthetics. Test methods for measuring mass per unit area of clay geosynthetic barriers
BS EN 14197-1
2003
Cryogenic vessels. Static non-vacuum insulated vessels. Fundamental requirements
BS EN 14197-2
2003
Cryogenic vessels. Static non-vacuum insulated vessels. Design, fabrication, inspection and testing
BS EN 14197-3
2004
Cryogenic vessels. Static non-vacuum insulated vessels. Operational requirements
BS EN 14200
2004
Railway applications. Suspension components. Parabolic springs, steel
BS EN 14201
2004
Blinds and shutters. Resistance to repeated operations (mechanical endurance). Methods of testing
BS EN 14205
2003
Natural stone test methods. Determination of Knoop hardness
BS EN 14207
2003
Water quality. Determination of epichlorohydrin
BS EN 14210
2003
Surface active agents. Determination of interfacial tension of solutions of surface active agents by the stirrup or ring method
BS EN 14213
2003
Heating fuels. Fatty acid methyl esters (FAME). Requirements and test methods
BS EN 14214
2003
Automotive fuels. Fatty acid methyl esters (FAME) for diesel engines. Requirements and test methods
BS EN 14214
2003
Automotive fuels. Fatty acid methyl esters (FAME) for diesel engines. Requirements and test methods
BS EN 14215
2003
Textile floor coverings. Classification of machine-made pile rugs and runners
BS EN 14218
2003
Hexagon nuts with flange. Fine pitch thread
BS EN 14219
2003
Hexagon bolts with flange with metric fine pitch thread. Small series
BS EN 14222
2005
Stainless steel shell boilers
BS EN 14231
2003
Natural stone test methods. Determination of the slip resistance by means of the pendulum tester
BS EN 14233
2002
Materials and articles in contact with foodstuffs. Plastics. Determination of temperature of plastics materials and articles at the plastics/food interface during micStandardave and conventional oven heating in order to select the appropriate temperature for m
BS EN 14240
2004
Ventilation for buildings. Chilled ceilings. Testing and rating
BS EN 14253
2003
Mechanical vibration. Measurement and calculation of occupational exposure to whole-body vibration with reference to health. Practical guidance
BS EN 14259
2003
Adhesives for floor coverings. Requirements for mechanical and electrical performance
BS EN 14260
2003
Derivatives from coal pyrolysis. Coal tar and pitch based binders and related products. Road tars. Characteristics and test methods
BS EN 14261
2003
Derivatives from coal pyrolysis. Coal tar and pitch based binders and related products. Refractory binders. Characteristics and test methods
BS EN 14262
2003
Derivatives from coal pyrolysis. Coal tar and pitch based binders and related products. Briquetting pitch. Characteristics and test methods
BS EN 14263
2003
Derivatives from coal pyrolysis. Coal tar and pitch based binders and related products. Carbon binder pitch. Characteristics and test methods
BS EN 14264
2003
Derivatives from coal pyrolysis. Coal tar and pitch based binders and related products. Impregnating pitch. Characteristics and test methods
BS EN 14265
2003
Derivatives from coal pyrolysis. Coal tar and pitch based binders and related products. Painting tar. Characteristics and test methods
BS EN 14266
2003
Derivatives from coal pyrolysis. Coal tar and pitch based binders and related products. Coating tar. Characteristics and test methods
BS EN 14288
2003
Leather. Physical and mechanical tests. Determination of fogging characteristics
BS EN 14289
2003
Leather. Physical and mechanical tests. Determination of water penetration pressure
BS EN 14295
2003
Welding consumables. Wire and tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels. Classification
BS EN 14325
2004
Protective clothing against chemicals. Test methods and performance classification of chemical protective clothing materials, seams, joins and assemblages
BS EN 14326
2003
Leather. Physical and mechanical tests. Determination of resistance to horizontal spread of flame
BS EN 14327
2003
Leather. Physical and mechanical tests. Determination of abrasion resistance of automotive leather
BS EN 14330
2003
Inland navigation vessels. Studless anchor chain. Round steel link chain
BS EN 14338
2003
Paper and board intended to come into contact with foodstuffs. Conditions for determination of migration from paper and board using modified polyphenylene oxide (MPPO) as a simulant
BS EN 14340
2004
Leather. Physical and mechanical tests. Determination of water repellency of garment leather
BS EN 14362-1
2003
Textiles. Methods for the determination of certain aromatic amines derived from azo colorants. Detection of the use of certain azo colorants accessible without extraction
BS EN 14362-2
2003
Textiles. Methods for the determination of certain aromatic amines derived from azo colorants. Detection of the use of certain azo colorants accessible by extracting the fibres
BS EN 14368
2003
Products used for treatment of water intended for human consumption. Manganese dioxide coated limestone
BS EN 14369
2003
Products used for treatment of water intended for human consumption. Iron-coated granular activated alumina
BS EN 14382
2002
Safety devices for gas pressure regulating stations and installations. Gas safety shut-off devices for operating pressure up to 100 bar
BS EN 14387
2004
Respiratory protective devices. Gas filter(s) and combined filter(s). Requirements, testing, marking
BS EN 14396
2004
Fixed ladders for manholes
BS EN 14398-1
2003
Cryogenic vessels. Large transportable non-vacuum insulated vessels. Fundamental requirements
BS EN 14398-2
2003
Cryogenic vessels. Large transportable non-vacuum insulated vessels. Design, fabrication, inspection and testing
BS EN 14398-3
2003
Cryogenic vessels. Large transportable non-vacuum insulated vessels. Operational requirements
BS EN 14410
2003
Self adhesive tapes. Measurement of breaking strength and elongation at break
BS EN 14413-1
2004
Recreational diving services. Safety related minimum requirements for the training of scuba instructors. Level 1
BS EN 14413-2
2004
Recreational diving services. Safety related minimum requirements for the training of scuba instructors. Level 2
BS EN 14419
2003
District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Surveillance systems
BS EN 14465
2003
Textiles. Upholstery fabrics. Specification and methods of test
BS EN 14467
2004
Recreational diving services. Requirements for recreational scuba diving service providers
BS EN 14484
2003
Health informatics. International transfer of personal health data covered by the EU data protection directive. High level security policy
BS EN 14485
2003
Health informatics. Guidance for handling personal health data in international applications in the context of the EU data protection directive
BS EN 14493
2002
Structural adhesives. Determination of dynamic resistance to cleavage of high strength adhesive bonds under impact conditions. Wedge impact method
BS EN 14503
2003
Inland navigation vessels. Harbours for inland navigation
BS EN 14504
2004
Inland navigation vessels. Floating landing stages. Requirements, tests
BS EN 14508
2003
Postal services. Quality of service. Measurement of the transit time of end-to-end services for single piece non-priority mail and second class mail
BS EN 14533
2003
Textiles and textile products. Burning behaviour of bedding items. Classification scheme
BS EN 14534
2003
Postal services. Quality of service. Measurement of the transit time of end-to-end services for bulk mail
BS EN 14612
2003
Space product assurance. Verification and approval of automatic machine wave soldering
BS EN 14725
2003
Space engineering. Verification
BS EN 14824
2003
Space engineering. Testing
BS EN 20105-A02
1993
Textiles. Tests for colour fastness. Grey scale for assessing change in colour
BS EN 20105-A03
1993
Textiles. Tests for colour fastness. Grey scale for assessing staining
BS EN 20105-C01
1993
Textiles. Tests for colour fastness. Colour fastness to washing: Test 1
BS EN 20105-C02
1993
Textiles. Tests for colour fastness. Colour fastness to washing: Test 2
BS EN 20105-C03
1993
Textiles. Tests for colour fastness. Colour fastness to washing: Test 3
BS EN 20105-C04
1993
Textiles. Tests for colour fastness. Colour fastness to washing: Test 4
BS EN 20105-C05
1993
Textiles. Tests for colour fastness. Colour fastness to washing: Test 5
BS EN 20105-C06
1993
Textiles. Tests for colour fastness. Colour fastness to domestic and commercial laundering
BS EN 20105-N01
1995
Textiles. Tests for colour fastness. Colour fastness to bleaching: hypochlorite
BS EN 20139
1992
Textiles. Standard atmospheres for conditioning and testing
BS EN 20140-2
1993
Determination, verification and application of precision data
BS EN 20140-10
1992
Acoustics. Measurement of sound insulation in buildings and of building elements. Laboratory measurement of airborne sound insulation of small building elements
BS EN 20187
1993
Paper, board and pulps. Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples
BS EN 20225
1992
Fasteners. Bolts, screws, studs and nuts. Symbols and designations of dimensions
BS EN 20273
1992
Fasteners. Clearance holes for bolts and screws
BS EN 20284
1993
Conveyor belts. Electrical conductivity. Specification and method of test
BS EN 20286-2
1993
ISO system of limits and fits. ISO system of limits and fits. Tables of standard tolerance grades and limit deviations for holes and shafts
BS EN 20340
1993
Conveyor belts. Flame retardation. Specifications and test method
BS EN 20354
1993
Acoustics. Measurement of sound absorption in a reverberation room
BS EN 20534
1994
Method for determination of thickness and apparent bulk density or apparent sheet density of paper and board
BS EN 20594-1
1994
Conical fittings with a 6% (Luer) taper for syringes, needles and certain other medical equipment. General requirements
BS EN 20693
1992
Dimensions of seam welding wheel blanks
BS EN 20811
1992
Textiles. Determination of resistance to water penetration. Hydrostatic pressure test
BS EN 20865
1992
Slots in platens for projection welding machines
BS EN 20898-7
1995
Mechanical properties of fasteners. Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
BS EN 20898-2
1994
Mechanical properties of fasteners. Nuts with specified proof load values. Coarse thread
BS EN 21089
1992
Electrode taper fits for spot welding equipment. Dimensions
BS EN 21512
1994
Methods of test for paints. Sampling
BS EN 21539
1992
Information technology. Programming languages. FORTRAN
BS EN 21559
1992
Specification for alloys for dental amalgam
BS EN 21683
1994
Acoustics. Preferred reference quantities for acoustic levels
BS EN 21746
1993
Rubber or plastics hoses and tubing. Bending tests
BS EN 21864
1994
Information technology. Unrecorded 12,7 mm (0,5 in) wide magnetic tape for information interchange. 32 ftpmm (800 ftpi) NRZ1, 126 ftpmm (3 200 ftpi) phase encoded and 356 ftpmm (9 042 ftpi) NRZ1
BS EN 21942-1
1992
Dental vocabulary. General and clinical terms
BS EN 21942-2
1993
Dental vocabulary. Dental materials
BS EN 21942-3
1994
Dental vocabulary. Dental instruments
BS EN 21942-4
1994
Dental vocabulary. Dental equipment
BS EN 22063
1994
Metallic and other inorganic coatings. Thermal spraying. Zinc, aluminium and their alloys
BS EN 22206
1993
Complete, filled transport packages. Method for identifying parts when testing
BS EN 22234
1993
Complete, filled transport packages. Methods of test for stacking using static load
BS EN 22244
1993
Complete, filled transport packages. Method for determination of resistance to horizontal impact
BS EN 22247
1993
Complete, filled transport packages. Method for determination of resistance to fixed low frequency vibration
BS EN 22248
1993
Complete, filled transport packages. Method for determination of resistance to vertical impact by dropping
BS EN 22286
1994
Methods for the determination of length and width of a roll, net mass and mean mass per unit area of a piece, cut, roll or sample and the determination of thickness for coated fabrics
BS EN 22313
1992
Textile fabrics. Determination of the recovery from creasing of a horizontally folded specimen by measuring the angle of recovery
BS EN 22339
1992
Taper pins, unhardened
BS EN 22340
1992
Clevis pins without head
BS EN 22341
1992
Clevis pins with head
BS EN 22401
1994
Covered electrodes. Determination of the efficiency, metal recovery and deposition coefficient
BS EN 22553
1995
Welded, brazed and soldered joints. Symbolic representation on drawings
BS EN 22768-1
1993
General tolerances. Tolerances for linear and angular dimensions without individual tolerance indications
BS EN 22768-2
1993
General tolerances. Geometrical tolerances for features without individual tolerance indications
BS EN 22858
1993
End-suction centrifugal pumps (rating 16 bar). Designation, nominal duty point and dimensions
BS EN 22872
1993
Complete, filled transport packages. Method for determination of resistance to compression
BS EN 22874
1993
Complete, filled transport packages. Method of test for stacking using compression tester
BS EN 22876
1993
Complete, filled transport packages. Method for determination of resistance to damage by rolling
BS EN 22922
1993
Acoustics. Measurement of noise emitted by vessels on inland water-ways and harbours
BS EN 23035
1994
Single-faced and single-wall corrugated fibreboard. Determination of flat crush resistance
BS EN 23270
1991
Specification for temperatures and humidities for conditioning and testing paints, varnishes and their raw materials
BS EN 23312
1993
Sintered metal materials and hardmetals. Determination of Young modulus
BS EN 23326
1993
Specification for hardmetals. Determination of (the magnetization) coercivity
BS EN 23327
1993
Hardmetals. Determination of transverse rupture strength
BS EN 23369
1993
Impermeable sintered metal materials and hardmetals. Determination of density
BS EN 23661
1993
End-suction centrifugal pumps. Baseplate and installation dimensions
BS EN 23758
1994
Textiles. Care labelling code using symbols
BS EN 23878
1993
Hardmetals. Vickers hardness test
BS EN 23907
1993
Hardmetals. Determination of total carbon content. Gravimetric method
BS EN 23908
1993
Hardmetals. Determination of insoluble (free) carbon content. Gravimetric method
BS EN 23909
1994
Hardmetals. Determination of cobalt. Potentiometric method
BS EN 23923-1
1993
Metallic powders. Determination of apparent density. Funnel method
BS EN 23923-2
1993
Metallic powders. Determination of apparent density. Scott volumeter method
BS EN 23927
1993
Specification for metallic powders, excluding powders for hardmetals. Determination of compactibility (compressibility) in uniaxial compression
BS EN 23954
1993
Powders for powder metallurgical purposes. Sampling
BS EN 23994
1993
Plastics products. Hose of polymer reinforced thermoplastics for suction and discharge
BS EN 23995
1993
Specification for metallic powders. Determination of green strength by transverse rupture of rectangular compacts
BS EN 24003
1993
Permeable sintered metal materials. Determination of bubble test pore size
BS EN 24006
1993
Measurement of fluid flow in closed conduits. Vocabulary and symbols
BS EN 24014
1992
Hexagon head bolts. Product grades A and B
BS EN 24015
1992
Hexagon head bolts. Product grade B. Reduced shank (shank diameter pitch diameter)
BS EN 24016
1992
Hexagon head bolts. Product grade C
BS EN 24017
1992
Hexagon head screws. Product grades A and B
BS EN 24018
1992
Hexagon head screws. Product grade C
BS EN 24032
1992
Hexagon nuts, style 1. Product grades A and B
BS EN 24033
1992
Hexagon nuts, style 2. Product grades A and B
BS EN 24034
1992
Hexagon nuts. Product grade C
BS EN 24035
1992
Hexagon thin nuts (chamfered). Product grades A and B
BS EN 24036
1992
Hexagon thin nuts. Product grade B (unchamfered)
BS EN 24165
1992
Road vehicles. Electrical connections. Double-pole connector
BS EN 24185
1995
Measurement of fluid flow in closed conduits. Weighing method
BS EN 24217
1994
Codes for the representation of currencies and funds
BS EN 24489
1993
Sintered hardmetals. Sampling and testing
BS EN 24491-1
1993
Metallic powders. Determination of oxygen content by reduction methods. General guidelines
BS EN 24491-2
1993
Metallic powders. Determination of oxygen content by reduction methods. Loss of mass on hydrogen reduction (hydrogen loss)
BS EN 24492
1993
Metallic powders, excluding powders for hardmetals. Determination of dimensional changes associated with compacting and sintering
BS EN 24496
1993
Metallic powders. Determination of acid insoluble content in iron, copper, tin and bronze powders
BS EN 24497
1993
Metallic powders. Determination of particle size by dry sieving
BS EN 24498-1
1993
Sintered metal materials, exluding hardmetals. Determination of apparent hardness. Materials of essentially uniform section hardness
BS EN 24499
1993
Specification for hardmetals. Metallographic determination of microstructure
BS EN 24501
1994
Hardmetals. Determination of titanium. Photometric peroxide method
BS EN 24503
1993
Hardmetals. Determination of contents of metallic elements by X-ray fluorescence. Fusion method
BS EN 24505
1993
Specification for hardmetals. Metallographic determination of porosity and uncombined carbon
BS EN 24506
1993
Specification for hardmetals. Compression test
BS EN 24624
1993
Paints and varnishes. Pull-off test
BS EN 24641
1993
Rubber hoses for water suction and discharge. Specification
BS EN 24671
1993
Rubber and plastics hose and hose assemblies. Methods of measurement of dimensions
BS EN 24766
1992
Slotted set screws with flat point
BS EN 24823
1994
Dental elastic impression material. Specification for elastomeric impression materials
BS EN 24869-1
1993
Acoustics. Hearing protectors. Sound attenuation of hearing protectors. Subjective method of measurement
BS EN 24869-3
1994
Acoustics. Hearing protectors. Simplified method for the measurement of insertion loss of ear-muff type protectors for quality inspection purposes
BS EN 24883
1993
Specification for hardmetals. Determination of contents of metallic elements by X-ray fluorescence. Solution method
BS EN 24884
1993
Hardmetals. Sampling and testing of powders using sintered test pieces
BS EN 24937
1991
Steel and iron. Determination of chromium content. Potentiometric or visual titration method
BS EN 25077
1994
Textiles. Determination of dimensional change in washing and drying
BS EN 25136
1994
Acoustics. Determination of sound power radiated into a duct by fans. In-duct method
BS EN 25184
1995
Straight resistance spot welding electrodes
BS EN 25199
1992
Technical specifications for centrifugal pumps. Class II
BS EN 25264-3
1994
Pulps. Laboratory beating. Jokro mill method
BS EN 25580
1992
Specification for minimum requirements for industrial radiographic illuminators for non-destructive testing
BS EN 25663
1993
Water quality. Determination of Kjeldahl nitrogen. Method after mineralization with selenium
BS EN 25667-1
1994
Water quality. Sampling. Guidance on the design of sampling programmes
BS EN 25667-2
1993
Water quality. Sampling. Guidance on sampling techniques
BS EN 25754
1993
Sintered metal materials, excluding hardmetals. Unnotched impact test piece
BS EN 25813
1993
Water quality. Determination of dissolved oxygen. Iodometric method
BS EN 25814
1992
Method for determination of dissolved oxygen in water: electrochemical probe method
BS EN 25817
1992
Arc-welded joints in steel. Guidance on quality levels for imperfections
BS EN 25821
1992
Resistance spot welding electrode caps
BS EN 25822
1992
Spot welding equipment. Taper plug gauges and taper ring gauges
BS EN 25827
1992
Specification for spot welding. Electrode back-ups and clamps
BS EN 25923
1994
Fire extinguishing media. Carbon dioxide
BS EN 25978
1993
Rubber- or plastics-coated fabrics. Determination of blocking resistance
BS EN 26157-1
1992
Fasteners. Surface discontinuities. Bolts, screws and studs for general requirements
BS EN 26157-3
1992
Fasteners. Surface discontinuities. Bolts, screws and studs for special requirements
BS EN 26330
1994
Textiles. Domestic washing and drying procedures for textile testing
BS EN 26360-2
1998
Dentistry. Dental rotary instruments. Number coding system. Shape and specific characteristics
BS EN 26461-1
1993
Water quality. Detection and enumeration of the spores of sulfite-reducing anaerobes (Clostridia). Method by enrichment in a liquid medium
BS EN 26461-2
1993
Water quality. Detection and enumeration of the spores of sulfite-reducing anaerobes (Clostridia). Method by membrane filtration
BS EN 26501
1992
Ferronickel. Specification and delivery requirements
BS EN 26553
1991
Specification for marking of automatic steam traps
BS EN 26554
1991
Specification for face-to-face dimensions for flanged automatic steam traps
BS EN 26590-1
1993
Packaging. Sacks. Vocabulary and types. Paper sacks
BS EN 26590-2
1993
Packaging. Sacks. Vocabulary and types. Sacks made from thermoplastic flexible film
BS EN 26591-1
1993
Packaging. Sacks. Description and method of measurement. Empty paper sacks
BS EN 26591-2
1993
Packaging. Sacks. Description and method of measurement. Empty sacks made from thermoplastic flexible film
BS EN 26595
1993
Water quality. Determination of total arsenic. Silver diethyldithiocarbamate spectrophotometric method
BS EN 26599-1
1993
Packaging. Sacks. Conditioning for testing. Paper sacks
BS EN 26704
1991
Classification of automatic steam traps
BS EN 26777
1993
Water quality. Physical, chemical and biochemical methods. Determination of nitrite: molecular absorption spectrometric method
BS EN 26789
1994
Assembly tools for screws and nuts. Hand torque tools. Requirements and test methods
BS EN 26801
1993
Rubber or plastics hoses. Determination of volumetric expansion
BS EN 26802
1993
Rubber and plastics hoses and hose assemblies. Wire reinforced. Hydraulic impulse test with flexing
BS EN 26847
1994
Covered electrodes for manual metal arc welding. Deposition of a weld metal pad for chemical analysis
BS EN 26848
1991
Specification for tungsten electrodes for inert gas shielded arc welding and for plasma cutting and welding
BS EN 26891
1991
Timber structures. Joints made with mechanical fasteners. General principles for the determination of strength and deformation characteristics
BS EN 26922
1993
Adhesives. Determination of tensile strength of butt joints
BS EN 26927
1991
Building construction. Jointing products. Sealants. Vocabulary
BS EN 26948
1991
Specification for production and performance characteristic tests for automatic steam traps
BS EN 27023
1993
Packaging. Sacks. Method of sampling empty sacks for testing
BS EN 27185
1992
Information technology. Programming languages. Pascal
BS EN 27201-1
1994
Fire protection. Fire extinguishing media. Halogenated hydrocarbons. Specifications for halon 1211 and halon 1301
BS EN 27201-2
1994
Fire protection. Fire extinguishing media. Halogenated hydrocarbons. Code of practice for safe handling and transfer procedures
BS EN 27243
1994
Hot environments. Estimation of the heat stress on working man, based on the WBGT-index (wet bulb globe temperature)
BS EN 27286
1992
Graphical symbols for resistance welding equipment
BS EN 27326
1993
Rubber and plastics hoses. Assessment of ozone resistance under static conditions
BS EN 27372
1992
Trade data interchange. Trade data elements directory
BS EN 27389
1991
Building construction. Jointing products. Determination of elastic recovery
BS EN 27390
1991
Building construction. Jointing products. Determination of resistance to flow
BS EN 27418
1994
Leisure accommodation vehicles. Vocabulary
BS EN 27434
1992
Slotted set screws with cone point
BS EN 27435
1992
Slotted set screws with long dog point
BS EN 27436
1992
Slotted set screws with cup point
BS EN 27493
1991
Specification for dental operator's stool
BS EN 27627-1
1993
Hardmetals. Chemical analysis by flame atomic absorption spectrometry. General requirements
BS EN 27627-2
1993
Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Determination of calcium, potassium, magnesium and sodium in contents from 0,001 to 0,02 % (m/m)
BS EN 27627-3
1993
Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Determination of cobalt, iron, manganese and nickel in contents from 0,01 to 0,5 % (m/m)
BS EN 27627-4
1993
Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Determination of molybdenum, titanium and vanadium in contents from 0,01 to 0,5 % (m/m)
BS EN 27627-5
1993
Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Determination of cobalt, iron, manganese, molybdenum, nickel, titanium and vanadium in contents from 0,5 to 2 % (m/m)
BS EN 27627-6
1993
Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Determination of chromium in contents 0,01 to 2 % (m/m)
BS EN 27721
1992
Countersunk head screws. Head configuration and gauging
BS EN 27726
1994
Thermal environments. Instruments and methods for measuring physical quantities
BS EN 27740
1992
Specification for dimensions of surgical scalpels with detatchable blades
BS EN 27786
1992
Specification for dental rotary instruments. Laboratory abrasive instruments
BS EN 27787-3
1994
Specification for dental rotary instruments. Cutters. Carbide laboratory cutters for milling machines
BS EN 27810
1991
Guide to design, construction and use of identification cards
BS EN 27841
1991
Methods for determination of steam loss of automatic steam traps
BS EN 27842
1991
Methods for determination of discharge capacity of automatic steam traps
BS EN 27888
1993
Water quality. Method for the determination of electrical conductivity
BS EN 27931
1992
Specification for insulation caps and bushes for resistance welding equipment
BS EN 27942
1994
Information processing systems. Computer graphics. Graphical Kernel Systems (GKS) functional description
BS EN 27963
1992
Specification for calibration block No. 2 for ultrasonic examination of welds
BS EN 27965-1
1993
Packaging. Sacks. Drop test. Paper sacks
BS EN 28028
1993
Rubber and/or plastics hose assemblies for airless paint spraying. Specification
BS EN 28033
1993
Rubber and plastics hose. Determination of adhesion between components
BS EN 28049
1992
Ferronickel shot. Sampling for analysis
BS EN 28050
1992
Ferronickel ingots or pieces. Sampling for analysis
BS EN 28073
1994
Information technology. Telecommunications and information exchange between systems. Open Systems Interconnection. Protocol for providing the connection-mode transport service
BS EN 28094
1994
Steel cord conveyor belts. Adhesion strength test of the cover to the core layer
BS EN 28167
1992
Specification for projections for resistance welding
BS EN 28187
1992
Household refrigerating appliances. Refrigerator-freezers. Characteristics and test methods
BS EN 28206
1992
Acceptance tests for oxygen cutting machines. Reproducible accuracy. Operational characteristics
BS EN 28233
1992
Thermoplastics valves. Torque. Test method
BS EN 28265
1994
Water quality. Biological methods. Methods of biological sampling: guidance on the design and use of quantitative samplers for benthic macro-invertebrates on stony substrata in shallow freshwater
BS EN 28317
1993
Child-resistant packaging. Requirements and testing procedures for reclosable packages
BS EN 28318
1993
Complete, filled transport packages. Methods for determination of resistance to sinusoidal variable frequency vibration
BS EN 28339
1991
Building construction. Jointing products. Sealants. Determination of tensile properties
BS EN 28340
1991
Building construction. Jointing products. Sealants. Determination of tensile properties at maintained extension
BS EN 28362-1
1993
Injection containers for injectables and accessories. Injection vials made of glass tubing
BS EN 28362-2
1993
Injection containers for injectables and accessories. Closures for injection vials
BS EN 28362-3
1993
Injection containers for injectables and accessories. Aluminium caps for injection vials
BS EN 28362-4
1993
Injection containers for injectables and accessories. Injection vials made of moulded glass
BS EN 28394
1991
Building construction. Jointing products. Determination of extrudability of one-component sealants
BS EN 28430-1
1992
Specification for resistance spot welding. Electrode holders. Taper fixing 1:10
BS EN 28430-2
1992
Specification for resistance spot welding. Electrode holders. Morse taper fixing
BS EN 28430-3
1992
Specification for resistance spot welding. Electrode holders. Parallel shank fixing for end thrust
BS EN 28474
1993
Complete, filled transport packages. Method for determination of resistance to immersion in water
BS EN 28485
1994
Specification for programming language: APL
BS EN 28510-1
1993
Adhesives. Peel test for a flexible-bonded-to-rigid test specimen assembly. Adhesives. Peel test for a flexible-bonded-to-rigid test specimen assembly. 90° Peel
BS EN 28510-2
1993
Adhesives. Peel test for a flexible-bonded-to-rigid test specimen assembly. Adhesives. Peel test for a flexible-bonded to-rigid test specimen assembly. 180° Peel
BS EN 28601
1992
Specification for representation of dates and times in information interchange
BS EN 28630-1
1992
Guide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data interchange, using modified frequency modulation recording at 13 262 ftprad, on 80 tracks each side. Dimensional, physical and magnetic characteristics
BS EN 28630-2
1992
Guide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data interchange, using modified frequency modulation recording at 13 262 ftprad, on 80 tracks each side. Track format A for 77 tracks
BS EN 28630-3
1992
Guide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data interchange, using modified frequency modulation recording at 13 262 ftprad, on 80 tracks each side. Track format B for 80 tracks
BS EN 28653
1993
Jewellery. Ring-sizes. Definition, measurement and designation
BS EN 28654
1993
Colours of gold alloys. Definition, range of colours and designation
BS EN 28659
1992
Thermoplastics valves. Fatigue strength. Test method
BS EN 28662-1
1993
Hand-held portable power tools. Measurement of vibrations at the handle. General
BS EN 28662-2
1995
Hand-held portable power tools. Measurement of vibrations at the handle. Chipping hammers and riveting hammers
BS EN 28662-3
1995
Hand-held portable power tools. Measurement of vibrations at the handle. Rock drills and rotary hammers
BS EN 28662-5
1995
Hand-held portable power tools. Measurement of vibrations at the handle. Pavement breakers and hammers for construction work
BS EN 28673
1992
Hexagon nuts, style 1, with metric fine pitch thread. Product grades A and B
BS EN 28674
1992
Hexagon nuts, style 2, with metric fine pitch thread. Product grades A and B
BS EN 28675
1992
Hexagon thin nuts with metric fine pitch thread. Product grades A and B
BS EN 28676
1992
Hexagon head screws with metric fine pitch thread. Product grades A and B
BS EN 28692
1993
Water quality. Biological methods. Fresh water algal gStandardth inhibition test with Scenedesmus subspicatus and Selenastrum capricornutum
BS EN 28736
1992
Taper pins with internal thread, unhardened
BS EN 28737
1992
Taper pins with external thread, unhardened
BS EN 28738
1992
Plain washers for clevis pins. Product grade A
BS EN 28749
1992
Pins and grooved pins. Shear test
BS EN 28765
1992
Hexagon head bolts with metric fine pitch thread. Product grades A and B
BS EN 28768
1993
Complete, filled transport packages. Method for determination of resistance to damage by toppling
BS EN 28805
1992
Specification for a set of functions for computer graphics programming: Graphical Kernel System for Three Dimensions (GKS-3D)
BS EN 28839
1992
Mechanical properties of fasteners. Bolts, screws, studs and nuts made of non-ferrous metals
BS EN 28846
1993
Small craft. Electrical devices. Protection against ignition of surrounding flammable gases
BS EN 28848
1993
Small craft. Remote steering systems
BS EN 28849
1993
Small craft. Electrically operated bilge-pumps
BS EN 28872
1993
Aluminium caps for transfusion, infusion and injection bottles. General requirements and test methods
BS EN 28877
1994
Information technology. Telecommunications and information exchange between systems. Interface connector and contact assignments for ISDN Basic Access Interface located at reference points S and T
BS EN 28960
1993
Refrigerators, frozen food storage cabinets and food freezers for household and similar use. Measurement of emission of airborne acoustical noise
BS EN 28970
1991
Timber structures. Testing of joints made with mechanical fasteners. Requirements for wood density
BS EN 28996
1994
Ergonomics. Determination of metabolic heat production
BS EN 29008
1994
Glass bottles. Verticality. Test method
BS EN 29009
1994
Glass containers. Height and non-parallelism of finish with reference to container base. Test methods
BS EN 29046
1991
Building construction. Sealants. Determination of adhesion/cohesion properties at constant temperature
BS EN 29048
1991
Building construction. Jointing products. Determination of extrudability of sealants using standardized apparatus
BS EN 29052-1
1992
Acoustics. Method for the determination of dynamic stiffness. Materials used under floating floors in dwellings
BS EN 29053
1993
Acoustics. Materials for acoustical applications. Determination of airflow resistance
BS EN 29070
1993
Information technology. SGML support facilities. Registration procedures for public text owner identifiers
BS EN 29090
1992
Specification for gas tightness of equipment for gas welding and allied processes
BS EN 29092
1992
Textiles. Nonwovens. Definition
BS EN 29117
1992
Methods of test for paints. Tests associated with paint film formation. Paints and varnishes. Determination of through-dry state and through-dry time. Method of test
BS EN 29142
1993
Adhesives. Guide to the selection of standard laboratory ageing conditions for testing bonded joints
BS EN 29168
1994
Dental handpieces. Hose connectors
BS EN 29171-1
1993
Information technology. 130 mm optical disk cartridge, write once, for information interchange. Unrecorded optical disk cartridge
BS EN 29171-2
1993
Information technology. 130 mm optical disk cartridge, write once, for information interchange. Recording format
BS EN 29202
1993
Jewellery. Fineness of precious metal alloys
BS EN 29241-2
1993
Ergonomic requirements for office work with visual display terminals (VDTs). Guidance on task requirements
BS EN 29241-3
1993
Ergonomic requirements for office work with visual display terminals (VDTs). Visual display requirements
BS EN 29313
1992
Specification for resistance spot welding equipment. Cooling tubes
BS EN 29333
1992
Specification for dental brazing materials
BS EN 29367-1
1994
Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships. General requirements. Commercial vehicles and combinations of vehicles, semi-trailers excluded
BS EN 29367-2
1995
Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships. General requirements. Semi-trailers
BS EN 29439
1993
Water quality. Evaluation in an aqueous medium of the "ultimate" aerobic biodegradability of organic compounds: method by analysis of released carbon dioxide
BS EN 29453
1994
Soft solder alloys. Chemical compositions and forms
BS EN 29454-1
1994
Soft soldering fluxes. Classification and requirements. Classification, labelling and packaging
BS EN 29455-1
1994
Soft soldering fluxes. Test methods. Determination of non-volatile matter, gravimetric method
BS EN 29455-5
1993
Soft soldering fluxes. Test methods. Copper mirror test
BS EN 29455-8
1993
Soft soldering fluxes. Test methods. Determination of zinc content
BS EN 29455-11
1993
Soft soldering fluxes. Test methods. Solubility of flux residues
BS EN 29455-14
1993
Soft soldering fluxes. Test methods. Assessment of tackiness of flux residues
BS EN 29506
1995
Industrial automation systems. Manufacturing message specification
BS EN 29519
1994
Shipbuilding and marine structures. Rungs for dog-step ladders
BS EN 29539
1992
Specification for materials for equipment used in gas welding, cutting and allied processes
BS EN 29653
1994
Adhesives. Test method for shear impact strength of adhesive bonds
BS EN 29692
1994
Specification for metal-arc welding with covered electrode, gas-shielded metal-arc welding and gas welding. Joint preparations for steel
BS EN 29735
1992
Electronic data interchange for administration, commerce and transport (EDIFACT). Application level syntax rules
BS EN 29775
1993
Small craft. Remote steering systems for single outboard motors of 15 kW to 40 kW power
BS EN 29865
1993
Textiles. Determination of water repellency of fabrics by the Bundesmann rain-shower test
BS EN 29885
1994
Wide-mouth glass containers. Deviation from flatness of top sealing surface. Test methods
BS EN 29917
1994
Specification for dental water-based cements
BS EN 30042
1994
Arc-welded joints in aluminium and its weldable alloys. Guidance on quality levels for imperfections
BS EN 30139-1
1994
Dentistry. Resilient lining materials for removable dentures. Specification for short-term materials
BS EN 30326-1
1994
Mechanical vibration. Laboratory method for evaluating vehicle seat vibration. Basic requirements
BS EN 30993-3
1994
Biological evaluation of medical devices. Tests for genotoxicity, carcinogenicity and reproductive toxicity
BS EN 30993-4
1994
Biological evaluation of medical devices. Selection of tests for interactions with blood
BS EN 30993-6
1995
Biological evaluation of medical devices. Tests for local effects after implantation
BS EN 31092
1994
Textiles. Determination of physiological properties. Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test)
BS EN 31252
1996
Lasers and laser related equipment. Laser device. Minimum requirements for documentation
BS EN 31253
1996
Lasers and laser-related equipment. Laser device. Mechanical interfaces
BS EN 31427
1994
Determination of silver in silver jewellery alloys. Volumetric (potentiometric) method using potassium bromide
BS EN 41003
1999
Particular safety requirements for equipment to be connected to telecommunications networks
BS EN 45003
1995
Calibration and testing laboratory accreditation systems. General requirements for operation and recognition
BS EN 45004
1995
General criteria for the operation of various types of bodies performing inspection
BS EN 45010
1998
General requirements for assessment and accreditation of certification systems
BS EN 45011
1998
General requirements for bodies operating product certification systems
BS EN 45012
1998
General requirements for bodies operating assessment and certification/registration of quality systems
BS EN 45020
1998
Standardization and related activities. General vocabulary
BS EN 45501
1994
Specification for metrological aspects of non-automatic weighing instruments
BS EN 45502-1
1998
Active implantable medical devices. General requirements for safety, marking and information to be provided by the manufacturer
BS EN 45502-2-1
2003
Active implantable medical devices. Particular requirements for active implantable medical devices intended to treat bradyarrhythmia (cardiac pacemakers)
BS EN 45503
1996
Attestation standard for the assessment of contract award procedures of entities operating in the water, energy, transport and telecommunication sectors
BS EN 45510-7-2
2000
Guide for the procurement of power station equipment. Pipework and valves. Boiler and high pressure valves
BS EN 45510-8-1
1998
Guide for the procurement of power station equipment. Control and instrumentation
BS EN 45510-1
1998
Guide for the procurement of power station equipment. Common clauses
BS EN 45510-2-2
1999
Guide for the procurement of power station equipment. Electrical equipment. Uninterruptible power supplies
BS EN 45510-2-3
2000
Guide for the procurement of power station equipment. Electrical equipment. Stationary batteries and chargers
BS EN 45510-2-4
2000
Guide for the procurement of power station equipment. Electrical equipment. High power static convertors
BS EN 45510-2-5
2002
Guide for the procurement of power station equipment. Electrical equipment. Motors
BS EN 45510-2-6
2000
Guide for the procurement of power station equipment. Electrical equipment. Generators
BS EN 45510-3-1
2000
Guide for the procurement of power station equipment. Boilers. Water tube boilers
BS EN 45510-3-2
2000
Guide for the procurement of power station equipment. Boilers. Shell boilers
BS EN 45510-3-3
2000
Guide for the procurement of power station equipment. Boilers. Boilers with fluidized bed firing
BS EN 45510-4-1
1999
Guide for the procurement of power station equipment. Boiler auxiliaries. Equipment for reduction of dust emissions
BS EN 45510-4-2
1999
Guide for the procurement of power station equipment. Boiler auxiliaries. Gas-air, steam-air and gas-gas heaters
BS EN 45510-4-3
1999
Guide for the procurement of power station equipment. Boiler auxiliaries. Draught plant
BS EN 45510-4-4
2002
Guide for the procurement of power station equipment. Boiler auxiliaries. Fuel preparation equipment
BS EN 45510-4-5
2002
Guide for the procurement of power station equipment. Boiler auxiliaries. Coal handling and bulk storage plant
BS EN 45510-4-6
1999
Guide for the procurement of power station equipment. Boiler auxiliaries. Flue gas desulfurization (De-SOx) plant
BS EN 45510-4-7
1999
Guide for the procurement of power station equipment. Boiler auxiliaries. Ash handling plant
BS EN 45510-4-8
2000
Guide for the procurement of power station equipment. Boiler auxiliaries. Dust handling plant
BS EN 45510-4-9
2000
Guide for the procurement of power station equipment. Boiler auxiliaries. Sootblowers
BS EN 45510-4-10
2000
Guide for the procurement of power station equipment. Boiler auxiliaries. Flue gas denitrification (De-NOx) plant
BS EN 45510-5-1
1998
Guide for the procurement of power station equipment. Steam turbines
BS EN 45510-5-2
1998
Guide for the procurement of power station equipment. Gas turbines
BS EN 45510-5-3
1998
Guide for the procurement of power station equipment. Wind turbines
BS EN 45510-5-4
1998
Guide for the procurement of power station equipment. Hydraulic turbines, storage pumps and pump-turbines
BS EN 45510-6-1
1998
Guide for the procurement of power station equipment. Turbine auxiliaries. Deaerators
BS EN 45510-6-2
1998
Guide for the procurement of power station equipment. Turbine auxiliaries. Feedwater heaters
BS EN 45510-6-3
1998
Guide for the procurement of power station equipment. Turbine auxiliaries. Condenser plant
BS EN 45510-6-4
2000
Guide for the procurement of power station equipment. Turbine auxiliaries. Pumps
BS EN 45510-6-5
2000
Guide for the procurement of power station equipment. Turbine auxiliaries. Dry cooling systems
BS EN 45510-6-6
2000
Guide for the procurement of power station equipment. Turbine auxiliaries. Turbine auxiliaries. Wet and wet/dry cooling towers
BS EN 45510-6-7
1998
Guide for the procurement of power station equipment. Turbine auxiliaries. Moisture separator reheaters
BS EN 45510-6-8
2000
Guide for the procurement of power station equipment. Turbine auxiliaries. Cranes
BS EN 45510-6-9
2000
Guide for the procurement of power station equipment. Turbine auxiliaries. Cooling water systems
BS EN 45510-7-1
2000
Guide for the procurement of power station equipment. Pipework and valves. High pressure piping systems
BS EN 45544-1
2000
Workplace atmospheres. Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours. General requirements and test methods
BS EN 45544-2
2000
Workplace atmospheres. Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours. Performance requirements for apparatus used for measuring concentrations in the region of limit values
BS EN 45544-3
2000
Workplace atmospheres. Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours. Performance requirements for apparatus used for measuring concentrations well above limit values
BS EN 45544-4
2000
Workplace atmospheres. Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours. Guide for selection, installation, use and maintenance
BS EN 46001
1997
Specification for application of EN ISO 9001 to the manufacture of medical devices
BS EN 46002
1997
Specification for application of EN ISO 9002 to the manufacture of medical devices
BS EN 46003
1999
Quality systems. Medical devices. Particular requirements for the application of EN ISO 9003
BS EN 50014
1998
Electrical apparatus for potentially explosive atmospheres. General requirements
BS EN 50015
1998
Electrical apparatus for potentially explosive atmospheres. Oil immersion "o"
BS EN 50016
2002
Electrical apparatus for potentially explosive atmospheres. Pressurized apparatus "p"
BS EN 50017
1998
Electrical apparatus for potentially explosive atmospheres. Powder filling "q"
BS EN 50018
2000
Electrical apparatus for potentially explosive atmospheres. Flameproof enclosure 'd'
BS EN 50018
2000
Electrical apparatus for potentially explosive atmospheres. Flameproof enclosure 'd'
BS EN 50019
2000
Electrical apparatus for potentially explosive atmospheres. Increased safety 'e'
BS EN 50020
2002
Electrical apparatus for potentially explosive atmospheres. Intrinsic safety 'i'
BS EN 50021
1999
Electrical apparatus for potentially explosive atmospheres. Type of protection "n"
BS EN 50033
1991
Specification for construction and testing of miners' caplamps in relation to the risk of explosion, for mines susceptible to firedamp
BS EN 50049-1
1998
Domestic and similar electronic equipment interconnection requirements. Peritelevision connector
BS EN 50050
2001
Electrical apparatus for potentially explosive atmospheres. Electrostatic hand-held spraying equipment
BS EN 50054
1999
Electrical apparatus for the detection and measurement of combustible gases. General requirements and test methods
BS EN 50055
1999
Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for Group I apparatus indicating up to 5 % (V/V) methane in air
BS EN 50057
1999
Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for Group II apparatus indicating up to 100% lower explosive limit
BS EN 50058
1999
Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for Group II apparatus indicating up to 100% (V/V) gas
BS EN 50059
1991
Specification for electrostatic hand-held spraying equipment for non-flammable material for painting and finishing
BS EN 50062
1992
Specification for ceramic pressurized hollow insulators for high-voltage switchgear and controlgear
BS EN 50065-1
2001
Specification for signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 kHz. General requirements, frequency bands and electromagnetic disturbances
BS EN 50065-2-2
2003
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 kHz. Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in industrial
BS EN 50065-2-3
2003
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 kHz. Immunity requirements for mains communications equipment and systems operating in the range of frequencies 3 kHz to 95 kHz and intended for use by electricity su
BS EN 50065-4-1
2002
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 kHz. Low voltage decoupling filters. Generic specification
BS EN 50065-4-2
2002
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 kHz. Low voltage decoupling filters. Safety requirements
BS EN 50065-4-2
2002
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 kHz. Low voltage decoupling filters. Safety requirements
BS EN 50065-4-4
2003
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 kHz. Low voltage decoupling filters. Impedance filter
BS EN 50065-4-5
2003
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 kHz. Low voltage decoupling filters. Segmentation filter
BS EN 50067
1998
Specification of the radio data system (RDS) for VHF/FM sound broadcasting in the frequency range from 87,5 to 108,0 MHz
BS EN 50068
1991
Specification for wrought steel enclosures for gas-filled high-voltage switchgear and controlgear
BS EN 50069
1991
Specification for welded composite enclosures of cast and wrought aluminium alloys for gas-filled high-voltage switchgear and controlgear
BS EN 50072
1992
Medical electrical equipment. Particular requirements for safety. Specification for peritoneal dialysis equipment
BS EN 50073
1999
Guide for selection, installation, use and maintenance of apparatus for the detection and measurement of combustible gases or oxygen
BS EN 50075
1991
Specification for flat non-wirable two-pole plugs 2.5 A 250 V, with cord, for the connection of class II-equipment for household and similar purposes
BS EN 50077
1993
Specification for low profile connectors (IS-1) for implantable pacemakers
BS EN 50078
1994
Torches and guns for arc welding
BS EN 50080
1991
Specification for RF characteristics of MAC AM-VSB cable receivers
BS EN 50081-2
1994
Electromagnetic compatibility. Generic emission standard. Industrial environment
BS EN 50081-1
1992
Electromagnetic compatibility. Generic emission standard. Residential, commercial and light industry
BS EN 50082-1
1998
Electromagnetic compatibility. Generic immunity standard. Residential, commercial and light industry
BS EN 50082-2
1995
Electromagnetic compatibility. Generic immunity standard. Industrial environment
BS EN 50083-2
2001
Cabled distribution systems for television and sound signals. Electromagnetic compatibility for equipment
BS EN 50083-3
2002
Cabled distribution systems for television and sound signals. Active wideband equipment for coaxial cable networks
BS EN 50083-4
1999
Cabled distribution systems for television and sound signals. Passive wideband equipment for coaxial cable networks
BS EN 50083-5
2002
Cabled distribution systems for television and sound signals. Headend equipment
BS EN 50083-6
1998
Cabled distribution systems for television and sound signals. Optical equipment
BS EN 50083-7
1997
Cabled distribution systems for television and sound signals. System performance
BS EN 50083-8
2002
Cabled distribution systems for television and sound signals. Electromagnetic compatibility for networks
BS EN 50083-9
2002
Cabled distribution systems for television and sound signals. Interfaces for CATV/SMATV headends and similar professional equipment for DVB/MPEG-2 transport streams
BS EN 50083-10
2002
Cabled distribution systems for television and sound signals. System performance for return paths
BS EN 50084
1992
Specification for safety of household and similar electrical appliances. Requirements for the connection of washing machines, dishwashers and tumbler dryers to the water mains
BS EN 50085-1
2005
Cable trunking and cable ducting systems for electrical installations. General requirements
BS EN 50085-2-3
2001
Cable trunking and cable ducting systems for electrical installations. Particular requirements for slotted cable trunking systems intended for installation in cabinets
BS EN 50086-1
1994
Specification for conduit systems for cable management. General requirements
BS EN 50086-2-1
1996
Specification for conduit systems for cable management. Particular requirements. Rigid conduit systems
BS EN 50086-2-2
1996
Specification for conduit systems for cable management. Particular requirements. Pliable conduit systems
BS EN 50086-2-4
1994
Specification for conduit systems for cable management. Particular requirements. Conduit systems buried underground
BS EN 50087
1993
Safety of household and similar electrical appliances. Particular requirements for bulk-milk coolers
BS EN 50088
1996
Safety of electric toys
BS EN 50088
1996
Safety of electric toys
BS EN 50089
1992
Specification for cast resin partitions for metal-enclosed gas-filled high-voltage switchgear and controlgear
BS EN 50090-2-1
1996
Home and Building Electronic Systems (HBES). System overview. Architecture
BS EN 50090-2-2
1997
Home and Building Electronic Systems (HBES). System overview. General technical requirements
BS EN 50090-3-1
1996
Home and Building Electronic Systems (HBES). Aspects of application. Introduction to the application structure
BS EN 50090-8
2001
Home and Building Electronic Systems (HBES). Conformity assessment of products
BS EN 50091-1-2
1999
Specification for uninterruptible power systems (UPS). General and safety requirements for UPS used in restricted access locations
BS EN 50091-2
1996
Specification for uninterruptible power systems (UPS). EMC requirements
BS EN 50094
1993
Access control system for the MAC/packet family: EUROCRYPT
BS EN 50098-1
1999
Customer premises cabling for information technology. ISDN basic access
BS EN 50098-2
1996
Customer premises cabling for information technology. 2048 kbit/s ISDN primary access and leased line network interface
BS EN 50103
1996
Guidance on the application of EN 29001 and EN 46001 and of EN 29002 and EN 46002 for the active (including active implantable) medical device industry
BS EN 50104
2002
Electrical apparatus for the detection and measurement of oxygen. Performance requirements and test methods
BS EN 50106
1997
Specification for safety of household and similar electrical appliances. Particular rules for routine tests referring to appliances under the scope of BS EN 60335-1 and BS EN 60967
BS EN 50107
1998
Signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV
BS EN 50107-1
2002
Signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV. General requirements
BS EN 50109-1
1996
Hand crimping tools. Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications. General requirements and tests
BS EN 50109-2-1
1996
Hand crimping tools. Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications. Particular requirements. Radio frequency connectors and concentric contacts. Open throat tools with fixed dies, sizes A t
BS EN 50109-2-2
1996
Hand crimping tools. Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications. Particular requirements. Radio frequency connectors and concentric contacts. Open throat tools with removable and interch
BS EN 50109-2-3
1996
Hand crimping tools. Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications. Particular requirements. Contacts of electrical connectors
BS EN 50109-2-4
1996
Hand crimping tools. Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications. Particular requirements. Centre contacts of RF connectors, series SMZ
BS EN 50109-2-5
1996
Hand crimping tools. Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications. Particular requirements. Termination of twin-ax cable for databus applications
BS EN 50110-1
1997
Operation of electrical installations. Minimum requirements
BS EN 50110-2
1997
Operation of electrical installations. National annexes
BS EN 50112
1996
Measurement, control, regulation. Electrical temperature sensors. Metal protecting tubes for TC assemblies
BS EN 50116
1996
Information technology equipment. Routine electrical safety testing in production
BS EN 50117-1
2002
Coaxial cables. Generic specification
BS EN 50117-3-1
2002
Coaxial cables. Sectional specifications for cables used in telecom applications. Miniaturized cables used in digital communication systems
BS EN 50117-4
1996
Coaxial cables used in cabled distribution networks. Sectional specification for distribution and trunk cables
BS EN 50117-5
1997
Coaxial cables used in cabled distribution networks. Sectional specification for indoor drop cables for use in networks operating at frequencies between 5 MHz and 2150 MHz
BS EN 50117-6
1997
Coaxial cables used in cabled distribution networks. Sectional specification for outdoor drop cables for use in networks operating at frequencies between 5 MHz and 2150 MHz
BS EN 50119
2001
Railway applications. Fixed installations. Electric traction overhead contact lines
BS EN 50121-1
2000
Railway applications. Electromagnetic compatibility. General
BS EN 50121-2
2000
Railway applications. Electromagnetic compatibility. Emission of the whole railway system to the outside world
BS EN 50121-3-1
2000
Railway applications. Electromagnetic compatibility. Rolling stock. Train and complete vehicle
BS EN 50121-3-2
2000
Railway applications. Electromagnetic compatibility. Rolling stock. Apparatus
BS EN 50121-4
2000
Railway applications. Electromagnetic compatibility. Emission and immunity of the signalling and telecommunications apparatus
BS EN 50121-5
2000
Railway applications. Electromagnetic compatibility. Emission and immunity of fixed power supply installations and apparatus
BS EN 50122-1
1998
Railway applications. Fixed installations. Protective provisions relating to electrical safety and earthing
BS EN 50123-1
2003
Railway applications. Fixed installations. D.C. switchgear. General
BS EN 50123-2
2003
Railway applications. Fixed installations. D.C. switchgear. D.C. circuit breakers
BS EN 50123-3
2003
Railway applications. Fixed installations. D.C. switchgear. Indoor d.c. disconnectors, switch-disconnectors and earthing switches
BS EN 50123-4
2003
Railway applications. Fixed installations. D.C. switchgear. Outdoor d.c. disconnectors, switch-disconnectors and earthing switches
BS EN 50123-5
2003
Railway applications. Fixed installations. D.C. switchgear. Surge arresters and low-voltage limiters for specific use in d.c. systems
BS EN 50123-6
2003
Railway applications. Fixed installations. D.C. switchgear. D.C. switchgear assemblies
BS EN 50123-7-1
2003
Railway applications. Fixed installations. d.c. switchgear. Measurement, control and protection devices for specific use in d.c. traction systems. Measurement, control and protection devices for specific use in d.c. traction systems. Application guide
BS EN 50123-7-2
2003
Railway applications. Fixed installations. d.c. switchgear. Measurement, control and protection devices for specific use in d.c. traction systems. Isolating current transducers and other current measuring devices
BS EN 50123-7-3
2003
Railway applications. Fixed installations. d.c. switchgear. Measurement, control and protection devices for specific use in d.c. traction systems. Isolating voltage transducers and other voltage measuring devices
BS EN 50124-1
2001
Railway applications. Insulation coordination. Basic requirements. Clearances and creepage distances for all electrical and electronic equipment
BS EN 50124-2
2001
Railway applications. Insulation coordination. Overvoltages and related protection
BS EN 50125-1
1999
Railway applications. Environmental conditions for equipment. Equipment on board rolling stock
BS EN 50125-2
2002
Railway applications. Environmental conditions for equipment. Fixed electrical installations
BS EN 50125-3
2003
Railway applications. Environmental conditions for equipment. Equipment for signalling and telecommunications
BS EN 50126
1999
Railway applications. The specification and demonstration of reliability, availability, maintainability and safety (RAMS)
BS EN 50129
2003
Railway applications. Communication, signalling and processing systems. Safety related electronic systems for signalling
BS EN 50130-5
1999
Alarm systems. Environmental test methods
BS EN 50131-1
1997
Alarm systems. Intrusion systems. General requirements
BS EN 50131-6
1998
Alarm systems. Intrusion systems. Power supplies
BS EN 50132-2-1
1998
Alarm systems. CCTV surveillance systems for use in security applications. Black and white cameras
BS EN 50132-4-1
2001
Alarm systems. CCTV surveillance systems for use in security applications. Black and white monitors
BS EN 50132-5
2001
Alarm systems. CCTV surveillance systems for use in security applications. Video transmission
BS EN 50132-7
1996
Alarm systems. CCTV surveillance systems for use in security applications. Application guidelines
BS EN 50133-1
1997
Alarm systems. Access control systems for use in security applications. System requirements
BS EN 50133-7
1999
Alarm systems. Access control systems for use in security applications. Application guidelines
BS EN 50134-1
2002
Alarm systems. Social alarm systems. System requirements
BS EN 50134-2
2000
Alarm systems. Social alarm systems. Trigger devices
BS EN 50134-3
2001
Alarm systems. Social alarm systems. Local unit and controller
BS EN 50136-2-2
1998
Alarm systems. Alarm transmission systems and equipment. Requirements for equipment used in systems using dedicated alarm paths
BS EN 50136-2-3
1998
Alarm systems. Alarm transmission systems and equipment. Requirements for equipment used in systems with digital communicators using the public switched telephone network
BS EN 50136-2-4
1998
Alarm systems. Alarm transmission systems and equipment. Requirements for equipment used in systems with voice communicators using the public switched telephone network
BS EN 50136-1-3
1998
Alarm systems. Alarm transmission systems and equipment. Requirements for systems with digital communicators using the public switched telephone network
BS EN 50136-1-4
1998
Alarm systems. Alarm transmission systems and equipment. Requirements for systems with voice communicators using the public switched telephone network
BS EN 50136-2-1
1998
Alarm systems. Alarm transmission systems and equipment. General requirements for alarm transmission equipment
BS EN 50143
1999
Cables for signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV
BS EN 50144-1
1999
Safety of hand-held electric motor operated tools. General requirements
BS EN 50144-2-2
2000
Safety of hand-held electric motor operated tools. Particular requirements for screwdrivers and impact wrenches
BS EN 50144-2-4
2000
Safety of hand-held electric motor operated tools. Particular requirements for sanders
BS EN 50144-2-5
2000
Safety of hand-held electric motor operated tools. Particular requirements for circular saws and circular knives
BS EN 50144-2-6
2001
Safety of hand-held electric motor operated tools. Particular requirements for hammers
BS EN 50144-2-7
2001
Safety of hand-held electric motor operated tools. Particular requirements for spray guns
BS EN 50144-2-8
1996
Safety of hand-held electric motor operated tools. Particular requirements for sheet metal shears and nibblers
BS EN 50144-2-9
1996
Safety of hand-held electric motor operated tools. Particular requirements for tappers
BS EN 50144-2-10
2001
Safety of hand-held electric motor operated tools. Particular requirements for jig saws
BS EN 50144-2-11
1997
Safety of hand-held electric motor operated tools. Particular requirements for sabre saws and double blade reciprocating saws
BS EN 50144-2-13
2002
Safety of hand-held electric motor operated tools. Particular requirements for chain saws
BS EN 50144-2-14
2001
Safety of hand-held electric motor operated tools. Particular requirements for planers
BS EN 50144-2-15
2001
Safety of hand-held electric motor operated tools. Particular requirements for hedge trimmers
BS EN 50144-2-16
2003
Safety of hand-held electric motor operated tools. Particular requirements for tackers
BS EN 50144-2-17
2000
Safety of hand-held electric motor operated tools. Particular requirements for routers
BS EN 50144-2-18
2000
Safety of hand-held electric motor operated tools. Particular requirements for laminate trimmers
BS EN 50146
2000
Cable ties for electrical installations
BS EN 50147-1
1997
Anechoic chambers. Shield attenuation measurement
BS EN 50147-2
1997
Anechoic chambers. Alternative test site suitability with respect to site attenuation
BS EN 50148
1996
Electronic taximeters
BS EN 50149
2001
Railway applications. Fixed installations. Electric traction. Copper and copper alloy grooved contact wires
BS EN 50152-1
1999
Railway applications. Fixed installations. Particular requirements for a.c. switchgear. Single-phase circuit-breakers with Um above 1 kV
BS EN 50152-2
1999
Railway applications. Fixed installations. Particular requirements for a.c. switchgear. Single-phase disconnectors, earthing switches and switches with Um above 1 kV
BS EN 50152-3-2
2001
Railway applications. Fixed installations. Particular requirements for a.c. switchgear. Measurement, control and protection devices for specific use in a.c. traction systems. Single-phase current transformers
BS EN 50152-3-3
2001
Railway applications. Fixed installations. Particular requirements for a.c. switchgear. Measurement, control and protection devices for specific use in a.c. traction systems. Single-phase inductive voltage transformers
BS EN 50153
2002
Railway applications. Rolling stock. Protective provisions relating to electrical hazards
BS EN 50155
2001
Railway applications. Electronic equipment used on rolling stock
BS EN 50157-1
1999
Domestic and similar electronic equipment interconnection requirements: AV. link. General
BS EN 50157-2-1
1999
Domestic and similar electronic equipment interconnection requirements: AV. link. Signal quality matching and automatic selection of source devices
BS EN 50157-2-2
1999
Domestic and similar electronic equipment interconnection requirements: AV. link. Basis system oriented commands
BS EN 50157-2-3
1999
Domestic and similar electronic equipment interconnection requirements: AV. link. System oriented application
BS EN 50159-1
2001
Railway applications. Communication, signalling and processing systems. Safety related communication in closed transmission systems
BS EN 50159-2
2001
Railway applications. Communication, signalling and processing systems. Safety related communication in open transmission systems
BS EN 50160
2000
Voltage characteristics of electricity supplied by public distribution systems
BS EN 50163
2004
Railway applications. Supply voltages of traction systems
BS EN 50164-1
2000
Lightning protection components (LPC). Requirements for connection components
BS EN 50164-2
2002
Lightning protection components (LPC). Requirements for conductors and earth electrodes
BS EN 50165
1997
Electrical equipment of non-electric appliances for household and similar purposes. Safety requirements
BS EN 50167
1996
Sectional specification for horizontal floor wiring cables with a common overall screen for use in digital communication
BS EN 50168
1996
Sectional specification for work area wiring cables with a common overall screen for use in digital communication
BS EN 50169
1996
Sectional specification for backbone cables, riser and campus, with a common overall screen for use in digital communication
BS EN 50170
1997
General purpose field communication system
BS EN 50171
2001
Central power supply systems
BS EN 50174-1
2001
Information technology. Cabling installation. Specification and quality assurance
BS EN 50174-2
2001
Information technology. Cabling installation. Installation planning and practices inside buildings
BS EN 50176
1997
Automatic electrostatic spraying installations for flammable liquid spraying material
BS EN 50177
1997
Automatic electrostatic spraying installations for flammable coating powder
BS EN 50178
1998
Electronic equipment for use in power installations
BS EN 50180
1999
Bushings above 1 kV up to 36 kV and from 250 A to 3,15 kA for liquid filled transformers
BS EN 50181
1999
Plug-in type bushings above 1 kV up to 36 kV and from 250 A to 1.25 kA for equipment other than liquid filled transformers
BS EN 50182
2001
Conductors for overhead lines. Round wire concentric lay stranded conductors
BS EN 50183
2000
Conductors for overhead lines. Aluminium-magnesium-silicon alloy wires
BS EN 50186-1
1999
Live-line washing systems for power installations with nominal voltages above 1 kV. Common requirements
BS EN 50186-2
1999
Live-line washing systems for power installations with nominal voltages above 1 kV. National annexes
BS EN 50187
1999
Gas-filled compartments for a.c. switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
BS EN 50189
2000
Conductors for overhead lines. Zinc coated steel wires
BS EN 50191
2001
Erection and operation of electrical test equipment
BS EN 50192
1996
Arc welding equipment. Plasma cutting systems for manual use
BS EN 50193
1997
Closed electrical instantaneous water heaters. Methods for measuring performance
BS EN 50194
2000
Electrical apparatus for the detection of combustible gases in domestic premises. Test methods and performance requirements
BS EN 50195
1997
Code of practice for the safe use of fully enclosed askarel-filled electrical equipment
BS EN 50199
1996
Electromagnetic compatibility (EMC). Product standard for arc welding equipment
BS EN 50200
2000
Method of test for resistance to fire of unprotected small cables for use in emergency circuits
BS EN 50201
2001
Interfaces for DVB-IRD
BS EN 50203
1997
Automatic channel installation (ACI)
BS EN 50205
2002
Relays with forcibly guided (mechanically linked) contacts
BS EN 50206-1
1999
Railway applications. Rolling stock. Pantographs: characteristics and tests. Pantographs for main line vehicles
BS EN 50206-2
1999
Railway applications. Rolling stock. Pantographs: characteristics and tests. Pantographs for metros and light rail vehicles
BS EN 50207
2001
Railway applications. Electronic power converters for rolling stock
BS EN 50209
1999
Test of insulation of bars and coils of high-voltage machines
BS EN 50212
1997
Connectors for thermoelectric sensors
BS EN 50214
1998
Flexible cables for lifts
BS EN 50215
1999
Railway applications. Testing of rolling stock after completion of construction and before entry into service
BS EN 50216-1
2002
Power transformers and reactor fittings. General
BS EN 50216-2
2002
Power transformers and reactor fittings. Gas and oil actuated relay for liquid immersed transformers and reactors with conservator
BS EN 50216-3
2002
Power transformers and reactor fittings. Protective relay for hermetically sealed liquid-immersed transformers and reactors without gaseous cushion
BS EN 50216-4
2002
Power transformers and reactor fittings. Basic accessories (earthing terminal, drain and filling devices, thermometer pocket, wheel assembly)
BS EN 50216-5
2002
Power transformers and reactor fittings. Liquid level, pressure devices and flow indicators
BS EN 50216-6
2002
Power transformers and reactor fittings. Cooling equipment. Removable radiators for oil-immersed transformers
BS EN 50216-7
2002
Power transformers and reactor fittings. Electric pumps for transformer oil
BS EN 50221
1997
Common interface specification for conditional access and other digital video broadcasting decoder applications
BS EN 50223
2001
Automatic electrostatic application equipment for flammable flock material