Tools

Topics & Collections

small text medium text large text

BSI Standards List

Standard
Year
Title
BS EN 60704-2-4
2001
Household and similar electrical appliances. Test code for the determination of airborne acoustical noise. Particular requirements for washing machines and spin extractors
BS EN 60705
1999
Household micStandardsave ovens. Methods for measuring performance
BS EN 60707
1999
Flammability of solid non-metallic materials when exposed to flame sources. List of test methods
BS EN 60712
1996
Helical-scan video-tape cassette system using 19 mm (3/4 in) magnetic tape, known as U-format
BS EN 60715
2001
Dimensions of low-voltage switchgear and controlgear. Standardized mounting on rails for mechanical support of electrical devices in switchgear and controlgear installations
BS EN 60719
1993
Calculation for the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V
BS EN 60721-1
1996
Classification of environmental conditions. Environmental parameters and their severities
BS EN 60721-3-0
1993
Classification of environmental conditions. Classification of groups of environmental parameters and their severities. Introduction
BS EN 60721-3-1
1997
Classification of environmental conditions. Classification of groups of environmental parameters and their severities. Storage
BS EN 60721-3-2
1997
Classification of environmental conditions. Classification of groups of environmental parameters and their severities. Transportation
BS EN 60721-3-3
1995
Classification of environmental conditions. Classification of groups of environmental parameters and their severities. Stationary use at weatherprotected locations
BS EN 60721-3-4
1995
Classification of environmental conditions. Classification of groups of environmental parameters and their severities. Stationary use at non-weatherprotected locations
BS EN 60721-3-5
1997
Classification of environmental conditions. Classification of groups of environmental parameters and their severities. Ground vehicle installations
BS EN 60721-3-6
1993
Classification of environmental conditions. Classification of groups of environmental parameters and their severities. Ship environment
BS EN 60721-3-7
1996
Classification of environmental conditions. Classification of groups of environmental parameters and their severities. Portable and non-stationary use
BS EN 60721-3-9
1993
Classification of environmental conditions. Classification of groups of environmental parameters and their severities. Microclimates inside products
BS EN 60726
2003
Dry-type power transformers
BS EN 60728-6
2003
Cable networks for television signals, sound signals and interactive services. Optical equipment
BS EN 60730-1
2001
Specification for automatic electrical controls for household and similar use. General requirements
BS EN 60730-2-1
1997
Specification for automatic electrical controls for household and similar use. Particular requirements. Electrical controls for electrical household appliances
BS EN 60730-2-2
2002
Specification for automatic electrical controls for household and similar use. Particular requirements. Particular requirements for thermal motor protectors
BS EN 60730-2-3
1992
Specification for automatic electrical controls for household and similar use. Particular requirements. Thermal protectors for ballasts for tubular fluorescent lamps
BS EN 60730-2-5
2002
Specification for automatic electrical controls for household and similar use. Particular requirements. Particular requirements for automatic electrical burner control systems
BS EN 60730-2-6
1995
Specification for automatic electrical controls for household and similar use. Particular requirements. Automatic electrical pressure sensing controls including mechanical requirements
BS EN 60730-2-7
1992
Specification for automatic electrical controls for household and similar use. Particular requirements. Timers and time switches
BS EN 60730-2-8
2002
Specification for automatic electrical controls for household and similar use. Particular requirements. Particular requirements for electrically operated water valves, including mechanical requirements
BS EN 60730-2-9
2002
Specification for automatic electrical controls for household and similar use. Particular requirements. Particular requirements for temperature sensing controls
BS EN 60730-2-11
1994
Specification for automatic electrical controls for household and similar use. Particular requirements. Energy regulators
BS EN 60730-2-12
1994
Specification for automatic electrical controls for household and similar use. Particular requirements. Electrically operated door locks
BS EN 60730-2-13
1998
Specification for automatic electrical controls for household and similar use. Particular requirements. Particular requirements for humidity sensing controls
BS EN 60730-2-13
1998
Specification for automatic electrical controls for household and similar use. Particular requirements. Particular requirements for humidity sensing controls
BS EN 60730-2-14
1998
Specification for automatic electrical controls for household and similar use. Particular requirements. Particular requirements for electric actuators
BS EN 60730-2-15
1996
Specification for automatic electrical controls for household and similar use. Particular requirements. Automatic electrical water level sensing controls of the float or electrode-sensor type used in boiler applications
BS EN 60730-2-16
1998
Specification for automatic electrical controls for household and similar use. Particular requirements. Particular requirements for automatic electrical water level controls of the float type for household and similar applications
BS EN 60730-2-18
1999
Specification for automatic electrical controls for household and similar use. Particular requirements. Particular requirements for automatic electrical water and air flow sensing controls, including mechanical requirements
BS EN 60730-2-19
2002
Specification for automatic electrical controls for household and similar use. Particular requirements. Particular requirements for electrically operated oil valves, including mechanical requirements
BS EN 60731
1997
Medical electrical equipment. Dosimeters with ionization chambers as used in radiotherapy
BS EN 60734
2003
Household electrical appliances. Performance. Hard water for testing
BS EN 60735
1992
Methods for measurement of video tape properties
BS EN 60738-1
1999
Thermistors. Directly heated positive step-function temperature coefficient. Generic specification
BS EN 60738-1-1
1999
Thermistors. Directly heated positive step-function temperature coefficient. Blank detail specification. Current limiting application. Assessment level EZ
BS EN 60738-1-2
1999
Thermistors. Directly heated positive step-function temperature coefficient. Blank detail specification. Heating element application. Assessment level EZ
BS EN 60738-1-3
1999
Thermistors. Directly heated positive step-function temperature coefficient. Blank detail specification. Inrush current application. Assessment level EZ
BS EN 60738-1-4
1999
Thermistors. Directly heated positive step-function temperature coefficient. Blank detail specification. Sensing application. Assessment level EZ
BS EN 60742
1996
Isolating transformers and safety isolating transformers. Requirements
BS EN 60743
2001
Live working. Terminology for tools, equipment and devices
BS EN 60745-2-14
2003
Hand-held motor-operated electric tools. Safety. Particular requirements for planers
BS EN 60745-2-17
2003
Hand-held motor-operated electric tools. Safety. Particular requirements for routers and trimmers
BS EN 60745-2-20
2003
Hand-held motor-operated electric tools. Safety. Particular requirements for band saws
BS EN 60745-1
2003
Hand-held motor-operated electric tools. Safety. General requirements
BS EN 60745-2-1
2003
Hand-held motor-operated electric tools. Safety. Particular requirements for drills and impact drills
BS EN 60745-2-4
2003
Hand-held motor-operated electric tools. Safety. Particular requirements for sanders and polishers other than disk type
BS EN 60745-2-5
2003
Hand-held motor-operated electric tools. Safety. Particular requirements for circular saws
BS EN 60745-2-6
2003
Hand-held motor-operated electric tools. Safety. Particular requirements for hammers
BS EN 60745-2-8
2003
Hand-held motor-operated electric tools. Safety. Particular requirements for shears and nibblers
BS EN 60745-2-9
2003
Hand-held motor-operated electric tools. Safety. Particular requirements for tappers
BS EN 60745-2-11
2003
Hand-held motor-operated electric tools. Safety. Particular requirements for reciprocating saws (jig and sabre saws)
BS EN 60746-1
2003
Expression of performance of electrochemical analyzers. General
BS EN 60746-2
2003
Expression of performance of electrochemical analyzers. pH value
BS EN 60747-5-1
2001
Discrete semiconductor devices and integrated circuits. Optoelectronic devices. General
BS EN 60747-15
2004
Discrete semiconductor devices and integrated circuits. Isolated power semiconductor devices
BS EN 60747-16-1
2002
Discrete semiconductor devices and integrated circuits. MicStandardave integrated circuits. Amplifiers
BS EN 60747-16-3
2002
Discrete semiconductor devices and integrated circuits. MicStandardave integrated circuits. Frequency converters
BS EN 60749
1999
Semiconductor devices. Mechanical and climatic test methods
BS EN 60749-1
2003
Semiconductor devices. Mechanical and climatic test methods. General
BS EN 60749-4
2002
Semiconductor devices. Mechanical and climatic test methods. Damp heat, steady state, highly accelerated stress test (HAST)
BS EN 60749-5
2003
Semiconductor devices. Mechanical and climatic test methods. Steady-state temperature humidity bias life test
BS EN 60749-6
2002
Semiconductor devices. Mechanical and climatic test methods. Storage at high temperature
BS EN 60749-8
2003
Semiconductor devices. Mechanical and climatic test methods. Sealing
BS EN 60749-9
2002
Semiconductor devices. Mechanical and climatic test methods. Permanence of marking
BS EN 60749-11
2002
Semiconductor devices. Mechanical and climatic test methods. Rapid change of temperature. Two-fluid-bath method
BS EN 60749-12
2002
Semiconductor devices. Mechanical and climatic test methods. Vibration, variable frequency
BS EN 60749-15
2003
Semiconductor devices. Mechanical and climatic test methods. Resistance to soldering temperature for through-hole mounted devices
BS EN 60749-16
2003
Semiconductor devices. Mechanical and climatic test methods. Particle impact noise detection (PIND)
BS EN 60749-17
2003
Semiconductor devices. Mechanical and climatic test methods. Neutron irradiation
BS EN 60749-18
2003
Semiconductor devices. Mechanical and climatic test methods. Ionizing radiation (total dose)
BS EN 60749-19
2003
Semiconductor devices. Mechanical and climatic test methods. Die shear strength
BS EN 60749-20
2003
Semiconductor devices. Mechanical and climatic test methods. Resistance of plastic-encapsulated SMDs to the combined effect of moisture and soldering heat
BS EN 60749-22
2003
Semiconductor devices. Mechanical and climatic test methods. Bond strength
BS EN 60749-25
2003
Semiconductor devices. Mechanical and climatic test methods. Temperature cycling
BS EN 60749-29
2003
Semiconductor devices. Mechanical and climatic test methods. Latch-up test
BS EN 60749-31
2003
Semiconductor devices. Mechanical and climatic test methods. Flammability of plastic-encapsulated devices (internally induced)
BS EN 60749-32
2003
Semiconductor devices. Mechanical and climatic test methods. Flammability of plastic-encapsulated devices (externally induced)
BS EN 60749-36
2003
Semiconductor devices. Mechanical and climatic test methods. Acceleration, steady state
BS EN 60751
1996
Industrial platinum resistance thermometer sensors
BS EN 60756
1993
Non-broadcast video tape recorders. Time base stability
BS EN 60763-1
1996
Specification for laminated pressboard. Definitions, classification and general requirements
BS EN 60763-2
1996
Specification for laminated pressboard. Methods of test
BS EN 60763-3-1
1996
Specification for laminated pressboard. Specifications for individual materials. Specifications for laminated precompressed board. Types LB 3.1.1, 3.1.2, 3.3.1 and 3.3.2
BS EN 60770-1
1999
Transmitters for use in industrial-process control systems. Methods for performance evaluation
BS EN 60770-2
2003
Transmitters for use in industrial-process control systems. Methods for inspection and routine testing
BS EN 60774-1
1994
Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS. VHS and compact VHS video cassette system
BS EN 60774-2
2000
Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS. FM audio recording
BS EN 60774-3
1994
Specification for helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS. S-VHS
BS EN 60793-1-1
2003
Optical fibres. Measurement methods and test procedures. General and guidance
BS EN 60793-1-20
2002
Optical fibres. Measurement methods and test procedures. Fibre geometry
BS EN 60793-1-21
2002
Optical fibres. Measurement methods and test procedures. Coating geometry
BS EN 60793-1-22
2002
Optical fibres. Measurement methods and test procedures. Length measurement
BS EN 60793-1-31
2002
Optical fibres. Measurement methods and test procedures. Tensile strength
BS EN 60793-1-32
2003
Optical fibres. Measurement methods and test procedures. Coating strippability
BS EN 60793-1-33
2002
Optical fibres. Measurement methods and test procedures. Stress corrosion susceptibility
BS EN 60793-1-34
2002
Optical fibres. Measurement methods and test procedures. Fibre curl
BS EN 60793-1-40
2003
Optical fibres. Measurement methods and test procedures. Attenuation
BS EN 60793-1-41
2002
Optical fibres. Measurement methods and test procedures. Bandwidth
BS EN 60793-1-41
2003
Optical fibres. Measurement methods and test procedures. Bandwidth
BS EN 60793-1-42
2002
Optical fibres. Measurement methods and test procedures. Chromatic dispersion
BS EN 60793-1-43
2002
Optical fibres. Measurement methods and test procedures. Numerical aperture
BS EN 60793-1-44
2002
Optical fibres. Measurement methods and test procedures. Cut-off wavelength
BS EN 60793-1-46
2002
Optical fibres. Measurement methods and test procedures. Monitoring of changes in optical transmittance
BS EN 60793-1-47
2002
Optical fibres. Measurement methods and test procedures. Macrobending loss
BS EN 60793-1-48
2003
Optical fibres. Measurement methods and test procedures. Polarization mode dispersion
BS EN 60793-1-49
2003
Optical fibres. Measurement methods and test procedures. Differential mode delay
BS EN 60793-1-50
2002
Optical fibres. Measurement methods and test procedures. Damp heat (steady state)
BS EN 60793-1-51
2002
Optical fibres. Measurement methods and test procedures. Dry heat
BS EN 60793-1-52
2002
Optical fibres. Measurement methods and test procedures. Change of temperature
BS EN 60793-1-53
2002
Optical fibres. Measurement methods and test procedures. Water immersion
BS EN 60793-1-54
2003
Optical fibres. Measurement methods and test procedures. Gamma irradiation
BS EN 60793-2-20
2002
Optical fibres. Product specifications. Sectional specification for category A2 multimode fibres
BS EN 60793-2-30
2002
Optical fibres. Product specifications. Sectional specification for category A3 multimode fibres
BS EN 60793-2-40
2002
Optical fibres. Product specifications. Sectional specification for category A4 multimode fibres
BS EN 60794-1-1
2002
Optical fibre cables. Generic specification. General
BS EN 60794-1-2
2003
Optical fibre cables. Generic specification. Basic optical cable test procedures
BS EN 60794-2
2003
Optical fibre cables. Indoor cables. Sectional specification
BS EN 60794-2-10
2003
Optical fibre cables. Indoor cables. Indoor cables. Family specification for simplex and duplex cables
BS EN 60794-2-20
2003
Optical fibre cables. Indoor cables. Family specification for multi-fibre optical distribution cables
BS EN 60794-2-30
2003
Optical fibre cables. Indoor cables. Family specification for optical fibre ribbon cables
BS EN 60794-3
2002
Optical fibre cables. Sectional specification. Outdoor cables
BS EN 60794-3-10
2002
Optical fibre cables. Outdoor cables. Family specification for duct and directly buried optical telecommunication cables
BS EN 60794-3-20
2002
Optical fibre cables. Outdoor cables. Family specification for optical self-supporting aerial telecommunication cables
BS EN 60794-3-30
2003
Optical fibre cables. Outdoor cables. Family specification for optical telecommunication cables for lake and river crossings
BS EN 60794-4
2003
Optical fibre cables. Sectional specification. Aerial optical cables along electrical power lines
BS EN 60799
1998
Electrical accessories. Cord sets and interconnection cord sets
BS EN 60801-2
1993
Electromagnetic compatibility for industrial-process measurement and control equipment. Electrostatic discharge requirements
BS EN 60804
2001
Integrating-averaging sound level meters
BS EN 60809
1996
Filament lamps for road vehicles. Dimensional, electrical and luminous requirements
BS EN 60810
2003
Lamps for road vehicles. Performance requirements
BS EN 60811-1-1
1995
Insulating and sheathing materials of electric cables. Common test methods. General application. Measurement of thickness and overall dimensions. Tests for determining the mechanical properties
BS EN 60811-1-2
1995
Insulating and sheathing materials of electric cables. Common test methods. General application. Thermal ageing methods
BS EN 60811-1-3
1995
Insulating and sheathing materials of electric cables. Common test methods. General application. Methods for determining the density. Water absorption tests. Shrinkage test
BS EN 60811-1-4
1995
Insulating and sheathing materials of electric cables. Common test methods. General application. Tests at low temperature
BS EN 60811-3-1
1995
Insulating and sheathing materials of electric cables. Common test methods. Methods specific to PVC compounds. Pressure test at high temperature. Tests for resistance to cracking
BS EN 60811-4-1
1995
Methods specific to polyethylene and polypropylene compounds. Resistance to environmental stress cracking. Wrapping test after thermal ageing in air. Measurement of the flow index. Carbon black and/or mineral content measurement in PE
BS EN 60811-5-1
2000
Insulating and sheathing materials of electric cables. Common test methods. Methods specific to filling compounds. Drop point. Separation of oil. Lower temperature brittleness. Total acid number. Absence of corrosive components. Permittivity at 23°C. D.C.
BS EN 60814
1998
Insulating liquids. Oil-impregnated paper and pressboard. Determination of water by automatic coulometric Karl Fischer titration
BS EN 60819-1
1996
Non-cellulosic papers for electrical purposes. Definitions and general requirements
BS EN 60819-2
2002
Non-cellulosic papers for electrical purposes. Methods of test
BS EN 60825-1
1994
Safety of laser products. Equipment classification, requirements and user's guide
BS EN 60825-2
2004
Safety of laser products. Safety of optical fibre communication systems
BS EN 60825-4
1998
Safety of laser products. Laser guards
BS EN 60831-1
1998
Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1000 V. General. Performance, testing and rating. Safety requirements. Guide for installation and operation
BS EN 60831-2
1996
Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1000 V. Ageing test, self-healing test and destruction test
BS EN 60832
1997
Specification for insulating poles (insulating sticks) and universal tool attachments (fittings) for live working
BS EN 60834-1
2000
Teleprotection equipment of power systems. Performance and testing. Command systems
BS EN 60835-1-2
1995
Methods of measurement for equipment used in digital micStandardave radio transmission systems. Measurements common to terrestrial radio-relay systems and satellite earth stations. Basic characteristics
BS EN 60835-1-3
1997
Methods of measurement for equipment used in digital micStandardave radio transmission systems. Measurements common to terrestrial radio-relay systems and satellite earth stations. Transmission characteristics
BS EN 60835-1-4
1997
Methods of measurement for equipment used in digital micStandardave radio transmission systems. Measurements common to terrestrial radio-relay systems and satellite earth stations. Transmission performance
BS EN 60835-2-2
1995
Methods of measurement for equipment used in digital micStandardave radio transmission systems. Measurements on terrestrial radio-relay systems. Antenna
BS EN 60835-2-3
1995
Methods of measurement for equipment used in digital micStandardave radio transmission systems. Measurements on terrestrial radio-relay systems. R F branching networks
BS EN 60835-2-4
1997
Methods of measurement for equipment used in digital micStandardave radio transmission systems. Measurements on terrestrial radio-relay systems. Transmitter/receiver including modulator/demodulator
BS EN 60835-2-5
1995
Methods of measurement for equipment used in digital micStandardave radio transmission systems. Measurements on terrestrial radio-relay systems. Digital signal processing sub-system
BS EN 60835-2-6
1996
Methods of measurement for equipment used in digital micStandardave radio transmission systems. Measurements on terrestrial radio-relay systems. Protection switching
BS EN 60835-2-7
1995
Methods of measurement for equipment used in digital micStandardave radio transmission systems. Measurements on terrestrial radio-relay systems. Diversity switching and combining equipment
BS EN 60835-2-8
1996
Methods of measurement for equipment used in digital micStandardave radio transmission systems. Measurements on terrestrial radio-relay systems. Adaptive equalizer
BS EN 60835-2-9
1997
Methods of measurement for equipment used in digital micStandardave radio transmission systems. Measurements on terrestrial radio-relay systems. Service channels
BS EN 60835-2-10
1993
Methods of measurement for equipment used in digital micStandardave radio transmission systems. Measurements on terrestrial radio-relay systems. Overall system performance
BS EN 60835-2-11
1997
Methods of measurement for equipment used in digital micStandardave radio transmission systems. Measurements on terrestrial radio-relay systems. Cross-polarization interference canceller
BS EN 60835-3-2
1996
Methods of measurement for equipment used in digital micStandardave radio transmission systems. Measurements on satellite earth stations. Antenna
BS EN 60835-3-4
1997
Methods of measurement for equipment used in digital micStandardave radio transmission systems. Measurements on satellite earth stations. Low noise amplifier
BS EN 60835-3-5
1995
Methods of measurement for equipment used in digital micStandardave radio transmission systems. Measurements on satellite earth stations. Up- and down-converters
BS EN 60835-3-6
1997
Methods of measurement for equipment used in digital micStandardave radio transmission systems. Measurements on satellite earth stations. High-power amplifiers
BS EN 60835-3-7
1996
Methods of measurement for equipment used in digital micStandardave radio transmission systems. Measurements on satellite earth stations. Figure-of-merit of receiving system
BS EN 60835-3-9
1995
Methods of measurement for equipment used in digital micStandardave radio transmission systems. Measurements on satellite earth stations. Terminal equipment SCPC-PSK
BS EN 60835-3-10
1995
Methods of measurement for equipment used in digital micStandardave radio transmission systems. Measurements on satellite earth stations. Terminal equipment. TDMA traffic earth station
BS EN 60835-3-11
1996
Methods of measurement for equipment used in digital micStandardave radio transmission systems. Measurements on satellite earth stations. Service channel equipment for SCPC-PSK transmission
BS EN 60835-3-12
1997
Methods of measurement for equipment used in digital micStandardave radio transmission systems. Measurements on satellite earth stations. Overall system performance
BS EN 60835-3-13
1997
Methods of measurement for equipment used in digital micStandardave radio transmission systems. Measurements on satellite earth stations. VSAT systems
BS EN 60835-3-14
1997
Methods of measurement for equipment used in digital micStandardave radio transmission systems. Measurements on satellite earth stations. Earth stations for satellite news gathering (SNG)
BS EN 60838-1
2004
Miscellaneous lampholders. General requirements and tests
BS EN 60838-2-1
1997
Miscellaneous lampholders. Particular requirements. Lampholders S14
BS EN 60843-1
1994
Helical-scan video tape cassette system using 8 mm magnetic tape. 8 mm video. General specifications
BS EN 60843-2
1995
Helical-scan video tape cassette system using 8 mm magnetic tape. 8 mm video. PCM multi-track audio system
BS EN 60843-3
1993
Helical-scan video tape cassette system using 8 mm magnetic tape. 8 mm video. High-band specifications for Hi 8
BS EN 60843-4
2001
Helical-scan video tape cassette system using 8 mm magnetic tape. 8 mm video. Video subcode (VSC)
BS EN 60848
2002
GRAFCET specification language for sequential function charts
BS EN 60849
1998
Sound systems for emergency purposes
BS EN 60851-1
1998
Methods of test for winding wires. General
BS EN 60851-2
1998
Methods of test for winding wires. Determination of dimensions
BS EN 60851-3
1998
Methods of test for winding wires. Mechanical properties
BS EN 60851-4
1998
Methods of test for winding wires. Chemical properties
BS EN 60851-5
1998
Methods of test for winding wires. Electrical properties
BS EN 60851-6
1998
Methods of test for winding wires. Thermal properties
BS EN 60852-4
1997
Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment. Transformers and inductors using YUI-2 laminations
BS EN 60855
1997
Insulating foam-filled tubes and solid rods for live working
BS EN 60856
1993
Specification for pre-recorded optical reflective videodisk system "Laser vision" 50 Hz/625 lines. PAL
BS EN 60862-1
2003
Surface acoustic wave (SAW) filters of assessed quality. Generic specification
BS EN 60862-2
2002
Surface acoustic wave (SAW) filters of assessed quality. Guidance on use
BS EN 60862-3
2003
Surface acoustic wave (SAW) filters of assessed quality. Standard outlines
BS EN 60865-1
1994
Short-circuit currents. Calculation of effects. Definitions and calculation methods
BS EN 60867
1994
Insulating liquids. Specifications for unused liquids based on synthetic aromatic hydrocarbons
BS EN 60868
1993
Flickermeter. Functional and design specifications
BS EN 60868-0
1993
Flickermeter. Evaluation of flicker severity
BS EN 60869-1
2000
Fibre optic attenuators. Generic specification
BS EN 60870-5-1
1994
Telecontrol equipment and systems. Transmission protocols. Transmission frame formats
BS EN 60870-5-2
1994
Telecontrol equipment and systems. Transmission protocols. Link transmission procedures
BS EN 60870-5-3
1992
Telecontrol equipment and systems. Transmission protocols. Specification for general structure of application data
BS EN 60870-5-4
1994
Telecontrol equipment and systems. Transmission protocols. Definition and coding of application information elements
BS EN 60870-5-5
1996
Telecontrol equipment and systems. Transmission protocols. Basic application functions
BS EN 60870-5-101
2003
Telecontrol equipment and systems. Transmission protocols. Companion standard for basic telecontrol tasks
BS EN 60870-5-102
1997
Telecontrol equipment and systems. Transmission protocols. Companion standard for the transmission of integrated totals in electric power systems
BS EN 60870-5-103
1998
Telecontrol equipment and systems. Transmission protocols. Companion standard for the informative interface of protection equipment
BS EN 60870-2-1
1996
Telecontrol equipment and systems. Operating conditions. Power supply and electromagnetic compatibility
BS EN 60870-2-2
1997
Telecontrol equipment and systems. Operating conditions. Environmental conditions (climatic, mechanical and other non-electrical influences)
BS EN 60870-5-104
2001
Telecontrol equipment and systems. Transmission protocols. Network access for IEC 60870-5-101 using standard transport profiles
BS EN 60870-6-2
1996
Telecontrol equipment and systems. Telecontrol protocols compatible with ISO Standard and ITU-T recommendations. Use of basic Standard (OSI layers 1-4)
BS EN 60870-6-502
1996
Telecontrol equipment and systems. Telecontrol protocols compatible with ISO Standard and ITU-T recommendations. TASE.1 Protocol definitions
BS EN 60870-6-503
2002
Telecontrol equipment and systems. Telecontrol protocols compatible with ISO Standard and ITU-T recommendations. TASE.2 Services and protocol
BS EN 60870-6-701
1998
Telecontrol equipment and systems. Telecontrol protocols compatible with ISO Standard and ITU-T recommendations. Functional profile for providing the TASE.1 application service in end systems
BS EN 60870-6-702
1999
Telecontrol equipment and systems. Telecontrol protocols compatible with ISO Standard and ITU-T recommendations. Functional profile for providing the TASE.2 application service in end systems
BS EN 60870-6-802
2002
Telecontrol equipment and systems. Telecontrol protocols compatible with ISO Standard and ITU-T recommendations. TASE.2 Object models
BS EN 60871-1
1998
Shunt capacitors for a.c. power systems having a rated voltage above 1 kV. General, testing and rating. Safety requirements. Guide for installation and operation
BS EN 60871-4
1997
Shunt capacitors for a.c. power systems having a rated voltage above 1 kV. Internal fuses
BS EN 60872-2
1999
Maritime navigation and radiocommunication equipment and systems. Radar plotting aids. Automatic tracking aids (ATA). Methods of testing and required test results
BS EN 60872-3
2001
Maritime navigation and radiocommunication equipment and systems. Radar plotting aids. Electronic plotting aid (EPA). Performance requirements. Methods of testing and required test results
BS EN 60872
1993
Marine automatic radar plotting aids (ARPA). Operational requirements. Methods of testing and test results
BS EN 60872-1
1999
Maritime navigation and radiocommunication equipment and systems. Radar plotting aids. Automatic radar plotting aids (ARPA). Methods of testing and required test results
BS EN 60874-1
1999
Connectors for optical fibres and cables. Generic specification
BS EN 60874-17
1997
Connectors for optical fibres and cables. Sectional specification for fibre optic connector. Type F-05 (friction lock)
BS EN 60874-19
1997
Connectors for optical fibres and cables. Sectional specification for fibre optic connector. Type SC-D (Duplex)
BS EN 60875-1
2001
Fibre optic branching devices. Generic specification
BS EN 60875-1-1
1998
Fibre optic branching devices. Blank detail specification
BS EN 60876-1
2001
Fibre optic spatial switches. Generic specification
BS EN 60885-2
2003
Electrical test methods for electric cables. Partial discharge tests
BS EN 60885-3
2003
Electrical test methods for electric cables. Test methods for partial discharge measurements on lengths of extruded power cables
BS EN 60889
1997
Hard drawn aluminium wire for overhead line conductors
BS EN 60891
1995
Procedures for temperature and irradiance corrections to measured I-V characteristics of crystalline silicon photovoltaic devices
BS EN 60893-1
1995
Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Definitions, designations and general requirements
BS EN 60893-2
2004
Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Methods of test
BS EN 60893-3-2
2004
Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materials. Requirements for rigid laminated sheets based on epoxy resins
BS EN 60893-3-3
2004
Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materials. Requirements for rigid laminated sheets based on melamine resins
BS EN 60893-3-4
2004
Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materials. Requirements for rigid laminated sheets based on phenolic resins
BS EN 60893-3-5
2004
Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materials. Requirements for rigid laminated sheets based on polyester resins
BS EN 60893-3-6
2004
Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materials. Requirements for rigid laminated sheets based on silicone resins
BS EN 60895
2003
Live working. Conductive clothing for use at nominal voltage up to 800 kV a.c. and ± 600 kV d.c.
BS EN 60896-1
1992
Stationary lead-acid batteries. General requirements and methods of test. Vented types
BS EN 60896-2
1996
Stationary lead-acid batteries. General requirements and methods of test. Valve regulated types
BS EN 60896-11
2003
Stationary lead-acid batteries. General requirements and methods of test. Vented types. General requirements and methods of tests
BS EN 60898
1991
Specification for circuit-breakers for overcurrent protection for household and similar installations
BS EN 60898-1
2003
Circuit-breakers for overcurrent protection for household and similar installations. Circuit-breakers for a.c. operation
BS EN 60900
2004
Hand tools for live working up to 1000 V a.c. and 1500 V d.c.
BS EN 60901
1996
Specification for single-capped fluorescent lamps. Performance specifications
BS EN 60903
2003
Live working. Gloves of insulating material
BS EN 60904-1
1993
Photovoltaic devices. Measurement of photovoltaic current-voltage characteristics
BS EN 60904-2
1993
Photovoltaic devices. Requirements for reference solar cells
BS EN 60904-3
1993
Photovoltaic devices. Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data
BS EN 60904-5
1996
Photovoltaic devices. Determination of the equivalent cell temperature (ECT) of photovoltaic (PV) devices by the open-circuit voltage method
BS EN 60904-7
1998
Photovoltaic devices. Computation of spectral mismatch error introduced in the testing of a photovoltaic device
BS EN 60904-8
1998
Photovoltaic devices. Measurement of spectral response of a photovoltaic (PV) device
BS EN 60904-10
1998
Photovoltaic devices. Methods of linearity measurement
BS EN 60908
1998
Audio recording. Compact disc digital audio system
BS EN 60909-0
2001
Short-circuit currents in three-phase a.c. systems. Calculation of currents
BS EN 60917-1
1999
Modular order for the development of mechanical structures for electronic equipment practices. Generic standard
BS EN 60917-2
1994
Modular order for the development of mechanical structures for electronic equipment practices. Sectional specification. Interface co-ordination dimensions for the 25 mm equipment practice
BS EN 60917-2-1
1997
Modular order for the development of mechanical structures for electronic equipment practices. Sectional specification. Interface co-ordination dimensions for the 25 mm equipment practice. Detail specification. Dimensions for cabinets and racks
BS EN 60917-2-2
1997
Modular order for the development of mechanical structures for electronic equipment practices. Sectional specification. Interface co-ordination dimensions for the 25 mm equipment practice. Detail specification. Dimensions for subracks, chassis, backplanes
BS EN 60920
1991
Ballasts for tubular fluorescent lamps. General and safety requirements
BS EN 60921
1991
Specification for ballasts for tubular fluorescent lamps. Performance requirements
BS EN 60922
1997
Auxiliaries for lamps. Ballasts for discharge lamps (excluding tubular fluorescent lamps). General and safety requirements
BS EN 60923
1996
Auxiliaries for lamps. Ballasts for discharge lamps (excluding tubular fluorescent lamps). Performance requirements
BS EN 60924
1991
Specification for general and safety requirements for d.c. supplied electronic ballasts for tubular fluorescent lamps
BS EN 60925
1991
Specification for performance requirements for d.c. supplied electronic ballasts for tubular fluorescent lamps
BS EN 60926
1996
Specification for auxiliaries for lamps. Starting devices (other than glow starters). General and safety requirements
BS EN 60927
1997
Specification for auxiliaries for lamps. Starting devices (other than glow starters). Performance requirements
BS EN 60928
1995
Auxiliaries for lamps. a.c. supplied electronic ballasts for tubular fluorescent lamps. General and safety requirements
BS EN 60929
2004
Specification for a.c. supplied electronic ballasts for tubular fluorescent lamps. Performance requirements
BS EN 60931-1
1998
Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1000 V. General. Performance, testing and rating. Safety requirements. Guide for installation and operation
BS EN 60931-2
1996
Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1000 V. Ageing test and destruction test
BS EN 60931-3
1997
Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1000 V. Internal fuses
BS EN 60933-3
1993
Audio, video and audiovisual systems. Interconnections and matching values. Specification for interface for the interconnection of ENG cameras and portable VTRs using non-composite signals, for 625 line/50 field systems
BS EN 60933-5
1993
Audio, video and audiovisual systems. Interconnections and matching values. Specification for Y/C connector for video systems. Electrical matching values and description of the connector
BS EN 60934
2001
Circuit-breakers for equipment (CBE)
BS EN 60936-2
1999
Maritime navigation and radiocommunication equipment and systems. Radar. Shipborne radar for high speed craft (HSC). Methods of testing and required test results
BS EN 60936-3
2002
Maritime navigation and radiocommunication equipment and systems. Radar. Radar with chart facilities. Performance requirements. Methods of testing and required test results
BS EN 60938-1
2000
Fixed inductors for electromagnetic interference suppression. Generic specification
BS EN 60938-2
2000
Fixed inductors for electromagnetic interference suppression. Sectional specification
BS EN 60938-2-1
2000
Fixed inductors for electromagnetic interference suppression. Blank detail specification. Inductors for which safety tests are required. Assessment level D
BS EN 60938-2-2
2000
Fixed inductors for electromagnetic interference suppression. Blank detail specification. Inductors for which safety tests are required (only)
BS EN 60942
2003
Electroacoustics. Sound calibrators
BS EN 60945
2002
Maritime navigation and radiocommunication equipment and systems. General requirements. Methods of testing and required test results
BS EN 60947-1
2004
Specification for low-voltage switchgear and controlgear. General rules
BS EN 60947-2
2003
Specification for low-voltage switchgear and controlgear. Circuit-breakers
BS EN 60947-3
1999
Specification for low-voltage switchgear and controlgear. Switches, disconnectors, switch-disconnectors and fuse-combination units
BS EN 60947-4-1
2001
Specification for low-voltage switchgear and controlgear. Contactors and motor-starters. Electromechanical contactors and motor-starters
BS EN 60947-4-2
2000
Specification for low-voltage switchgear and controlgear. Contactors and motor-starters. A.C. semiconductor motor controllers and starters
BS EN 60947-4-3
1999
Specification for low-voltage switchgear and controlgear. Contactors and motor-starters. Contactors and motor-starters. AC semiconductor controllers and contactors for non-motor loads
BS EN 60947-5-2
1999
Specification for low-voltage switchgear and controlgear. Control circuit devices and switching elements. Proximity switches
BS EN 60947-5-3
1999
Specification for low-voltage switchgear and controlgear. Control circuit devices and switching elements. Requirements for proximity devices with defined behaviour under fault conditions (PDF)
BS EN 60947-5-4
2003
Specification for low-voltage switchgear and controlgear. Control circuit devices and switching elements. Method of assessing the performance of low-energy contacts. Special tests
BS EN 60947-5-5
1998
Specification for low-voltage switchgear and controlgear. Control circuit devices and switching elements. Electrical emergency stop devices with mechanical latching function
BS EN 60947-5-6
2001
Specification for low-voltage switchgear and controlgear. Control circuit devices and switching elements. DC interface for proximity sensors and switching amplifiers (NAMUR)
BS EN 60947-5-7
2003
Specification for low-voltage switchgear and controlgear. Control circuit devices and switching elements. Requirements for proximity devices with analogue output
BS EN 60947-6-1
1992
Specification for low-voltage switchgear and controlgear. Multiple function equipment. Automatic transfer switching equipment
BS EN 60947-6-2
2003
Specification for low-voltage switchgear and controlgear. Multiple function equipment. Control and protective switching devices (or equipment) (CPS)
BS EN 60947-7-2
2002
Specification for low-voltage switchgear and controlgear. Ancillary equipment. Protective conductor terminal blocks for copper conductors
BS EN 60950
2000
Safety of information technology equipment
BS EN 60950-1
2002
Information technology equipment. Safety. General requirements
BS EN 60950-21
2003
Information technology equipment. Safety. Remote power feeding
BS EN 60952-3
2004
Aircraft batteries. External electrical connectors
BS EN 60953-1
1996
Rules for steam turbine thermal acceptance tests. High accuracy for large condensing steam turbines
BS EN 60953-3
2002
Rules for steam turbine thermal acceptance tests. Thermal performance verification tests of retrofitted steam turbines
BS EN 60958-3
2003
Digital audio interface. Consumer applications
BS EN 60958-4
2003
Digital audio interface. Professional applications (TA4)
BS EN 60961
1994
Specification for helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type L
BS EN 60966-1
1999
Radio frequency and coaxial cable assemblies. Generic specification. General requirements and test methods
BS EN 60966-2-1
2003
Radio frequency and coaxial cable assemblies. Sectional specification for flexible coaxial cable assemblies
BS EN 60966-2-2
2003
Radio frequency and coaxial cable assemblies. Blank detail specification for flexible coaxial cable assemblies
BS EN 60966-2-3
2003
Radio frequency and coaxial cable assemblies. Detail specification for flexible coaxial cable assemblies
BS EN 60966-2-4
2003
Radio frequency and coaxial cable assemblies. Detail specification for cable assemblies for radio and TV receivers Frequency range 0 to 3000 MHz, IEC 61169-2 connectors
BS EN 60966-2-5
2003
Radio frequency and coaxial cable assemblies. Detail specification for cable assemblies for radio and TV receivers. Frequency range 0 to 1000 MHz, IEC 61169-2 connectors
BS EN 60966-2-6
2003
Detail specification for cable assemblies for radio and TV receivers. Frequency range 0 to 3000 MHz, IEC 61169-24 connectors
BS EN 60966-3
2003
Radio frequency and coaxial cable assemblies. Sectional specification for semi-flexible coaxial cable assemblies
BS EN 60966-3-1
2003
Radio frequency and coaxial cable assemblies. Blank detail specification for semi-flexible coaxial cable assemblies
BS EN 60966-3-2
2003
Radio frequency and coaxial cable assemblies. Detail specification for semi-flexible coaxial cable assemblies for GSM use (0,8 GHz - 1 GHz)
BS EN 60966-4
2003
Radio frequency and coaxial cable assemblies. Sectional specification for semi-rigid coaxial cable assemblies
BS EN 60966-4-1
2003
Radio frequency and coaxial cable assemblies. Blank detail specification for semi-rigid coaxial cable assemblies
BS EN 60967
1991
Specification for safety of electrically heated blankets, pads and similar flexible heating appliances for household use
BS EN 60968
2000
Specification for self-ballasted lamps for general lighting services. Safety requirements
BS EN 60969
1993
Self-ballasted lamps for general lighting services. Performance requirements
BS EN 60974-1
2005
Arc welding equipment. Welding power sources
BS EN 60974-2
2003
Arc welding equipment. Liquid cooling systems
BS EN 60974-3
2003
Arc welding equipment. Arc striking and stabilizing devices
BS EN 60974-5
2002
Arc welding equipment. Wire feeders
BS EN 60974-6
2003
Arc welding equipment. Limited duty manual metal arc welding power sources
BS EN 60974-7
2005
Arc welding equipment. Torches
BS EN 60974-10
2003
Arc welding equipment. Electromagnetic compatibility (EMC) requirements
BS EN 60974-11
2004
Arc welding equipment. Electrode holders
BS EN 60974-12
2005
Arc welding equipment. Coupling devices for welding cables
BS EN 60976
2001
Medical electrical equipment. Medical electron accelerators. Functional performance characteristics
BS EN 60983
1996
Specification for miniature lamps
BS EN 60990
2000
Methods of measurement of touch current and protective conductor current
BS EN 60993
2002
Electrolyte for vented nickel-cadmium cells
BS EN 60994
1993
Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storage pumps and pump-turbines)
BS EN 60998-1
2004
Connecting devices for low-voltage circuits for household and similar purposes. General requirements
BS EN 60998-2-1
2004
Connecting devices for low voltage circuits for household and similar purposes. Particular requirements for connecting devices as separate entities with screw-type clamping units
BS EN 60998-2-2
2004
Connecting devices for low-voltage circuits for household and similar purposes. Particular requirements for connecting devices as separate entities with screwless-type clamping units
BS EN 60998-2-3
2004
Connecting devices for low-voltage circuits for household and similar purposes. Particular requirements for connecting devices as separate entities with insulation piercing clamping units
BS EN 60998-2-4
2005
Connecting devices for low-voltage circuits for household and similar purposes. Particular requirements for twist-on connecting devices
BS EN 60999-1
2000
Connecting devices. Electrical copper conductors. Safety requirements for screw-type and screwless-type clamping units. General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 (included)
BS EN 60999-2
2003
Connecting devices. Electrical copper conductors. Safety requirements for screw-type and screwless-type clamping units. Particular requirements for clamping units for conductors above 35 mm2 up to 300 mm2 (included)
BS EN 61000-4-30
2003
Electromagnetic compatibility (EMC). Testing and measurement techniques. Power quality measurement methods
BS EN 61000-5-5
1996
Electromagnetic compatibility (EMC). Installation and mitigation guidelines. Specification of protective devices for HEMP conducted disturbance. Basic EMC publication
BS EN 61000-5-7
2001
Electromagnetic compatibility (EMC). Installation and mitigation guidelines. Installation and mitigation guidelines. Degrees of protection by enclosures against electromagnetic disturbances (EM code)
BS EN 61000-6-1
2001
Electromagnetic compatibility (EMC). Generic Standard. Immunity for residential, commercial and light-industrial environments
BS EN 61000-6-2
2005
Electromagnetic compatibility (EMC). Generic Standard. Immunity standard for industrial environments
BS EN 61000-6-3
2001
Electromagnetic compatibility (EMC). Generic Standard. Emission standard for residential, commercial and light-industrial environments
BS EN 61000-6-4
2001
Electromagnetic compatibility (EMC). Generic Standard. Emission standard for industrial environments
BS EN 61000-2-2
2002
Electromagnetic compatibility (EMC). Environment. Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems
BS EN 61000-2-4
2002
Electromagnetic compatibility (EMC). Environment. Compatibility levels in industrial plants for low-frequency conducted disturbances
BS EN 61000-2-9
1996
Electromagnetic compatibility (EMC). Environment. Description of HEMP environment. Radiated disturbance. Basic EMC publication
BS EN 61000-2-10
1999
Electromagnetic compatibility (EMC). Environment. Description of HEMP environment. Conducted disturbance
BS EN 61000-2-12
2003
Electromagnetic compatibility (EMC). Environment. Compatibility levels for low-frequency conducted disturbances and signalling in public medium-voltage power supply systems
BS EN 61000-3-3
1995
Electromagnetic compatibility (EMC). Limits. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ? 16 A per phase and not subject to conditional connection
BS EN 61000-3-11
2001
Electromagnetic compatibility (EMC). Limits. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated voltage current ? 75 A and subject to conditional connection
BS EN 61000-4-1
2001
Electromagnetic compatibility (EMC). Testing and measurement techniques. Overview of IEC 61000-4 series
BS EN 61000-4-4
2004
Electromagnetic compatibility (EMC). Testing and measurement techniques. Electrical fast transient/burst immunity test. Basic EMC publication
BS EN 61000-4-5
1995
Electromagnetic compatibility (EMC). Testing and measurement techniques. Surge immunity test
BS EN 61000-4-7
2002
Electromagnetic compatibility (EMC). Testing and measurement techniques. General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto
BS EN 61000-4-8
1994
Electromagnetic compatibility (EMC). Testing and measurement techniques. Power frequency magnetic field immunity test. Basic EMC publication
BS EN 61000-4-9
1994
Electromagnetic compatibility (EMC). Testing and measurement techniques. Pulse magnetic field immunity test. Basic EMC publication
BS EN 61000-4-10
1994
Electromagnetic compatibility (EMC). Testing and measurement techniques. Damped oscillatory magnetic field immunity test. Basic EMC publication
BS EN 61000-4-11
2004
Electromagnetic compatibility (EMC). Testing and measurement techniques. Voltage dips, short interruptions and voltage variations immunity tests
BS EN 61000-4-12
1996
Electromagnetic compatibility (EMC). Testing and measurement techniques. Oscillatory waves immunity test. Basic EMC publication
BS EN 61000-4-13
2002
Electromagnetic compatibility (EMC). Testing and measurement techniques. Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests
BS EN 61000-4-15
1998
Electromagnetic compatibility (EMC). Testing and measurement techniques. Flickermeter. Functional and design specifications. Basic EMC publication
BS EN 61000-4-16
1998
Electromagnetic compatibility (EMC). Testing and measurement techniques. Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
BS EN 61000-4-17
1999
Electromagnetic compatibility (EMC). Testing and measurement techniques. Ripple on d.c. input power port immunity test
BS EN 61000-4-20
2003
Electromagnetic compatibility (EMC). Testing and measurement techniques. Emission and immunity testing in transverse electromagnetic (TEM) waveguides
BS EN 61000-4-21
2003
Electromagnetic compatibility (EMC). Testing and measurement techniques. Reverberation chamber test methods
BS EN 61000-4-23
2001
Electromagnetic compatibility (EMC). Testing and measurement techniques. Test methods for protective devices for HEMP and other radiated disturbances
BS EN 61000-4-24
1997
Electromagnetic compatibility (EMC). Testing and measurement techniques. Test methods for protective devices for HEMP conducted disturbance. Basic EMC publication
BS EN 61000-4-25
2002
Electromagnetic compatibility (EMC). Testing and measurement techniques. Testing and measurement techniques. HEMP immunity test methods for equipment and systems
BS EN 61000-4-27
2001
Electromagnetic compatibility (EMC). Testing and measurement techniques. Unbalance, immunity test
BS EN 61000-4-28
2000
Electromagnetic compatibility (EMC). Testing and measurement techniques. Variation of power frequency, immunity test
BS EN 61000-4-29
2001
Electromagnetic compatibility (EMC). Testing and measurement techniques. Testing and measurement techniques. Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests
BS EN 61003-1
2004
Industrial-process control systems. Instruments with analogue inputs and two- or multi-state outputs. Methods of evaluating the performance
BS EN 61006
2004
Methods of test for determination of the glass transition temperature of electrical insulating materials
BS EN 61007
1997
Transformers and inductors for use in electronic and telecommunication equipment. Measuring methods and test procedures
BS EN 61008-1
1995
Specification for residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs). General rules
BS EN 61008-2-1
1995
Specification for residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs). Applicability of the general rules to RCCBs functionally independent of line voltage
BS EN 61009-1
2004
Specification for residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs). General rules
BS EN 61009-2-1
1995
Specification for residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs). Applicability of the general rules to RCBOs functionally independent of line voltage
BS EN 61010-2-051
2003
Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for laboratory equipment for mixing and stirring
BS EN 61010-2-061
2003
Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
BS EN 61010-2-081
2002
Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
BS EN 61010-2-101
2002
Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for in vitro diagnostic (IVD) medical equipment
BS EN 61010-031
2002
Safety requirements for electrical equipment for measurement, control and laboratory use. Safety requirements for hand-held probe assemblies for electrical measurement and test
BS EN 61010-1
2001
Safety requirements for electrical equipment for measurement, control and laboratory use. General requirements
BS EN 61010-2-010
2003
Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for laboratory equipment for the heating of material
BS EN 61010-2-020
1995
Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for laboratory centrifuges
BS EN 61010-2-032
1995
Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement
BS EN 61010-2-041
1997
Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for autoclaves using steam for the treatment of medical materials, and for laboratory processes
BS EN 61010-2-042
1997
Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for autoclaves and sterilizers using toxic gas for the treatment of medical materials, and for laboratory processes
BS EN 61010-2-043
1998
Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for dry heat sterilizers using either hot air or hot inert gas for the treatment of medical materials, and for laboratory processes
BS EN 61010-2-045
2001
Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for washer disinfectors used in medical, pharmaceutical, veterinary and laboratory fields
BS EN 61011
1993
Electric fence energizers. Safety requirements for mains-operated electric fence energizers
BS EN 61011-1
1993
Electric fence energizers. Safety requirements for battery-operated electric fence energizers suitable for connection to the supply mains
BS EN 61012
1998
Filters for the measurement of audible sound in the presence of ultrasound
BS EN 61014
2003
Programmes for reliability gStandardth
BS EN 61016
2001
Helical-scan digital component video cassette recording system using 19 mm magnetic tape (format D-1)
BS EN 61019-2
2005
Surface acoustic wave (SAW) resonators. Guide to the use
BS EN 61021-1
1997
Laminated core packages for transformers and inductors for use in telecommunication and electronic equipment. Specification for dimensions
BS EN 61021-2
1997
Laminated core packages for transformers and inductors for use in telecommunication and electronic equipment. Electrical characteristics for cores using YEE 2 laminations
BS EN 61023
2000
Marine speed and distance measuring equipment (SDME). Operational and performance requirements. Methods of testing and required test results
BS EN 61027
1993
Specification for instruments for the measurement of aural acoustic impedance/admittance
BS EN 61028
1993
Specification for electrical measuring instruments. X-Y recorders
BS EN 61029-1
2000
Safety of transportable motor-operated tools. General requirements
BS EN 61029-2-4
2004
Safety of transportable motor-operated tools. Particular requirements for bench grinders
BS EN 61029-2-5
2002
Safety of transportable motor-operated tools. Particular requirements for band saws
BS EN 61029-2-8
2003
Safety of transportable motor-operated tools. Particular requirements for single spindle vertical moulders
BS EN 61029-2-9
2002
Safety of transportable motor-operated tools. Particular requirements for mitre saws
BS EN 61029-2-11
2003
Safety of transportable motor-operated tools. Particular requirements for combined mitre and bench saws
BS EN 61030
1993
Specification for domestic digital bus (D2B) for audio, video and audiovisual systems
BS EN 61032
1998
Protection of persons and equipment by enclosures. Probes for verification
BS EN 61036
1997
Alternating current static watt-hour meters for active energy (classes 1 and 2)
BS EN 61037
1993
Electricity metering. Tarriff and load control. Particular requirements for electronic ripple control receivers
BS EN 61038
1993
Specification for time switches for tariff and load control
BS EN 61040
1993
Specification for power and energy measuring detectors, instruments and equipment for laser radiation
BS EN 61041-1
1995
Non-broadcast video tape recorders. Methods of measurement. General video (NTSC/PAL) and audio (longitudinal) characteristics
BS EN 61041-2
1996
Non-broadcast video tape recorders. Methods of measurement. Video characteristics chrominance SECAM
BS EN 61041-4
1998
Non-broadcast video tape recorders. Methods of measurement. Calibration tape (NTSC/PAL/SECAM)
BS EN 61041-5
1998
Non-broadcast video tape recorders. Methods of measurement. High-band video tape recorders, including those equipped with Y/C video connectors (NTSC/PAL)
BS EN 61043
1994
Specification for electroacoustics. Instruments for the measurement of sound intensity. Measurement with pairs of pressure sensing microphones
BS EN 61044
1993
Opportunity-charging of lead-acid traction batteries
BS EN 61046
1995
Specification for d.c. or a.c. supplied electronic step-down convertors for filament lamps. General and safety requirements
BS EN 61048
1993
Specification for capacitors for use in tubular fluorescent and other discharge lamp circuits. General and safety requirements
BS EN 61049
1993
Specification for capacitors for use in tubular fluorescent and other discharge lamp circuits. Performance requirements
BS EN 61050
1992
Specification for transformers for tubular discharge lamps having a no-load output voltage exceeding 1000 V (generally called neon-transformers). General and safety requirements
BS EN 61056-1
2003
Portable lead-acid cells and batteries (valve-regulated types). General requirements, functional characteristics. Methods of test
BS EN 61056-2
2003
Portable lead-acid cells and batteries (valve-regulated types). Dimensions, terminals and marking
BS EN 61058-1
2002
Switches for appliances. General requirements
BS EN 61058-2-1
1993
Switches for appliances. Particular requirements. Cord switches
BS EN 61058-2-5
1995
Switches for appliances. Particular requirements. Change-over selectors
BS EN 61061-1
1998
Non-impregnated densified laminated wood for electrical purposes. Definitions, designations and general requirements
BS EN 61061-2
2001
Non-impregnated densified laminated wood for electrical purposes. Methods of test
BS EN 61061-3-1
1998
Non-impregnated densified laminated wood for electrical purposes. Specification for individual materials. Sheets produced from beech veneer
BS EN 61061-3-2
2002
Non-impregnated densified laminated wood for electrical purposes. Specification for individual materials. Rings produced from beech veneer
BS EN 61063
1996
Acoustics. Measurement of airborne noise emitted by steam turbines and driven machinery
BS EN 61064
1993
Guide to acceptance tests for steam turbine speed control systems
BS EN 61065
1993
Method for evaluating the low temperature flow properties of mineral insulating oils after ageing
BS EN 61067-1
1997
Glass and glass polyester fibre woven tapes. Definitions, classification and general requirements
BS EN 61067-2
1997
Glass and glass polyester fibre woven tapes. Methods of test
BS EN 61067-3-1
1995
Glass and glass polyester fibre woven tapes. Specifications for individual materials. Type 1, 2 and 3 tapes
BS EN 61068-2
1997
Polyester fibre woven tapes. Methods of test
BS EN 61069-5
1995
Industrial-process measurement and control. Evaluation of system properties for the purpose of system assessment. Assessment of system dependability
BS EN 61069-6
1998
Industrial-process measurement and control. Evaluation of system properties for the purpose of system assessment. Assessment of system operability
BS EN 61069-7
1999
Industrial-process measurement and control. Evaluation of system properties for the purpose of system assessment. Assessment of system safety
BS EN 61069-8
1999
Industrial-process measurement and control. Evaluation of system properties for the purpose of system assessment. Assessment of non-task related system properties
BS EN 61069-1
1993
Industrial-process measurement and control. Evaluation of system properties for the purpose of system assessment. General considerations and methodology
BS EN 61069-2
1994
Industrial-process measurement and control. Evaluation of system properties for the purpose of system assessment. Assessment methodology
BS EN 61069-3
1997
Industrial-process measurement and control. Evaluation of system properties for the purpose of system assessment. Assessment of system functionality
BS EN 61069-4
1998
Industrial-process measurement and control. Evaluation of system properties for the purpose of system assessment. Assessment of system performance
BS EN 61071-1
1997
Power electronic capacitors. General
BS EN 61073-1
2000
Mechanical splices and fusion splice protectors for optical fibres and cables. Generic specification
BS EN 61074
1993
Method of test for determination of heats and temperatures of melting and crystallization of electrical insulating materials by differential scanning calorimetry
BS EN 61075
1993
Loran-C receivers for ships. Minimum performance Standard. Methods of testing and required test results
BS EN 61076-4-113
2003
Connectors for electronic equipment. Printed board connectors with assessed quality. Detail specification for two-part connectors having 5 Standards with a grid of 2,54 mm for printed boards and backplanes in bus applications
BS EN 61076-4-114
2003
Connectors for electronic equipment. Printed board connectors with assessed quality. Detail specification for two-part connector with integrated shielding function having a grid of 1 mm x 1,5 mm
BS EN 61076-4-115
2003
Connectors for electronic equipment. Printed board connectors with assessed quality. Backplane connector for InfiniBand equipment
BS EN 61076-5
2001
Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. In-line sockets with assessed quality. Sectional specification
BS EN 61076-7
2001
Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Cable outlet accessories with assessed quality, including qualification and capability approval. Sectional specification
BS EN 61076-1
1996
Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Generic specification
BS EN 61076-2
1999
Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Circular connectors with assessed quality. Sectional specification
BS EN 61076-2-001
2002
Connectors for electronic equipment. Circular connectors. Blank detail specification
BS EN 61076-2-101
2003
Connectors for electronic equipment. Circular connectors. Detail specification for circular connectors M8 with screw- or snap-locking, M12 with screw-locking for low voltage applications
BS EN 61076-2-102
2002
Connectors for electronic equipment. Circular connectors. Circular connectors with assessed quality. Detail specification for plugs and jacks for external low voltage power supply
BS EN 61076-3
2000
Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Rectangular connectors with assessed quality. Sectional specification
BS EN 61076-3-001
2000
Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Rectangular connectors. Blank detail specification
BS EN 61076-3-101
1998
Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Rectangular connectors. Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rectang
BS EN 61076-3-103
2004
Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Rectangular connectors. Detail specification for single Standard connectors with non-removable ribbon cable contacts on 1,25 mm pitch used fo
BS EN 61076-3-104
2003
Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Rectangular connectors. Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to
BS EN 61076-4
1997
Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Sectional specification. Printed board connectors
BS EN 61076-4-001
1997
Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors. Blank detail specification
BS EN 61076-4-100
2002
Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors. Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes
BS EN 61076-4-101
2001
Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors. Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and back
BS EN 61076-4-102
1997
Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors. Detail specification for two-part single-pole connectors, for multiple uses on plug-in units, with pre-centrin
BS EN 61076-4-103
1999
Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors. Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm
BS EN 61076-4-104
1999
Connectors for electronic equipment. Printed board connectors with assessed quality. Detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on a multiple grid of 0,5 mm
BS EN 61076-4-105
1998
Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors. Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide range of applications
BS EN 61076-4-107
2001
Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors. Detail specification for shielded two-part connectors having a basic grid of 2,0 mm, fixed part with solder an
BS EN 61076-4-108
2002
Connectors for electronic equipment. Printed board connectors with assessed quality. Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, h
BS EN 61076-4-110
2002
Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors. Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding
BS EN 61076-4-111
2002
Connectors for electronic equipment. Printed board connectors with assessed quality. Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 mm in accordance
BS EN 61077
1992
Specification for helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS. Compact VHS video cassette
BS EN 61078
1994
Reliability of systems, equipment and components. Guide to the block diagram technique
BS EN 61079-1
1995
Methods of measurement on receivers for satellite broadcast transmissions in the 12 GHz band. Radio-frequency measurements on outdoor units
BS EN 61079-2
1995
Methods of measurement on receivers for satellite broadcast transmissions in the 12 GHz band. Electrical measurements on DBS tuner units
BS EN 61079-3
1995
Methods of measurement on receivers for satellite broadcast transmissions in the 12 GHz band. Electrical measurements of overall performance of receiver systems comprising an outdoor unit and a DBS tuner unit
BS EN 61079-5
1995
Methods of measurement on receivers for satellite broadcast transmissions in the 12 GHz band. Electrical measurements on decoder units for MAC/packet systems
BS EN 61082-1
1993
Preparation of documents used in electrotechnology. General requirements
BS EN 61082-2
1994
Preparation of documents used in electrotechnology. Function-oriented diagrams
BS EN 61082-3
1994
Preparation of documents used in eletrotechnology. Connection diagrams, tables and lists
BS EN 61082-4
1996
Preparation of documents used in electrotechnology. Location and installation documents
BS EN 61083-1
2001
Digital recorders for measurements in high-voltage impulse tests. Requirements for instruments
BS EN 61086-1
2004
Specification for loaded printed wire boards (conformal coatings). Definitions, classification and general requirements
BS EN 61086-2
2004
Specification for loaded printed wire boards (conformal coatings). Methods of test
BS EN 61094-1
2001
Specification for measurement microphones. Specifications for laboratory standard microphones
BS EN 61094-2
1994
Specification for measurement microphones. Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique
BS EN 61094-3
1996
Specification for measurement microphones. Primary method for free-field calibration of laboratory standard microphones by the reciprocity technique
BS EN 61094-4
1996
Specification for measurement microphones. Specifications for working standard microphones
BS EN 61094-5
2002
Measurement microphones. Methods for pressure calibration of working standard microphones by comparison
BS EN 61095
1993
Specification for electromechanical contactors for household and similar purposes
BS EN 61096
1993
Methods of measuring the characteristics of reproducing equipment for digital audio compact discs
BS EN 61097-1
1993
Global maritime distress and safety system (GMDSS). Radar transponder. Marine search and rescue (SART). Operational and performance requirements, methods of testing and required test results
BS EN 61099
1992
Specification for unused synthetic organic esters for electrical purposes
BS EN 61100
1993
Classification of insulating liquids according to fire point and net calorific value
BS EN 61101
1994
Specification for absolute calibration of hydrophones using the planar scanning technique in the frequency range 0,5 MHz to 15 MHz
BS EN 61102
1994
Specification for measurement and characterisation of ultrasonic fields using hydrophones in the frequency range 0.5 MHz to 15 MHz
BS EN 61104
1993
Compact disc video system. 12 cm CD-V
BS EN 61105
1994
Specification for reference tapes for video tape recorder systems
BS EN 61106
1993
Videodisks. Methods of measurement for parameters
BS EN 61107
1996
Data exchange for meter reading, tariff and load control. Direct local data exchange
BS EN 61108-1
2003
Global navigation satellite systems (GNSS). Global positioning system (GPS). Receiver equipment. Performance Standard, methods of testing and required test results
BS EN 61108-2
1998
Global navigation satellite systems (GNSS). Global navigation satellite systems (GLONASS). Receiver equipment. Performance Standard, methods of testing and required test results
BS EN 61110
1992
System Omega and differential Omega receivers for ships. Operational and performance requirements. Methods of testing and required test results
BS EN 61114-1
1995
Methods of measurement on receiving antennas for satellite broadcast transmissions in the 12 GHz band. Electrical measurements
BS EN 61114-2
1997
Methods of measurement on receiving antennas for satellite broadcast transmissions in the 12 GHz band. Mechanical and environmental tests on individual and collective receiving antennas
BS EN 61115
1994
Expression of performance of sample handling systems for process analyzers
BS EN 61116
1995
Electromechanical equipment guide for small hydroelectric installations
BS EN 61118
1994
Specification for helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape. Type M2
BS EN 61119-5
1995
Digital audio tape cassette system (DAT). DAT for professional use
BS EN 61120-1
1993
Digital audio tape recorder reel to reel system, using 6,3 mm magnetic tape, for professional use. General requirements
BS EN 61120-2
1994
Digital audio tape recorder reel to reel system, using 6,3 mm magnetic tape, for professional use. Format A
BS EN 61120-3
1994
Digital audio tape recorder reel to reel system, using 6,3 mm magnetic tape, for professional use. Format B
BS EN 61120-4
1993
Digital audio tape recorder reel to reel system, using 6,3 mm magnetic tape for professional use. Magnetic tape properties: definitions and methods of measurement
BS EN 61120-5
1996
Digital audio tape recorder reel to reel system, using 6,3 mm magnetic tape, for professional use. Reels
BS EN 61121
1999
Tumble dryers for household use. Methods for measuring the performance
BS EN 61122
1994
Specification for still video floppy disk magnetic recording system
BS EN 61125
1993
Unused hydrocarbon-based insulating liquids. Test methods for evaluating the oxidation stability
BS EN 61129
1994
Specification for alternating current earthing switches. Induced current switching
BS EN 61131-1
2003
Programmable controllers. General information
BS EN 61131-2
2003
Programmable controllers. Equipment requirements and tests
BS EN 61131-3
2003
Programmable controllers. Programming languages
BS EN 61131-5
2000
Programmable controllers. Communications
BS EN 61131-7
2001
Programmable controllers. Fuzzy control programming
BS EN 61135
1994
Decca Navigator system:Receivers for ships. Minimum performance Standard. Methods of testing and required test results
BS EN 61136-1
1998
Semiconductor power convertors. Adjustable speed electric drive systems. General requirements. Rating specifications, particularly for d.c. motor drives
BS EN 61138
1994
Cables for portable earthing and short-circuiting equipment
BS EN 61140
2002
Protection against electric shock. Common aspects for installation and equipment
BS EN 61142
1993
Data exchange for meter reading, tariff and load control. Local bus data exchange
BS EN 61143-1
1994
Specification for electrical measuring instruments. X-t recorders. Definitions and requirements
BS EN 61144
1993
Test method for the determination of oxygen index of insulating liquids
BS EN 61146-1
1997
Video cameras (PAL/SECAM/NTSC). Method of measurement. Non-broadcast single-sensor cameras
BS EN 61146-2
1997
Video cameras (PAL/SECAM/NTSC). Method of measurement. Two- and three-sensor professional cameras
BS EN 61146-3
1997
Video cameras (PAL/SECAM/NTSC). Method of measurement. Non-broadcast camera-recorders
BS EN 61150
1994
Alkaline secondary cells and batteries. Sealed nickel-cadmium rechargeable monobloc batteries in button cell design
BS EN 61152
1994
Specification for dimensions of metal-sheathed thermometer elements
BS EN 61157
1995
Requirements for the declaration of the acoustic output of medical diagnostic ultrasonic equipment
BS EN 61158-2
2004
Fieldbus standard for use in industrial control systems. Physical layer specification and service definition
BS EN 61161
1995
Specification for ultrasonic power measurement in liquids in the frequency range 0.5 MHz to 25 MHz
BS EN 61162-1
2001
Maritime navigation and radiocommunication equipment and systems. Digital interfaces. Single talker and multiple listeners
BS EN 61162-2
1999
Maritime navigation and radiocommunication equipment and systems. Digital interfaces. Single talker and multiple listeners, high-speed transmission
BS EN 61162-400
2002
Maritime navigation and radiocommunication equipment and systems. Digital interfaces. Multiple talkers and multiple listeners. Ship systems interconnection. Introduction and general principles
BS EN 61162-401
2002
Maritime navigation and radiocommunication equipment and systems. Digital interfaces. Multiple talkers and multiple listeners. Ship systems interconnection. Application profile
BS EN 61162-410
2002
Maritime navigation and radiocommunication equipment and systems. Digital interfaces. Multiple talkers and multiple listeners. Ship systems interconnection. Transport profile requirements and basic transport profile
BS EN 61162-420
2002
Maritime navigation and radiocommunication equipment and systems. Digital interfaces. Multiple talkers and multiple listeners. Ship systems interconnection. Companion standard requirements and basic companion Standard
BS EN 61166
1993
Specification for high-voltage alternating current circuit-breakers. Guide for seismic qualification of high-voltage alternating current circuit-breakers
BS EN 61167
1995
Specification for metal halide lamps
BS EN 61168
1994
Medical electrical equipment. Particular requirements for performance. Methods of declaring functional performance characteristics of radiotherapy simulators
BS EN 61169-1
1996
Radio-frequency connectors. Generic specification. General requirements and measuring methods
BS EN 61169-1-1
1997
Radio-frequency connectors. Single, multi-series, dual-language blank detail specification
BS EN 61169-2
2002
Radio-frequency connectors. Sectional specification. Radio frequency coaxial connectors of type 9,52
BS EN 61169-24
2002
Radio-frequency connectors. Sectional specification. Radio frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (type F)
BS EN 61169-31
2000
Radio-frequency connectors. RF coaxial connectors with inner diameter of outer conductor 1,0 mm (0,039 in) with screw coupling. Characteristic impedance 50 ohms (type 1,0)
BS EN 61169-32
2000
Radio-frequency connectors. RF coaxial connectors with inner diameter of outer conductor 1,85 mm (0,072 in) with screw coupling. Characteristic impedance 50 ohms (type 1,85)
BS EN 61169-33
1997
Radio-frequency connectors. Sectional specification for series BMA r.f. connectors
BS EN 61169-36
1997
Radio-frequency connectors. Microminiature r.f. coaxial connectors with snap-on coupling. Characteristic impedance 50 ohms (type MCX)
BS EN 61173
1995
Overvoltage protection for photovoltaic (PV) power generating systems. Guide
BS EN 61174
2001
Maritime navigation and radiocommunication equipment and systems. Electronic chart display and information system (ECDIS). Operational and performance requirements, methods of testing and required test results
BS EN 61175
1993
Designations for signals and connections
BS EN 61176
1994
Hand-held electric mains voltage operated circular saws. Methods for measuring the performance
BS EN 61179
1993
Specification for helical-scan digital composite video cassette recording system using 19 mm magnetic tape, format D2 (NTSC, PAL, PAL-M)
BS EN 61180-1
1995
High-voltage test techniques for low-voltage equipment. Definitions, test and procedure requirements
BS EN 61180-2
1995
High-voltage test techniques for low-voltage equipment. Test equipment
BS EN 61181
1993
Impregnated insulating materials. Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
BS EN 61182-7
1996
Printed boards. Electronic data description and transfer. Bare board electric test information in digital form
BS EN 61183
1995
Electroacoustics. Random-incidence and diffuse-field calibration of sound level meters
BS EN 61184
1997
Bayonet lampholders
BS EN 61185
2005
Magnetic oxide cores. (ETD-cores) intended for use in power supply applications. Dimensions
BS EN 61187
1996
Electrical and electronic measuring equipment. Documentation
BS EN 61188-1-1
1997
Printed boards and assemblies. Design and use. Generic requirements. Flatness considerations for electronic assemblies
BS EN 61188-1-2
1998
Printed boards and assemblies. Design and use. Generic requirements. Generic requirements. Controlled impedance
BS EN 61188-5-1
2002
Printed boards and assemblies. Design and use. Attachment (land/joint) considerations. Attachment (land/joint) considerations. Generic requirements
BS EN 61188-5-2
2003
Printed boards and assemblies. Design and use. Attachment (land/joint) considerations. Discrete components
BS EN 61188-5-6
2003
Printed boards and assemblies. Design and use. Attachment (land/joint) considerations. Chip carriers with J-leads on four sides
BS EN 61190-1-1
2002
Attachment materials for electronic assembly. Requirements for soldering fluxes for high-quality interconnections in electronics assembly
BS EN 61190-1-2
2002
Attachment materials for electronic assembly. Requirements for solder pastes for high-quality interconnections in electronic assembly
BS EN 61190-1-3
2002
Attachment materials for electronic assembly. Requirements for electronic grade solder alloys and fluxed and non-fluxed solid solders for electronic soldering applications
BS EN 61191-1
1999
Printed board assemblies. Generic specification. Requirements for soldered electrical and electronic assemblies using surface mount and related assembly technologies
BS EN 61191-2
1999
Printed board assemblies. Sectional specification. Requirements for surface mount soldered assemblies
BS EN 61191-3
1999
Printed board assemblies. Sectional specification. Requirements for through-hole mount soldered assemblies
BS EN 61191-4
1999
Printed board assemblies. Sectional specification. Requirements for terminal soldered assemblies
BS EN 61192-1
2003
Workmanship requirements for soldered electronic assemblies. General
BS EN 61192-2
2003
Workmanship requirements for soldered electronic assemblies. Surface-mount assemblies
BS EN 61192-3
2003
Workmanship requirements for soldered electronic assemblies. Through-hole mount assemblies
BS EN 61192-4
2003
Workmanship requirements for soldered electronic assemblies. Terminal assemblies
BS EN 61193-1
2002
Quality assessment systems. Registration and analysis of defects on printed board assemblies
BS EN 61194
1996
Characteristic parameters of stand-alone photovoltaic (PV) systems
BS EN 61196-3-2
1998
Radio-frequency cables. Specifications. Coaxial cables for digital communication in horizontal floor wiring. Detail specification for coaxial cables with solid dielectric for local area networks of 185 m reach and up to 10 Mb/s
BS EN 61196-3-3
1998
Radio-frequency cables. Specifications. Coaxial cables for digital communication in horizontal floor wiring. Detail specification for coaxial cables with foamed dielectric for local area networks of 185 m reach and up to 10 Mb/s
BS EN 61196-2
2003
Radio-frequency cables. Specifications. Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation
BS EN 61196-3
1999
Radio-frequency cables. Specifications. Sectional specification for coaxial cables for local area networks
BS EN 61197
1996
Insulating liquids. Linear flame propagation. Test method using a glass-fibre tape
BS EN 61198
1994
Mineral insulating oils. Methods for the determination of 2-furfural and related compounds
BS EN 61199
2000
Single-capped fluorescent lamps. Safety specifications
BS EN 61202-1
2000
Fibre optic isolators. Generic specification
BS EN 61203
1995
Synthetic organic esters for electrical purposes. Guide for maintenance of transformer esters in equipment
BS EN 61204
1995
Low-voltage power supply devices, d.c. output. Performance characteristics and safety requirements
BS EN 61204-3
2001
Low voltage power supplies, d.c. output. Electromagnetic compatibility (EMC)
BS EN 61204-6
2001
Low voltage power supplies, d.c. output. Requirements for low-voltage power supplies of assessed performance
BS EN 61205
1994
Specification for ultrasonics. Dental descaler systems. Measurement and declaration of the output characteristics
BS EN 61206
1995
Ultrasonics. Continuous-wave Doppler systems. Test procedures
BS EN 61207-1
1994
Expression of performance of gas analyzers. General
BS EN 61207-3
2002
Expression of performance of gas analyzers. Paramagnetic oxygen analyzers
BS EN 61209
1999
Maritime navigation and radiocommunication equipment and systems. Integrated bridge systems (IBS). Operational and performance requirements, methods of testing and required test results
BS EN 61210
1995
Connecting devices. Flat quick-connect terminations for electrical copper conductors. Safety requirements
BS EN 61212-1
1996
Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. General requirements
BS EN 61212-2
1996
Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Methods of test
BS EN 61213
1994
Analogue audio recording on video tape. Polarity of magnetization
BS EN 61215
2005
Crystalline silicon terrestrial photovoltaic (PV) modules. Design qualification and type approval
BS EN 61219
1994
Live working. Earthing or earthing and short-circuiting equipment using lances as a short-circuiting device. Lance earthing
BS EN 61220
1995
Ultrasonics. Fields. Guidance for the measurement and characterization of ultrasonic fields generated by medical ultrasonic equipment using hydrophones in the frequency range 0.5 MHz to 15 MHz
BS EN 61221
2004
Petroleum products and lubricants. Triaryl phosphate ester turbine control fluids (category ISO-L-TCD). Specifications
BS EN 61223-2-5
1995
Evaluation and routine testing in medical imaging departments. Constancy tests. Method for image display devices
BS EN 61223-3-1
1999
Evaluation and routine testing in medical imaging departments. Acceptance tests. Imaging performance of X-ray equipment for radiographic and radioscopic systems
BS EN 61223-3-2
1997
Evaluation and routine testing in medical imaging departments. Acceptance tests. Imaging performance of mammographic X-ray equipment
BS EN 61223-3-3
1997
Evaluation and routine testing in medical imaging departments. Acceptance tests. Imaging performance of X-ray equipment for digital subtraction angiography (DSA)
BS EN 61223-3-4
2000
Evaluation and routine testing in medical imaging departments. Acceptance tests. Imaging performance of dental X-ray equipment
BS EN 61228
1997
Method of measuring and specifying the UV radiation of ultraviolet lamps used for sun-tanning
BS EN 61230
1996
Live working. Portable equipment for earthing or earthing and short-circuiting
BS EN 61232
1997
Aluminium-clad steel wires for electrical purposes
BS EN 61234-2
1998
Method of test for hydrolytic stability of electrical insulating materials. Moulded thermosets
BS EN 61235
1995
Live working. Insulating hollow tubes for electrical purposes
BS EN 61236
1995
Saddles, pole clamps (stick clamps) and accessories for live working
BS EN 61237-2
1995
Broadcast video tape recorders. Methods of measurement. Electrical measurements of analogue composite video signals
BS EN 61237-3
1995
Broadcast video tape recorders. Methods of measurement. Electrical measurements for analogue component video signals
BS EN 61237-4
1998
Broadcast video tape recorders. Methods of measurement. Analogue audio performance measurements
BS EN 61238-1
2003
Compression and mechanical connectors for power cables for rated voltages up to 36 kV (Um
BS EN 61240
1997
Piezoelectric devices. Preparation of outline drawings of surface-mounted devices (SMD) for frequency control and selection. General rules
BS EN 61242
1998
Electrical accessories. Cable reels for household and similar purposes
BS EN 61243-1
2005
Live working. Voltage detectors. Capacitive type to be used for voltages exceeding 1 kV a.c.
BS EN 61243-2
1998
Live working. Voltage detectors. Resistive type to be used for voltages of 1 kV to 36 kV a.c.
BS EN 61243-5
2001
Live working. Voltage detectors. Voltage detecting systems (VDS)
BS EN 61247
1997
PM-cores made of magnetic oxides and associated parts. Dimensions
BS EN 61248-1
1997
Transformers and inductors for use in electronic and telecommunication equipment. Generic specification
BS EN 61248-2
1997
Transformers and inductors for use in electronic and telecommunication equipment. Sectional specification for signal transformers on the basis of the capability approval procedure
BS EN 61248-3
1997
Transformers and inductors for use in electronic and telecommunication equipment. Sectional specification for power transformers on the basis of the capability approval procedure
BS EN 61248-4
1997
Transformers and inductors for use in electronic and telecommunication equipment. Sectional specification for power transformers for switched mode power supplies (SMPS) on the basis of the capability approval procedure
BS EN 61248-5
1997
Transformers and inductors for use in electronic and telecommunication equipment. Sectional specification for pulse transformers on the basis of the capability approval procedure
BS EN 61248-6
1997
Transformers and inductors for use in electronic and telecommunication equipment. Sectional specification for inductors on the basis of the capability approval procedure
BS EN 61248-7
1998
Transformers and inductors for use in electronic and telecommunication equipment. Sectional specification for high-frequency inductors and intermediate transformers on the basis of the capability approval procedure
BS EN 61249-2-4
2002
Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and unclad. Polyester non-woven/woven fibreglass laminated sheet of defined flammability (vertical burning test), copper-clad
BS EN 61249-2-5
2003
Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and unclad. Brominated epoxide cellulose paper reinforced core/woven E-glass reinforced surfaces laminated sheets of defined flammability (vertical b
BS EN 61249-2-6
2003
Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and unclad. Brominated epoxide non-woven/woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad
BS EN 61249-2-7
2002
Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and unclad. Epoxide woven E-glass laminated sheet of defined flammability (vertical burning test), copper-clad
BS EN 61249-2-8
2003
Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and unclad. Reinforced base materials clad and unclad. Modified brominated epoxide woven fibreglass reinforced laminated sheets of defined flammabili
BS EN 61249-2-9
2003
Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and unclad. Reinforced base materials clad and unclad. Bismaleimide/triazine, modified epoxide or unmodified, woven E-glass reinforced laminated shee
BS EN 61249-2-10
2003
Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and unclad. Reinforced base materials clad and unclad. Cyanate ester, brominated epoxide, modified or unmodified, woven E-glass reinforced laminated
BS EN 61249-2-11
2003
Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and unclad. Polyimide, brominated epoxide modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning
BS EN 61249-2-12
1999
Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and unclad. Epoxide non-woven aramid laminate of defined flammability, copper-clad
BS EN 61249-2-13
1999
Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and unclad. Cyanate ester non-woven aramid laminate of defined flammability, copper-clad
BS EN 61249-2-18
2002
Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and unclad. Polyester non-woven fibreglass reinforced laminated sheet of defined flammability (vertical burning test), copper clad
BS EN 61249-2-19
2002
Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and unclad. Epoxide cross-plied linear fibreglass-reinforced laminated sheets of defined flammability (vertical burning test) copper clad
BS EN 61249-2-21
2003
Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and unclad. Non-halogenated epoxide woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad
BS EN 61249-3-3
1999
Materials for interconnection structures. Sectional specification set for unreinforced base materials, clad and unclad (intended for flexible printed boards). Adhesive coated flexible polyester film
BS EN 61249-3-4
1999
Materials for interconnection structures. Sectional specification set for unreinforced base materials, clad and unclad (intended for flexible printed boards). Adhesive coated flexible polyimide film
BS EN 61249-3-5
1999
Materials for interconnection structures. Sectional specification set for unreinforced base materials, clad and unclad (intended for flexible printed boards). Transfer adhesive films for flexible printed boards
BS EN 61249-5-1
1996
Materials for interconnection structures. Sectional specification set for conductive foils and films with and without coatings. Copper foils (for the manufacture of copper-clad base materials)
BS EN 61249-5-4
1997
Materials for interconnection structures. Sectional specification set for conductive foils and films with and without coatings. Conductive inks
BS EN 61249-7-1
1996
Materials for interconnection structures. Sectional specification set for restraining core materials. Copper/invar/copper
BS EN 61249-8-7
1997
Materials for interconnection structures. Sectional specification set for non-conductive films and coatings. Marking legend inks
BS EN 61249-8-8
1997
Materials for interconnection structures. Sectional specification set for non-conductive films and coatings. Temporary polymer coatings
BS EN 61252
1997
Electroacoustics. Specifications for personal sound exposure meters
BS EN 61254
1994
Electric shavers for household use. Methods for measuring the performance
BS EN 61255
1995
Household electric heating pads. Methods for measuring performance
BS EN 61259
1995
Gas-insulated metal-enclosed switchgear for rated voltages 72,5 kV and above. Requirements for switching of bus-charging currents by disconnectors
BS EN 61262-1
1995
Characteristics of electro-optical X-ray image intensifiers for medical electrical equipment. Determination of the entrance field size
BS EN 61262-2
1995
Characteristics of electro-optical X-ray image intensifiers for medical electrical equipment. Determination of the conversion factor
BS EN 61262-3
1995
Characteristics of electro-optical X-ray image intensifiers for medical electrical equipment. Determination of the luminance distribution and luminance non-uniformity
BS EN 61262-4
1995
Characteristics of electro-optical X-ray image intensifiers for medical electrical equipment. Determination of the image distortion
BS EN 61262-5
1995
Characteristics of electro-optical X-ray image intensifiers for medical electrical equipment. Determination of the detective quantum efficiency
BS EN 61262-6
1995
Characteristics of electro-optical X-ray image intensifiers for medical electrical equipment. Determination of the contrast ratio and veiling glare index
BS EN 61262-7
1996
Characteristics of electro-optical X-ray image intensifiers for medical electrical equipment. Determination of the modulation transfer function
BS EN 61264
1999
Ceramic pressurized hollow insulators for high-voltage switchgear and controlgear
BS EN 61265
1995
Electroacoustics. Instruments for measurement of aircraft noise. Performance requirements for systems to measure one-third-octave band sound pressure levels in noise certification of transport-category aircraft
BS EN 61266
1995
Ultrasonics. Hand-held probe Doppler foetal heartbeat detectors. Performance requirements and methods of measurement and reporting
BS EN 61267
1995
Radiation conditions for use in the determination of characteristics for medical diagnostic X-ray equipment
BS EN 61268
1996
Alternating current static var-hour meters for reactive energy (classes 2 and 3)
BS EN 61269-1
1997
Fibre optic terminus sets. Generic specification
BS EN 61269-1-1
1997
Fibre optic terminus sets. Blank detail specification
BS EN 61270-1
1998
Capacitors for micStandardave ovens. General
BS EN 61274-1
1997
Fibre optic adaptors. Generic specification
BS EN 61274-1-1
1997
Fibre optic adaptors. Blank detail specification
BS EN 61277
1998
Terrestial photovoltaic (PV) power generating systems. General and guide
BS EN 61280-1-1
1998
Optical fibre amplifiers.Basic spectrum analyzers. Transmitter output optical power measurement for single-mode optical fibre cable
BS EN 61280-1-3
1999
Fibre optic communication subsystem basic test procedures. Test procedures for general communication subsystems. Central wavelength and spectral width measurement
BS EN 61280-1-4
2003
Fibre optic communication subsystem basic test procedures. Test procedures for general communication subsystems. Collection and reduction of two-dimensional nearfield data for multimode fibre laser transmitters
BS EN 61280-2-1
1999
Fibre optic communication subsystem basic test procedures. Test procedures for digital systems. Receiver sensitivity and overload measurement
BS EN 61280-2-4
1998
Fibre optic communication subsystem basic test procedures. Test procedures for digital systems. Bit-rate tolerance measurement
BS EN 61280-2-5
1998
Fibre optic communication subsystem basic test procedures. Test procedures for digital systems. Jitter transfer function measurement
BS EN 61280-2-8
2003
Fibre optic communication subsystem basic test procedures. Test procedures for digital systems. Determination of low BER using Q-factor measurements
BS EN 61280-2-9
2002
Fibre optic communication subsystem basic test procedures. Test procedures for digital systems. Optical signal-to-noise ratio measurement for dense wavelength-division multiplexed systems
BS EN 61280-4-2
2000
Fibre optic communication subsystem basic test procedures. Fibre optic cable plant. Single-mode fibre optic cable plant attenuation
BS EN 61281-1
1999
Fibre optic communication subsystems. Generic specification
BS EN 61284
1998
Overhead lines. Requirements and tests for fittings
BS EN 61285
2004
Industrial-process control. Safety of analyser houses
BS EN 61286
2002
Information technology. Coded graphic character set for use in the preparation of documents used in electrotechnology and for information interchange
BS EN 61290-1-1
1998
Optical spectrum analyzer
BS EN 61290-1-2
1998
Optical fibre amplifiers. Basic specification. Test methods for gain parameters. Electrical spectrum analyzer
BS EN 61290-1-3
1998
Optical fibre amplifiers.Basic spectrum analyzers. Optical power meter
BS EN 61290-2-1
1998
Optical fibre amplifiers. Basic specification. Test methods for optical power parameters. Optical spectrum analyzer
BS EN 61290-2-2
1998
Optical fibre amplifiers. Basic specification. Test methods for optical power parameters. Electrical spectrum analyzer
BS EN 61290-2-3
1998
Optical fibre amplifiers. Basic specification. Test methods for optical power parameters. Optical power meter
BS EN 61290-3-1
2003
Optical fibre amplifiers. Basic specification. Test methods for noise figure parameters. Optical spectrum analyzer method
BS EN 61290-5-1
2000
Optical fibre amplifiers. Basic specification. Test methods for reflectance parameters. Optical spectrum analyser
BS EN 61290-5-3
2002
Optical fibre amplifiers. Basic specification. Test methods for reflectance parameters. Reflectance tolerance using an electrical spectrum analyser
BS EN 61290-6-1
1998
Optical fibre amplifiers. Basic specification. Test methods for pump leakage parameters. Optical demultiplexer
BS EN 61290-7-1
1998
Optical fibre amplifiers. Basic specification. Test methods for out-of-band insertion losses. Filtered optical power meter
BS EN 61290-10-1
2003
Optical fibre amplifiers. Basic specification. Multichannel parameters. Pulse method using an optical switch and optical spectrum analyzer
BS EN 61290-10-2
2003
Optical fibre amplifiers. Basic specification. Multichannel parameters. Pulse method using a gated optical spectrum analyzer
BS EN 61290-10-3
2003
Optical fibre amplifiers. Basic specification. Multichannel parameters. Probe methods
BS EN 61290-11-1
2003
Optical fibre amplifiers. Basic specification. Polarization mode dispersion. Jones matrix eigenanalysis method (JME)
BS EN 61291-2
2001
Optical fibre amplifiers. Digital applications. Performance specification template
BS EN 61291-4
2003
Optical fibre amplifiers. Multichannel applications. Performance specification template
BS EN 61291-5-2
2002
Optical fibre amplifiers. Qualification specifications. Reliability qualification for optical fibre amplifiers
BS EN 61297
1996
Industrial-process control systems. Classification of adaptive controllers for the purpose of evaluation
BS EN 61298-1
1996
Process measurement and control devices. General methods and procedures for evaluating performance. General considerations
BS EN 61298-2
1996
Process measurement and control devices. General methods and procedures for evaluating performance. Tests under reference conditions
BS EN 61298-3
1998
Process measurement and control devices. General methods and procedures for evaluating performance. Tests for the effects of influence quantities
BS EN 61298-4
1996
Process measurement and control devices. General methods and procedures for evaluating performance. Evaluation report content
BS EN 61300-2-10
1997
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Crush resistance
BS EN 61300-2-11
1997
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Axial compression
BS EN 61300-2-12
1997
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Impact
BS EN 61300-2-13
1997
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Acceleration
BS EN 61300-2-14
1997
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Maximum input power
BS EN 61300-2-15
1997
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Torque strength of coupling mechanisms
BS EN 61300-2-16
1997
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Mould gStandardth
BS EN 61300-2-17
1997
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Cold
BS EN 61300-1
2003
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. General and guidance
BS EN 61300-2-2
2003
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Mating durability
BS EN 61300-2-4
1997
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Fibre/cable retention
BS EN 61300-2-5
2002
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Torsion/twist
BS EN 61300-2-6
1997
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Tensile strength of coupling mechanism
BS EN 61300-2-8
1997
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Bump
BS EN 61300-2-9
1997
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Shock
BS EN 61300-2-19
1997
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Damp heat (steady state)
BS EN 61300-2-20
1997
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Climatic sequence
BS EN 61300-2-21
1997
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Composite temperature-humidity cyclic test
BS EN 61300-2-22
1997
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Change of temperature
BS EN 61300-2-23
1997
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Sealing for non-pressurized closures of fibre optic devices
BS EN 61300-2-24
2000
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Screen testing of ceramic alignment split sleeve by stress application
BS EN 61300-2-25
1997
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Sealing endurance for closures
BS EN 61300-2-26
1997
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Salt mist
BS EN 61300-2-27
1997
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Dust. Laminar flow
BS EN 61300-2-31
1997
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Nuclear radiation
BS EN 61300-2-32
1997
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Water vapour permeation
BS EN 61300-2-33
1997
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Assembly and disassembly of closures
BS EN 61300-2-34
1997
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Resistance to solvents and contaminating fluids
BS EN 61300-2-35
1997
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Cable nutation
BS EN 61300-2-36
1997
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Flammability (fire hazard)
BS EN 61300-2-37
1997
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Cable bending for closures
BS EN 61300-2-38
1997
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Sealing for pressurized closures of fibre optic devices
BS EN 61300-2-39
1997
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Susceptibility to external magnetic fields
BS EN 61300-2-40
2001
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Screen testing of attenuation of single-mode tuned angled optical connectors
BS EN 61300-2-41
1998
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Screen testing of attenuation of single-mode tuned non-angled optical fibre connectors
BS EN 61300-2-43
2000
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Screen testing of return loss of single mode PC optical fibre connectors
BS EN 61300-2-45
1999
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Durability test by water immersion
BS EN 61300-2-48
2003
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Temperature-humidity cycling
BS EN 61300-3-1
1997
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Visual examination
BS EN 61300-3-2
1999
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Polarization dependence of attenuation in a single-mode fibre optic device
BS EN 61300-3-3
2003
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Active monitoring of changes in attenuation and return loss
BS EN 61300-3-4
2001
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Attenuation
BS EN 61300-3-5
2001
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Wavelength dependence of attenuation
BS EN 61300-3-6
2003
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Return loss
BS EN 61300-3-7
2001
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Wavelength dependence of attenuation and return loss
BS EN 61300-3-8
1997
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Ambient light susceptibility
BS EN 61300-3-9
1997
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Far-end crosstalk
BS EN 61300-3-10
1997
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Gauge retention force
BS EN 61300-3-11
1997
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Engagement and separation forces
BS EN 61300-3-12
1997
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Polarization dependence of attenuation of a single-mode fibre optic component. Matrix calculation method
BS EN 61300-3-13
1997
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Control stability of a fibre optic switch
BS EN 61300-3-14
1997
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Accuracy and repeatability of the attenuation settings of a variable attenuator
BS EN 61300-3-15
1997
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Eccentricity of a convex polished ferrule endface
BS EN 61300-3-16
2003
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Endface radius of spherically polished ferrules
BS EN 61300-3-17
2000
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Endface angle of angle-polished ferrules
BS EN 61300-3-18
1997
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Keying accuracy of an angled endface connector
BS EN 61300-3-19
1997
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Polarization dependence of return loss of a single-mode fibre optic component
BS EN 61300-3-20
2002
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Directivity of fibre optic branching devices
BS EN 61300-3-20
2002
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Directivity of fibre optic branching devices
BS EN 61300-3-21
1998
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Examinations and measurements. Switching time and bounce time
BS EN 61300-3-22
1997
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Ferrule compression force
BS EN 61300-3-23
1998
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Examination and measurements. Fibre position relative to ferrule endface
BS EN 61300-3-24
2000
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Keying accuracy of optical connectors for polarization maintaining fibre
BS EN 61300-3-25
1997
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Concentricity of the ferrules and ferrules with fibre installed
BS EN 61300-3-26
2002
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Measurement of the angular misalignment between fibre and ferrule axes
BS EN 61300-3-27
1997
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Measurement method for the hole location of a multiway connector plug
BS EN 61300-3-28
2002
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Transient loss
BS EN 61300-3-30
2003
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Polish angle and fibre position on single ferrule multifibre connectors
BS EN 61300-3-31
2003
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Coupled power ratio measurement for fibre optic sources
BS EN 61300-3-33
1999
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Examinations and measurements. Ferrule withdrawal force
BS EN 61300-3-34
2002
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Attenuation of random mated connectors
BS EN 61300-3-36
2000
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Examinations and measurements. Measurement methods for the inside and outside diameters of fibre optic connector ferrules
BS EN 61300-3-39
1998
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. PC optical connector reference plug selection
BS EN 61300-3-40
1998
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Extinction ratio of a polarization maintaining (pm) fibre pigtailed connector
BS EN 61302
1996
Electrical insulating materials. Method to evaluate the resistance to tracking and erosion. Rotating wheel dip test
BS EN 61303
1997
Medical electrical equipment. Radionuclide calibrators. Particular methods for describing performance
BS EN 61305-1
1995
Household high-fidelity audio equipment and systems. Methods of measuring and specifying the performance. General
BS EN 61305-2
1998
Household high-fidelity audio equipment and systems. Methods of measuring and specifying the performance. FM radio tuners
BS EN 61305-3
1995
Household high-fidelity audio equipment and systems. Methods of measuring and specifying the performance. Amplifiers
BS EN 61305-5
2003
Household high-fidelity audio equipment and systems. Methods of measuring and specifying the performance. Loudspeakers
BS EN 61307
1997
Industrial micStandardave heating installations. Test methods for the determination of power output
BS EN 61308
1997
High-frequency dielectric heating installations. Test methods for the determination of power output
BS EN 61309
1995
Deep-fat fryers for household use. Methods for measuring the performance
BS EN 61310-1
1995
Safety of machinery. Indication, marking and actuation. Requirements for visual, auditory and tactile signals
BS EN 61310-2
1995
Safety of machinery. Indication, marking and actuation. Requirements for marking
BS EN 61310-3
1999
Safety of machinery. Indication, marking and actuation. Requirements for the location and operation of actuators
BS EN 61313-1
1997
Fibre optic passive components and cable assemblies. Capability approval. Generic specification
BS EN 61314-1
1997
Harmonized system of quality assessment for electronic components. Fibre optic fan-outs. Generic specification
BS EN 61315
1997
Calibration of fibre optic power meters
BS EN 61316
2000
Industrial cable reels
BS EN 61319-1
1996
Interconnections of satellite receiving equipment. Europe
BS EN 61325
1996
Insulators for overhead lines with a nominal voltage above 1000 V. Ceramic or glass insulator units for d.c systems. Definitions, test methods and acceptance criteria
BS EN 61326
1998
Electrical equipment for measurement, control and laboratory use. EMC requirements
BS EN 61329
1996
Sound system equipment. Methods for measuring and specifying the performance of sounders (electroacoustic transducers for tone production)
BS EN 61330
1996
High-voltage/low-voltage prefabricated substations
BS EN 61331-1
2002
Protective devices against diagnostic medical X-radiation. Determination of attenuation properties of materials
BS EN 61331-2
2002
Protective devices against diagnostic medical X-radiation. Protective glass plates
BS EN 61331-3
1999
Protective devices against diagnostic medical X-radiation. Protective clothing and protective devices for gonads
BS EN 61332
1997
Soft ferrite material classification
BS EN 61333
1998
Marking on U and E ferrite cores
BS EN 61334-3-22
2001
Distribution automation using distriubution line carrier systems. Mains signalling requirements. MV phase to earth and screen to earth coupling devices
BS EN 61334-4-32
1997
Distribution automation using distribution line carrier systems. Data communication protocols. Data link layer. Logical link control (LLC)
BS EN 61334-4-33
1998
Distribution automation using distribution line carrier systems. Data communication protocols. Data link layer. Connection oriented protocol
BS EN 61334-4-41
1998
Distribution automation using distribution line carrier systems. Data communication protocols. Application protocols. Distribution line message specification
BS EN 61334-4-42
1997
Distribution automation using distribution line carrier systems. Data communication protocols. Application protocols. Application layer
BS EN 61334-4-61
1998
Distribution automation using distribution line carrier systems. Data communication protocols. Network layer. Connectionless protocol
BS EN 61334-4-511
2001
Distribution automation using distribution line carrier systems. Data communication protocols. Systems management. CIASE protocol
BS EN 61334-4-512
2002
Distribution automation using distribution line carrier systems. Data communication protocols. System management using profile 61334-5-1. Management Information Base (MIB)
BS EN 61334-5-1
2001
Distribution automation using distribution line carrier systems. Lower layer profiles. The spread frequency shift keying (S-FSK) profile
BS EN 61334-6
2001
Distribution automation using distribution line carrier systems. A-XDR encoding rule
BS EN 61337-1-1
1998
Filters using waveguide type dielectric resonators. General information, standard values and test conditions. General information and standard values
BS EN 61338-1-3
2000
Waveguide type dielectric resonators. General information and test conditions. Measurement method of complex relative permittivity for dielectric resonator materials at micStandardave frequency
BS EN 61340-2-1
2002
Electrostatics. Measurement methods. Ability of materials and products to dissipate static electric charge
BS EN 61340-2-3
2000
Electrostatics. Methods of test for determining the resistance and resistivity of solid planar materials used to avoid electrostatic charge accumulation
BS EN 61340-3-1
2002
Electrostatics. Methods for simulation of electrostatic effects. Human body model (HBM). Component testing
BS EN 61340-3-2
2002
Electrostatics. Methods for simulation of electrostatic effects. Machine model (MM). Component testing
BS EN 61340-4-3
2002
Electrostatics. Standard test methods for specific applications. Footwear
BS EN 61340-5-2
2001
Electrostatics. Protection of electronic devices from electrostatic phenomena. User guide
BS EN 61345
1998
UV test for photovoltaic (PV) modules
BS EN 61346-1
1996
Industrial systems, installations and equipment and industrial products. Structuring principles and reference designations. Basic rules
BS EN 61346-2
2001
Industrial systems, installations and equipment and industrial products. Structuring principles and reference designations. Classification of objects and codes for classes
BS EN 61347-1
2001
Lamp controlgear. General and safety requirements
BS EN 61347-2-1
2001
Lamp controlgear. Particular requirements for starting devices (other than glow starters)
BS EN 61347-2-2
2001
Lamp controlgear. Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps
BS EN 61347-2-4
2001
Lamp controlgear. Particular requirements for d.c. supplied electronic ballasts for general lighting
BS EN 61347-2-6
2001
Lamp controlgear. Particular requirements for d.c. supplied electronic ballasts for aircraft lighting
BS EN 61347-2-7
2001
Lamp controlgear. Particular requirements for d.c. supplied electronic ballasts for emergency lighting
BS EN 61347-2-8
2001
Lamp controlgear. Particular requirements for ballasts for fluorescent lamps
BS EN 61347-2-9
2001
Lamp controlgear. Particular requirements for ballasts for discharge lamps (excluding fluorescent lamps)
BS EN 61347-2-10
2001
Lamp controlgear. Particular requirements for electronic invertors and convertors for high-frequency operation of cold tubular discharge lamps (neon tubes)
BS EN 61347-2-11
2002
Lamp controlgear. Particular requirements for miscellaneous electronic circuits used with luminaires
BS EN 61355
1997
Classification and designation of documents for plants, systems and equipment
BS EN 61358
1996
Acceptance inspection for direct connected alternating current static watt-hour meters for active energy (classes 1 and 2)
BS EN 61360-1
2002
Standard data element types with associated classification scheme for electric components. Definitions. Principles and methods
BS EN 61360-2
2002
Standard data element types with associated classification scheme for electric components. EXPRESS dictionary schema
BS EN 61360-4
2005
Standard data element types with associated classification scheme for electric components. Data element type definitions
BS EN 61362
1998
Guide to specification of hydroturbine control systems
BS EN 61373
1999
Railway applications. Rolling stock equipment. Shock and vibration tests
BS EN 61377
1997
Electric traction. Rolling stock. Combined testing of inverter-fed alternating current motors and their control
BS EN 61377-2
2002
Railway applications. Rolling stock. Combined testing. Chopper-fed direct current traction motors and their control
BS EN 61377-3
2002
Railway applications. Rolling stock. Combined testing of alternating current motors, fed by an indirect convertor, and their control system
BS EN 61378-1
1999
Convertor transformers. Transformers for industrial applications
BS EN 61378-2
2001
Convertor transformers. Transformers for HVDC applications
BS EN 61395
1998
Overhead electrical conductors. Creep test procedures for stranded conductors
BS EN 61400-2
1996
Wind turbine generator systems. Safety of small wind turbines
BS EN 61400-11
2003
Wind turbine generator systems. Acoustic noise measurement techniques
BS EN 61400-12
1998
Wind turbine generator systems. Wind turbine power performance testing
BS EN 61400-21
2002
Wind turbine generator systems. Measurement and assessment of power quality characteristics of grid connected wind turbines
BS EN 61427
2002
Secondary cells and batteries for solar photovoltaic energy systems. General requirements and methods of test
BS EN 61429
1997
Marking of secondary cells and batteries with the international recycling symbol ISO 7000-1135
BS EN 61434
1997
Secondary cells and batteries containing alkaline or non-acidic electrolytes. Guide to the designation of current in alkaline secondary cell and battery Standard
BS EN 61436
1998
Secondary cells and batteries containing alkaline or other non-acid electrolytes. Sealed nickel-metal hydride rechargeable single cells
BS EN 61440
1998
Secondary cells and batteries containing alkaline or other non-acid electrolytes. Sealed nickel-cadmium small prismatic rechargeable single cells
BS EN 61466-1
1997
Composite string insulator units for overhead lines with a nominal voltage greater than 1000 V. Standard strength classes and end fittings
BS EN 61466-2
1999
Composite string insulator units for overhead lines with a nominal voltage greater than 1000 V. Dimensional and electrical characteristics
BS EN 61477
2002
Live working. Minimum requirements for the utilization of tools, devices and equipment
BS EN 61478
2001
Live working. Ladders of insulating material
BS EN 61491
1999
Electrical equipment of industrial machines. Serial data link for real-time communication between controls and drives
BS EN 61496-1
2004
Safety of machinery. Electro-sensitive protective equipment. General requirements and tests
BS EN 61496-3
2001
Safety of machinery. Electro-sensitive protective equipment. Particular requirements for active opto-electronic protective devices responsive to diffuse reflection (AOPDDR)
BS EN 61508-1
2002
Functional safety of electrical/electronic/programmable electronic safety-related systems. General requirements
BS EN 61508-2
2002
Functional safety of electrical/electronic/programmable electronic safety-related systems. Requirements for electrical/electronic/programmable electronic safety-related systems
BS EN 61508-3
2002
Functional safety of electrical/electronic/programmable electronic safety-related systems. Software requirements
BS EN 61508-4
2002
Functional safety of electrical/electronic/programmable electronic safety-related systems. Definitions and abbreviations
BS EN 61508-5
2002
Functional safety of electrical/electronic/programmable electronic safety-related systems. Examples of methods for the determination of safety integrity levels
BS EN 61508-6
2002
Functional safety of electrical/electronic/programmable electronic safety-related systems. Guidelines on the application of IEC 61508-2 and IEC 61508-3
BS EN 61508-7
2002
Functional safety of electrical/electronic/programmable electronic safety-related systems. Overview of techniques and measures
BS EN 61512-1
1999
Batch control. Models and terminology
BS EN 61512-2
2002
Batch control. Data structures and guidelines for languages
BS EN 61515
1996
Mineral insulated thermocouple cables and thermocouples
BS EN 61518
2001
Mating dimensions between differential pressure (type) measuring instruments and flanged-on shut-off devices up to 413 bar (41,3 MPa)
BS EN 61523-1
2002
Delay and power calculation Standard. Integrated circuit delay and power calculation systems
BS EN 61523-2
2002
Delay and power calculation Standard. Pre-layout delay calculation specification for CMOS ASIC libraries
BS EN 61534-1
2003
Powertrack systems. General requirements
BS EN 61537
2002
Cable tray systems and cable ladder systems for cable management
BS EN 61543
1996
Residual current-operated protective devices (RCDs) for household and similar use. Electromagnetic compatibility
BS EN 61547
1996
Specification for equipment for general lighting purposes. EMC immunity requirements
BS EN 61549
2003
Miscellaneous lamps
BS EN 61557-1
1997
Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures. General requirements
BS EN 61557-2
1997
Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures. Insulation resistance
BS EN 61557-3
1997
Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures. Loop impedance
BS EN 61557-4
1997
Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures. Resistance of earth connection and equipotential bonding
BS EN 61557-5
1997
Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures. Resistance to earth
BS EN 61557-6
1998
Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures. Residual current devices (RCD) in TT, TN and IT systems
BS EN 61557-7
1997
Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures. Phase sequence
BS EN 61557-8
1997
Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures. Insulation monitoring devices for IT systems
BS EN 61557-9
2000
Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures. Equipment for insulation fault location in IT systems
BS EN 61557-10
2001
Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures. Combined measuring equipment for testing, measuring or monitoring of protective measures
BS EN 61558-1
1998
Safety of power transformers, power supply units and similar devices. General requirements and tests
BS EN 61558-2-1
1998
Safety of power transformers, power supply units and similar. Particular requirements for separating transformers for general use
BS EN 61558-2-3
2000
Safety of power transformers, power supply units and similar. Particular requirements for ignition transformers for gas and oil burners
BS EN 61558-2-4
1998
Safety of power transformers, power supply units and similar. Particular requirements for isolating transformers for general use
BS EN 61558-2-5
1998
Safety of power transformers, power supply units and similar. Particular requirements for shaver transformers and shaver supply units
BS EN 61558-2-6
1998
Safety of power transformers, power supply units and similar. Particular requirements for safety isolating transformers for general use
BS EN 61558-2-8
1999
Safety of power transformers, power supply units and similar. Particular requirements for bell and chime transformers
BS EN 61558-2-9
2003
Safety of power transformers, power supply units and similar. Particular requirements for transformers for class III handlamps for tungsten filament lamps
BS EN 61558-2-12
2001
Safety of power transformers, power supply units and similar. Particular requirements for constant voltage transformers
BS EN 61558-2-13
2000
Safety of power transformers, power supply units and similar. Particular requirements for auto-transformers for general use
BS EN 61558-2-15
2001
Safety of power transformers, power supply units and similar. Particular requirements for isolating transformers for the supply of medical locations
BS EN 61558-2-17
1998
Safety of power transformers, power supply units and similar. Particular requirements for transformers for switch mode power supplies
BS EN 61558-2-19
2001
Safety of power transformers, power supply units and similar. Particular requirements for perturbation attenuation transformers
BS EN 61558-2-20
2001
Safety of power transformers, power supply units and similar. Particular requirements for small reactors
BS EN 61558-2-23
2001
Safety of power transformers, power supply units and similar. Particular requirements for transformers for construction sites
BS EN 61566
1998
Measurement of exposure to radio-frequency electromagnetic fields. Field strength in the frequency range 100 kHz to 1 GHz
BS EN 61580-1
1997
Methods of measurement for waveguides. Decoupling and rotation of the plane of polarization
BS EN 61580-2
1997
Methods of measurement for waveguides. Level of intermodulation products
BS EN 61580-3
1997
Methods of measurement for waveguides. Variation of group delay
BS EN 61580-4
1998
Methods of measurement for waveguides. Attenuation of waveguide and waveguide assemblies
BS EN 61580-6
1997
Methods of measurement for waveguides. Return loss on waveguide and waveguide assemblies
BS EN 61580-7
1997
Methods of measurement for waveguides. Graphical method for the determination of waveguide performance
BS EN 61580-8
1997
Methods of measurement for waveguides. Waveguide power holding capability
BS EN 61580-9
1997
Methods of measurement for waveguides. Reflection coefficient at rectangular waveguide interfaces
BS EN 61587-1
2000
Mechanical structures for electronic equipment. Tests for IEC 60917 and IEC 60297. Climatic, mechanical tests and safety aspects for cabinets, racks, subracks and chassis
BS EN 61587-2
2001
Mechanical structures for electronic equipment. Tests for IEC 60917 and IEC 60297. Seismic tests for cabinets and racks
BS EN 61591
1997
Household range hoods. Methods for measuring performance
BS EN 61595-2
1998
Multichannel digital audio tape recorder (DATR), reel-to-reel system, for professional use. Format B
BS EN 61595-3
2000
Multichannel digital audio tape recorder (DATR), reel-to-reel system, for professional use. 24-bit operation for 16-bit media
BS EN 61596
1997
Magnetic oxide EP-cores and associated parts for use in inductors and transformers. Dimensions
BS EN 61599
2000
Videodisk players. Methods of measurement
BS EN 61603-1
1997
Transmission of audio and/or video and related signals using infra-red radiation. General
BS EN 61603-3
1998
Transmission of audio and/or video and related signals using infra-red radiation. Transmission systems for audio signals for conference and similar systems
BS EN 61603-6
2002
Transmission of audio and/or video and related signals using infra-red radiation. Video and audio-visual signals
BS EN 61605
2005
Fixed inductors for use in electronic and telecommunication equipment. Marking codes
BS EN 61609
1999
MicStandardave ferrite components. Guide for the drafting of specifications
BS EN 61610
1996
Prints and transparencies produced from electronic sources. Assessment of image quality
BS EN 61619
1997
Insulation liquids. Contamination by polychlorinated biphenyls (PCBs). Method of determination by capillary column gas chromatography
BS EN 61620
1999
Insulating liquids. Determination of the dielectric dissipation factor by measurement of the conductance and capacitance. Test method
BS EN 61621
1998
Dry, solid insulating materials. Resistance test to high-voltage, low-current arc discharges
BS EN 61628-1
1998
Corrugated pressboard and presspaper for electrical purposes. Definitions, designations and general requirements
BS EN 61628-2
1999
Corrugated pressboard and presspaper for electrical purposes. Methods of test
BS EN 61629-1
1997
Aramid pressboard for electrical purposes. Definitions, designations and general requirements
BS EN 61629-2
1997
Aramid pressboard for electrical purposes. Methods of test
BS EN 61631
2001
Test method for the mechanical strength of cores made of magnetic oxides
BS EN 61642
1998
Industrial a.c. networks affected by harmonics. Application of filters and shunt capacitors
BS EN 61643-11
2002
Low voltage surge protective devices. Surge protective devices connected to low-voltage power systems. Requirements and tests
BS EN 61643-21
2001
Low voltage surge protective devices. Surge protective devices connected to telecommunications and signalling networks. Performance requirements and testing methods
BS EN 61643-311
2001
Low voltage surge protective devices. Specification for gas discharge tubes (GDT)
BS EN 61643-321
2002
Low voltage surge protective devices. Specifications for avalanche breakdown diode (ABD)
BS EN 61643-331
2003
Low voltage surge protective devices. Specification for metal oxide varistors (MOV)
BS EN 61643-341
2001
Low voltage surge protective devices. Specification for thyristor surge suppressors (TSS)
BS EN 61646
1997
Thin-film terrestrial photovoltaic (PV) modules. Design qualification and type approval
BS EN 61660-1
1997
Short-circuit currents in d.c. auxiliary installations in power plants and substations. Calculation of short-circuit currents
BS EN 61660-2
1997
Short-circuit currents in d.c. auxiliary installations in power plants and substations. Calculation of effects
BS EN 61663-1
2000
Lightning protection. Telecommunication lines. Fibre optic installations
BS EN 61663-2
2001
Lightning protection. Telecommunication lines. Lines using metallic conductors
BS EN 61666
1997
Identification of terminals within a system
BS EN 61669
2001
Electroacoustics. Equipment for the measurement of real-ear acoustical characteristics of hearing aids
BS EN 61672-2
2003
Electroacoustics. Sound level meters. Pattern evaluation tests
BS EN 61672-1
2003
Electroacoustics. Sound level meters. Specifications
BS EN 61674
1998
Medical electric equipment. Dosimeters with ionization chambers and/or semi-conductor detectors as used in X-ray diagnosis imaging
BS EN 61675-1
1998
Radionuclide imaging devices. Characteristics and test conditions. Positron emission tomographs
BS EN 61675-2
1998
Radionuclide imaging devices. Characteristics and test conditions. Single photon emission computer tomographs
BS EN 61675-3
1998
Radionuclide imaging devices. Characteristics and test conditions. Gamma camera based wholebody imaging systems
BS EN 61676
2002
Medical electrical equipment. Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology
BS EN 61683
2000
Photovoltaic systems. Power conditioners. Procedure for measuring efficiency
BS EN 61685
2002
Ultrasonics. Flow measurement systems. Flow test object
BS EN 61689
1997
Ultrasonics. Physiotherapy systems. Performance requirements and methods of measurement in the frequency range 0.5 MHz to 5 MHz
BS EN 61691-1
1997
Design automation. VHDL language reference manual
BS EN 61691-2
2001
Design automation. Behavioural languages. VHDL multilogic system for model interoperability
BS EN 61691-3-2
2002
Design automation. Behavioural languages. Mathematical operation in VHDL
BS EN 61691-3-3
2002
Design automation. Behavioural languages. Synthesis in VHDL
BS EN 61701
2000
Salt mist corrosion testing of photovoltaic (PV) modules