Tools

Topics & Collections

small text medium text large text

BSI Standards List

Standard
Year
Title
BS 6378
1983
Specification for dimensions of spindle gauges for ring-spinning and ring-doubling frames
BS 6379:1
1983
Sampling of coffee and coffee products. Method of sampling green coffee in bags
BS 6379:2
1984
Sampling of coffee and coffee products. Methods of sampling instant coffee in cases with liners
BS 6379:3
1983
Sampling of coffee and coffee products. Specification for a coffee trier for sampling green coffee
BS 6379:4
1991
Sampling of coffee and coffee products. Method for preparation of samples of green coffee for use in sensory analysis
BS 6380
1997
Guide to low temperature properties and cold weather use of diesel fuels and gas oils conforming to BS EN 590 and classes A2 and D of BS 2869
BS 6381
1983
Specification for drawing boards
BS 6383
1983
Glossary of terms for open-end spinning machines
BS 6384
1983
Methods for determination of braking performance of agricultural and forestry vehicles
BS 6385
1996
Machinery for forestry. Winches. Performance requirements
BS 6387
1994
Specification for performance requirements for cables required to maintain circuit integrity under fire conditions
BS 6388:1
1991
Accelerated ageing of paper and board. Method for dry heat treatment at 105°C
BS 6388:2
1987
Accelerated ageing of paper and board. Method for dry heat treatment at 120°C or 150°C
BS 6388:3
1996
Accelerated ageing of paper and board. Method for moist heat treatment at 80°C and 65% relative humidity
BS 6389
1983
Methods for determination of operator's field of vision for agricultural tractors
BS 6391
1983
Specification for non-percolating layflat delivery hoses and hose assemblies for fire fighting purposes
BS 6392:0
1983
Testing of ethanol for industrial use. General introduction
BS 6392:1
1983
Testing of ethanol for industrial use. Method for detection of alkalinity or determination of acidity to phenolphthalein
BS 6392:2
1983
Testing of ethanol for industrial use. Method for determination of carbonyl compounds content present in small amounts (photometric method)
BS 6392:3
1983
Testing of ethanol for industrial use. Method for determination of carbonyl compounds content present in moderate amounts (titrimetric method)
BS 6392:4
1983
Testing of ethanol for industrial use. Method for determination of aldehydes content
BS 6392:5
1983
Testing of ethanol for industrial use. Method of test for miscibility with water
BS 6392:6
1983
Testing of ethanol for industrial use. Method for determination of methanol content [0.01% (V/V) to 0.20% (V/V)] (photometric method)
BS 6392:7
1983
Testing of ethanol for industrial use. Method for determination of methanol content [0.10% (V/V) to 1.50% (V/V)] (visual colorimetric method)
BS 6392:8
1983
Testing of ethanol for industrial use. Method for determination of esters content
BS 6392:9
1983
Testing of ethanol for industrial use. Method for determination of permanganate time
BS 6393
1987
Specification for calibration of stylus instruments
BS 6394:1
1983
Trace elements in milk and milk products. Method for the determination of copper content (reference method)
BS 6395
1983
Method for numerical designation of fabric faults by visual inspection
BS 6396
2002
Electrical systems in office furniture and office screens. Specification
BS 6396
2002
Electrical systems in office furniture and office screens. Specification
BS 6397
1983
Specification for scales and sizes for plotting frequency characteristics and polar diagrams
BS 6398
1983
Specification for bitumen damp-proof courses for masonry
BS 6399-1
1996
Loading for buildings. Code of practice for dead and imposed loads
BS 6399-2
2002
Loading for buildings. Code of practice for wind loads
BS 6399-3
1988
Loading for buildings. Code of practice for imposed roof loads
BS 6400
1997
Specification for installation of domestic sized gas meters (2nd and 3rd family gases)
BS 6400:1
2002
Specification for installation of domestic-sized gas meters maximum rated capacity not exceeding 6 m3/h (2nd and 3rd family gases). Low pressure (2nd family gases)
BS 6401
1983
Method for measurement, in the laboratory, of the specific optical density of smoke generated by materials
BS 6403
1983
Specification for simple telex terminals using single channel voice frequency signalling for connection to British Telecommunications telex network
BS 6404:3
1992
Magnetic materials. Methods of measurement of the magnetic properties of magnetic sheet and strip by means of a single sheet tester
BS 6404:5
1995
Magnetic materials. Permanent magnet (magnetically hard) materials. Methods of measurement of magnetic properties
BS 6404:6
1988
Magnetic materials. Methods of measurement of the magnetic properties of isotropic nickel-iron soft magnetic alloys, types E1, E3 and E4
BS 6404:7
1986
Magnetic materials. Method of measurement of the coercivity of magnetic materials in an open magnetic circuit
BS 6404-8.1
2001
Magnetic materials. Individual materials. Magnetically hard materials
BS 6404-8.6
1988
Magnetic materials. Individual materials. Specification for soft magnetic metallic materials
BS 6404-8.8
1992
Magnetic materials. Individual materials. Specification for thin magnetic steel strip for use at medium frequencies
BS 6404-8.9
1995
Magnetic materials. Individual materials. Standard specification for sintered soft magnetic materials
BS 6404-8.10
1995
Magnetic materials. Individual materials. Specification for magnetic materials (iron and steel) for use in relays
BS 6404-9
1988
Magnetic materials. Methods for determination of the geometrical characteristics of magnetic steel sheet and strip
BS 6404:11
1991
Magnetic materials. Method of test for the determination of surface insulation resistance of magnetic sheet and strip
BS 6404:12
1993
Magnetic materials. Guide to methods of assessment of temperature capability of interlaminar insulation coatings
BS 6404:13
1996
Magnetic materials. Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip
BS 6404:20
1996
Magnetic materials. Resistance and temperature classification of insulation coatings
BS 6405
1984
Specification for non-calibrated short link steel chain (grade 30) for general engineering purposes: class 1 and 2
BS 6406
1993
Nomenclature for oilseeds
BS 6407:1
1983
Cage pallets for retail use. Specification for collapsible cage pallets rated at 300 kg
BS 6407:2
1984
Cage pallets for retail use. Guide to the safe handling and use of collapsible cage pallets rated at 300 kg
BS 6408
1983
Specification for clothing made from coated fabrics for protection against wet weather
BS 6409
1983
Specification for whole or ground (powdered) cinnamon
BS 6410
1991
Methods of test for filter papers
BS 6412
1983
Methods for measurement of video tape properties
BS 6412
1990
Methods for measurement of video tape properties
BS 6413:0
1983
Lubricants, industrial oils and related products (class L). Classification (general)
BS 6413:1
1983
Lubricants, industrial oils and related products (class L). Classification for family A (total loss systems)
BS 6413:2
1983
Lubricants, industrial oils and related products (class L). Classification for family F (spindle bearings, bearings and associated clutches)
BS 6413-3.1
1988
Lubricants, industrial oils and related products (class L). Classification for family D (compressors). Air compressors
BS 6413-3.2
1989
Lubricants, industrial oils and related products (class L). Classification for family D (compressors). Gas and refrigeration compressors
BS 6413:5
1988
Lubricants, industrial oils and related products (class L). Classification for family T (turbines)
BS 6413:6
1991
Lubricants, industrial oils and related products (class L). Classification for family C (gears)
BS 6413:7
1988
Lubricants, industrial oils and related products (class L). Classification for family M (metalworking)
BS 6413:8
1988
Lubricants, industrial oils and related products (class L). Classification for family R (temporary protection against corrosion)
BS 6413:9
1988
Lubricants, industrial oils and related products (class L). Classification for family X (greases)
BS 6414
1983
Method for specifying characteristics of vibration and shock isolators
BS 6415
1983
Specification for audio-frequency calibration tape for transverse track video recorders
BS 6415
1990
Specification for audio-frequency calibration tape for transverse track video recorders
BS 6416
1983
Nomenclature for assembly tools for screws and nuts
BS 6417
1983
Specification for whole and ground turmeric
BS 6419
1983
Method for measurement of drawbar pull of earth-moving machinery
BS 6420
1983
Methods for measuring the dimensions of whole machines with their equipment used for earth-moving
BS 6421
1983
Method for volumetric rating of hoe type buckets of hydraulic excavators used for earth-moving
BS 6422
1983
Method for volumetric rating of loader and front loading excavator buckets used for earth-moving
BS 6423
1983
Code of practice for maintenance of electrical switchgear and controlgear for voltages up to and including 1 kV
BS 6423
1992
Code of practice for maintenance of electrical switchgear and controlgear for voltages up to and including 1 kV
BS 6426
1983
Specification for made-up curtains
BS 6427-1
1983
Conditioning of sacks for testing. Method for conditioning paper sacks
BS 6428
1983
Method for sampling empty sacks for testing
BS 6429
1989
Method for conversion between the two coded character sets of BS 4730 (ISO 646) and BS 6692:Part 2 (ISO 6937-2) and the CCITT international telegraph alphabet No. 2 (ITA 2)
BS 6430
1983
Method for representing SI and other units in information processing systems with limited character sets
BS 6431:1
1983
Ceramic floor and wall tiles. Specification for classification and marking, including definitions and characteristics
BS 6431:2
1984
Ceramic floor and wall tiles. Specification for extruded ceramic tiles with a low water absorption (E ? 3%). Group A1
BS 6431:5
1986
Ceramic floor and wall tiles. Specification for extruded ceramic tiles with a water absorption of E
BS 6431:6
1984
Ceramic floor and wall tiles. Specification for dust-pressed ceramic tiles with a low water absorption (E ? 3%). Group B1
BS 6431:7
1986
Ceramic floor and wall tiles. Specification for dust-pressed ceramic tiles with a water absorption of 3% < E ? 6%. Group BIIa
BS 6431:8
1986
Ceramic floor and wall tiles. Specification for dust-pressed ceramic tiles with a water absorption of 6% < E ? 10%. Group BIIb
BS 6431:9
1984
Ceramic floor and wall tiles. Specification for dust-pressed ceramic tiles with a water absorption of E
BS 6431:10
1984
Ceramic floor and wall tiles. Method for determination of dimensions and surface quality
BS 6431:11
1983
Ceramic floor and wall tiles. Method for determination of water absorption
BS 6431:12
1983
Ceramic floor and wall tiles. Method for determination of modulus of rupture
BS 6431:13
1986
Ceramic floor and wall tiles. Method for determination of scratch hardness of surface according to Mohs
BS 6431:14
1983
Ceramic floor and wall tiles. Method for determination of resistance to deep abrasion. Unglazed tiles
BS 6431:15
1983
Ceramic floor and wall tiles. Method for determination of linear thermal expansion
BS 6431:16
1983
Ceramic floor and wall tiles. Method for determination of resistance to thermal shock
BS 6431:17
1983
Ceramic floor and wall tiles. Method for determination of crazing reistance. Glazed tiles
BS 6431:18
1983
Ceramic floor and wall tiles. Method for determination of chemical resistance. Unglazed tiles
BS 6431:19
1984
Ceramic floor and wall tiles. Method for determination of chemical resistance. Glazed tiles
BS 6431:20
1984
Ceramic floor and wall tiles. Method for determination of resistance to surface abrasion. Glazed tiles
BS 6431:21
1984
Ceramic floor and wall tiles. Method for determination of moisture expansion using boiling water. Unglazed tiles
BS 6431:22
1986
Ceramic floor and wall tiles. Method for determination of frost resistance
BS 6431:23
1986
Ceramic floor and wall tiles. Specification for sampling and basis for acceptance
BS 6432
1984
Methods for determining properties of glass fibre reinforced cement material
BS 6433
1983
Terminology and designation of the profile shape of woodworking saw teeth
BS 6434
1984
Guide to the use of BS 6065 'Methods for sampling and acceptance testing of shaped refractory products'
BS 6435
1984
Specification for unfilled enclosures for the dry termination of HV cables for transformers and reactors
BS 6436
1984
Specification for ground mounted distribution transformers for cable box or unit substation connection
BS 6437
1984
Specification for polyethylene pipes (type 50) in metric diameters for general purposes
BS 6440
1999
Powered lifting platforms for use by disabled persons. Code of practice
BS 6441
1993
Schedule for petroleum measurement tables
BS 6444:1
1990
Cardiovascular implants. Methods of test for heart valve substitutes and requirements for their packaging and labelling
BS 6446
1997
Specification for manufacture of glued structural components of timber and wood based panels
BS 6447
1984
Specification for absolute and gauge pressure transmitters with electrical outputs
BS 6447
1986
Specification for absolute and gauge pressure transmitters with electrical outputs
BS 6448
1995
Specification for gas appliance governors of DN greater than 50 and for inlet pressures up to 200 mbar
BS 6449:2
1984
Rubber compounding ingredients: precipitated, hydrated silica. Method for determination of physical properties in rubber (including test recipe)
BS 6450:1
1993
Private branch exchanges for connection to public switched telephone networks run by certain public telecommunications operators. Specification for general requirements
BS 6450:2
1993
Private branch exchanges for connection to public switched telephone networks run by certain public telecommunications operators. Specification for private branch exchanges with terminating stations treated as an entirety
BS 6450-4
1993
Private branch exchanges for connection to public switched telephone networks run by certain public telecommunications operators. Specification for ports
BS 6450-6.1
1993
Private branch exchanges for connection to public switched telephone networks run by certain public telecommunications operators. Simple call-routeing mode (SCRM). Specification for the simple call-routeing mode of PBX operation, with terminating stations
BS 6450:7
1990
Private branch exchanges for connection to public switched telephone networks run by certain public telecommunication operators. Specification for the procedure for in-service observation of PBXs undergoing type approval
BS 6451
1984
Specification for netting and fibre rope load restraint systems in surface transport
BS 6452:1
1984
Beads for internal plastering and dry lining. Specification for galvanized steel beads
BS 6453
1984
Specification for performance of leathers for garments
BS 6454
1983
Method for calculation of the effective parameters of magnetic piece parts
BS 6455
1984
Method for monitoring the levels of residual solvents in flexible packaging materials
BS 6456
1983
Glossary of terms for correspondence envelopes
BS 6457
1984
Specification for reconstructed stone masonry units
BS 6458:2.1
1984
Fire hazard testing for electrotechnical products. Test methods. Glow-wire test
BS 6458:2.3
1985
Fire hazard testing for electrotechnical products. Test methods. Bad-connection test with heaters
BS 6460:1
1983
Accreditation of testing laboratories. Specification of the general requirements for the technical competence of testing laboratories
BS 6461:1
1984
Installation of chimneys and flues for domestic appliances burning solid fuel (including wood and peat). Code of practice for masonry chimneys and flue pipes
BS 6461-2
1984
Installation of chimneys and flues for domestic appliances burning solid fuel (including wood and peat). Code of practice for factory-made insulated chimneys for internal applications
BS 6462
1985
Specification for mechanical performance of peg-type casement stays and face-fixed wedge-action fasteners
BS 6463:2
1984
Quicklime, hydrated lime and natural calcium carbonate. Methods of chemical analysis
BS 6463-3
1987
Quicklime, hydrated lime and natural calcium carbonate. Methods of test for physical properties of quicklime
BS 6463-4
1987
Quicklime, hydrated lime and natural calcium carbonate. Methods of test for physical properties of hydrated lime and lime putty
BS 6463:101
1996
Quicklime, hydrated lime and natural calcium carbonate. Methods for preparing samples for testing
BS 6463:102
2001
Quicklime, hydrated lime and natural calcium carbonate. Methods for chemical analysis
BS 6463:103
1999
Quicklime, hydrated lime and natural calcium carbonate. Methods for physical testing
BS 6464
1984
Specification for reinforced plastics pipes, fittings and joints for process plants
BS 6465:1
1994
Sanitary installations. Code of practice for scale of provision, selection and installation of sanitary appliances
BS 6465:2
1996
Sanitary installations. Code of practice for space requirements for sanitary appliances
BS 6466
1984
Code of practice for design and installation of ceramic fibre furnace linings
BS 6467:1
1985
Electrical apparatus with protection by enclosure for use in the presence of combustible dusts. Specification for apparatus
BS 6467:2
1988
Electrical apparatus with protection by enclosure for use in the presence of combustible dusts. Guide to selection, installation and maintenance
BS 6468
1984
Specification for depth micrometers
BS 6469:98.1
1996
Insulating and sheathing materials of electric cables. Additional harmonized non-electrical test methods. Test for TMPU sheath
BS 6469:99.1
1992
Insulating and sheathing materials of electric cables. Test methods used in the United Kingdom but not specified in BS EN 60811 or other Parts of BS 6469. Non-electrical tests
BS 6469:99.2
1992
Insulating and sheathing materials of electric cables. Test methods used in the United Kingdom but not specified in BS EN 60811 or other Parts of BS 6469. Electrical tests
BS 6470
1984
Method for determination of water in insulating oils, and in oil-impregnated paper and pressboard
BS 6471
1984
Method for determination of the antimicrobial value of QAC disinfectant formulations
BS 6472
1992
Guide to evaluation of human exposure to vibration in buildings (1 Hz to 80 Hz)
BS 6475
1984
Specification for processor system bus interface (Eurobus A)
BS 6476
1984
Guide to garment quality and relevant British Standards
BS 6477
1992
Specification for water repellents for masonry surfaces
BS 6479
1984
Method for determination and verification of the effective depth of carburized and hardened cases in steels
BS 6480
1988
Specification for impregnated paper-insulated lead or lead alloy sheathed electric cables of rated voltages up to and including 33000 V
BS 6481
1984
Method for determination of effective depth of hardening of steel after flame or induction hardening
BS 6483:1
1984
Fertilizer distributors. Methods of evaluating performance under laboratory and field conditions
BS 6483:2
1985
Fertilizer distributors. Method of test for fertilizer distributors in lines
BS 6484
1984
Specification for electrical safety requirements for independent power supply units for indirect connection to certain telecommunication networks
BS 6485
1999
PVC-covered conductors for overhead power lines
BS 6487
1984
Specification for split pin holes and wire holes in bolts, screws and studs
BS 6490
1984
Specification for shapes and dimensions (excluding thread dimensions) of plough bolt heads for earth-moving machinery
BS 6493-1.1
1983
Semiconductor devices. Discrete devices. General
BS 6493:1.3
1986
Semiconductor devices. Discrete devices. Recommendations for signal (including switching) and regulator diodes
BS 6493-1.4
1991
Semiconductor devices. Discrete devices. Recommendations for micStandardave diodes and transistors
BS 6493:1.5
1992
Semiconductor devices. Discrete devices. Recommendations for optoelectronic devices
BS 6493:1.6
1984
Semiconductor devices. Discrete devices. Recommendations for thyristors
BS 6493:1.7
1989
Semiconductor devices. Discrete devices. Recommendations for bipolar transistors
BS 6493:1.8
1985
Semiconductor devices. Discrete devices. Recommendations for field-effect transistors
BS 6493:2.1
1985
Semiconductor devices. Integrated circuits. General
BS 6493:2.3
1987
Semiconductor devices. Integrated circuits. Recommendations for analogue integrated circuits
BS 6493:3
1985
Semiconductor devices. Mechanical and climatic test methods
BS 6494:4
1989
Hydraulic fluid power valve mounting surfaces. Specification for clamping dimensions of four-part, size 03 and 05, modular stack valves and directional control valves
BS 6494:6
1989
Hydraulic fluid power valve mounting surfaces. Specification for pressure-control valves (excluding pressure-relief valves), sequence valves, unloading valves, throttle valves and check valves
BS 6496
1984
Specification for powder organic coatings for application and stoving to aluminium alloy extrusions, sheet and preformed sections for external architectural purposes, and for the finish on aluminium alloy extrusions, sheet and preformed sections coated wi
BS 6497
1984
Specification for powder organic coatings for application and stoving to hot-dip galvanized hot-rolled steel sections and preformed steel sheet for windows and associated external architectural purposes, and for the finish on galvanized steel sections and
BS 6497
1992
Specification for powder organic coatings for application and stoving to hot-dip galvanized hot-rolled steel sections and preformed steel sheet for windows and associated external architectural purposes, and for the finish on galvanized steel sections and
BS 6498
2002
Guide to preparation of microfilm and other microforms that may be required as evidence
BS 6501:1
2004
Flexible metallic hose assemblies. Guidance on the construction and use of corrugated hose assemblies
BS 6501:2
1991
Flexible metallic hose assemblies. Specification for strip wound hoses and hose assemblies
BS 6502
1990
Specification for helical-scan video tape cassette system using 12.65 mm (0.5 in) magnetic tape on type Beta format
BS 6502
1984
Specification for helical-scan video tape cassette system using 12.65 mm (0.5 in) magnetic tape on type Beta format
BS 6504
1984
Method for determination of water absorption of paper and board (Klemm method)
BS 6506
1985
Code of practice for installation of private branch exchanges for connection to the British Telecommunications public switched telephone network
BS 6506
1984
Code of practice for installation of private branch exchanges for connection to the British Telecommunications public switched telephone network
BS 6507
1997
Agricultural tractors and machines. Engine test code. Net power
BS 6508
1984
Recommendations for track widths for agricultural tractors and machinery
BS 6509
1984
Specification for clearance zone on implements for the three-point linkage to agricultural tractors
BS 6510
2005
Specification for steel windows, sills, window boards and doors
BS 6511
1984
Specification for designation of perforations in industrial plate screens
BS 6512
1984
Specification for limits and repair of surface discontinuities of hot-rolled steel plates and wide flats
BS 6513:1
1984
Wideband cabled distribution systems. Glossary of terms
BS 6513:2
1984
Wideband cabled distribution systems. Methods of measurement
BS 6513:4
1984
Wideband cabled distribution systems. Specification for performance requirements, for upstream television
BS 6513:5
1987
Wideband cabled distribution systems. Recommendations for one-way and interactive data services
BS 6513-6
1987
Wideband cabled distribution systems. Specification for safety requirements
BS 6514
1984
Guide for implementation of V24 or RS232 as an asynchronous local interface
BS 6515
1986
Specification for polyethylene damp-proof courses for masonry
BS 6517
1984
Specification for low voltage switchgear and controlgear for industrial use. Single hole mounted control switches and indicator lights. Mounting dimensions
BS 6518
1984
Specification for low voltage switchgear and controlgear for industrial use. Control switches. Position switches 42.5 x 80. Dimensions and characteristics
BS 6519
1984
Specification for low voltage switchgear and controlgear for industrial use. Inductive proximity switches. Identifications of connections
BS 6520
1984
Specification for low voltage switchgear and controlgear for industrial use. Control switches. Position switches 30 x 55. Dimensions and characteristics
BS 6521
1984
Guide for proper use and maintenance of calibrated round steel link lifting chains
BS 6522
1984
Methods for determination of percentage water saturation of insulating oil
BS 6523
1984
Specification for glass beakers for laboratory use
BS 6524
1984
Method for determination of the surface resistivity of a textile fabric
BS 6525
1984
Specification for design and construction of reservoirs used in hydraulic fluid power systems
BS 6526
1998
Domestic oven gloves. Requirements and test methods
BS 6527
1988
Specification for limits and methods of measurement of radio interference characteristics of information technology equipment
BS 6528
1984
Glossary of terms for cylindrical screw threads
BS 6529
1984
Recommendations for examining documents, determining their subjects and selecting indexing terms
BS 6533
1984
Guide to macroscopic examination of steel by etching with strong mineral acids
BS 6534
1984
Method for quantitative determination of lead in tin coatings
BS 6535-2.2
1989
Fire extinguishing media. Halons. Code of practice for safe handling and transfer procedures
BS 6537
1984
Specification for staple type connectors for hydraulic fluid power applications
BS 6538:1
1985
Air permeance of paper and board. Method for determination of air permeance: general aspects of testing
BS 6538:2
1992
Air permeance of paper and board. Method for determination of air permeance using the Bendtsen apparatus
BS 6538:3
1987
Air permeance of paper and board. Method for determination of air permeance using the Gurley apparatus
BS 6539
1984
Specification for fireguards for use with solid fuel appliances
BS 6539
1987
Specification for fireguards for use with solid fuel appliances
BS 6541
1985
Specification for check character systems for use in information interchange, and guidance on choice and methods of application
BS 6542:2
1988
File structure and labelling of flexible disk cartridges for information interchange. Specification for variable file allocation structure
BS 6543
1985
Guide to use of industrial by-products and waste materials in building and civil engineering
BS 6544
1984
Specification for holes in dozer end bits for earth moving machinery
BS 6545
1984
Specification for main dimensions of, and terminology for, cloth rollers in textile machinery
BS 6547
1984
Method for measurement of variations of form and position of beams in textile machinery
BS 6548:1
1984
Maintainability of equipment. Guide to specifying and contracting for maintainability
BS 6548:2
1992
Maintainability of equipment. Guide to maintainability studies during the design phase
BS 6548:3
1992
Maintainability of equipment. Guide to maintainability, verification and the collection, analysis and presentation of maintainability data
BS 6548:4
1993
Maintainability of equipment. Guide to the planning of maintenance and maintenance support
BS 6548:5
1995
Maintainability of equipment. Guide to diagnostic testing
BS 6548:6
1995
Maintainability of equipment. Guide to statistical methods in maintainability evaluation
BS 6549
1984
Glossary of terms for classification of weaving machines
BS 6550
1985
Recommendation for working widths of equipment for sowing, planting, distributing fertilizers and spraying
BS 6551
1985
Specification for polyester fibre woven tapes for electrical purposes
BS 6553
1984
Guide for selection of fuse links of high-voltage fuses for transformer circuit applications
BS 6554:1
1984
Laminations for transformers and inductors for use in telecommunication and electronic equipment. Specification for dimensions, mechanical characteristics and electrical testing
BS 6556:1
1985
Low speed digital signals for use in coal mines. Specification for optical coupling
BS 6556:2
1985
Low speed digital signals for use in coal mines. Specification for transformer coupling
BS 6556:3
1985
Low speed digital signals for use in coal mines. Specification for message protocols
BS 6557
1985
Specification for kettles
BS 6559
1985
Guide. General introductory document on European (or CEN) methods of test for wood preservatives
BS 6563
1985
Method for determination of the roughness of paper and board by the Parker Print-surf apparatus
BS 6564:3
1990
Polytetrafluoroethylene (PTFE) materials and products. Specification for E glass fibre filled polytetrafluoroethylene
BS 6565
1985
Method for dimensioning and designating bolts, screws, studs and nuts
BS 6570
1986
Code of practice for the selection, care and maintenance of steel wire ropes
BS 6571:1
1989
Vehicle parking control equipment. Specification for coin operated clockwork parking meters
BS 6571:2
1989
Vehicle parking control equipment. Specification for electrically powered parking meters
BS 6571:4
1989
Vehicle parking control equipment. Specification for barrier type parking control equipment
BS 6571-5
1989
Vehicle parking control equipment. Guide to the requirements for non-coin operated apparatus for use with parking control equipment
BS 6571:6
1996
Vehicle parking control equipment. Specification for pay-on-foot parking control equipment
BS 6571:7
1997
Vehicle parking control equipment. Specification for parking discs
BS 6572
1985
Specification for blue polyethylene pipes up to nominal size 63 for below ground use for potable water
BS 6573
1985
Specification for steering capability of rubber tyred earth-moving machines
BS 6574
1985
Guide to training of mechanics concerned with the operation and maintenance of earth-moving machinery
BS 6576
2005
Code of practice for installation of chemical damp-proof courses
BS 6577
1985
Specification for mastic asphalt for building (natural rock asphalt aggregate)
BS 6580
1992
Specification for corrosion inhibiting, engine coolant concentrate ('antifreeze')
BS 6580
1993
Specification for corrosion inhibiting, engine coolant concentrate ('antifreeze')
BS 6582
2000
Continuously hot-dip lead alloy (terne) coated cold reduced carbon steel flat rolled products
BS 6583
1985
Methods for volumetric testing for rating of fan sections in central station air handling units (including guidance on rating)
BS 6584
1985
Guide for comparative testing of performance of detergents for hand dishwashing
BS 6585
1985
Guide for comparative testing of performance of detergents for domestic machine dishwashing
BS 6586:1
1993
Rigid polyurethane (PUR) foam produced by the press injection method. Specification for PUR foam for insulated panels for transport containers and insulated vehicles bodies
BS 6587
1985
Method of acceptance inspection for fasteners
BS 6588
1996
Specification for Portland pulverized-fuel ash cements
BS 6590
1985
Specification for capacity ratings and dimensions of power presses, mechanical open front type
BS 6591
1985
Specification for scraper bars for chain conveyors for mining
BS 6592
1985
Specification for drive sprocket assemblies for chain conveyors for mining
BS 6593
1985
Code of practice for on-site non-mechanical jointing of plied textile and steel reinforced conveyor belting
BS 6595
1985
Specification for safety requirements for baby nests
BS 6599
1985
Method for determination of crushing strength of iron ore pellets
BS 6600:1
1987
Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment. Specification for the outline dimensions of transformers and inductors using YEI-1 laminations
BS 6601
1985
Specification for mail payment orders
BS 6602
1985
Specification for international securities identification numbering system (ISIN)
BS 6603
1985
Method for determination of castor oil glycerides content of raw, natural rubber by thin layer chromatography
BS 6605
1995
Specification for cross recesses for screws
BS 6605
1990
Specification for cross recesses for screws
BS 6606
1987
Methods for sampling oilseed residues
BS 6607:1
1985
Tool shanks with 7/24 taper for automatic tool changers. Specification for shanks Nos. 40, 45, and 50
BS 6607:2
1985
Tool shanks with 7/24 taper for automatic tool changers. Specification for retention knobs for shanks Nos. 40, 45 and 50
BS 6607:3
1993
Tool shanks with 7/24 taper for automatic tool changers. Specification for tapers for spindle noses
BS 6607:4
1994
Tool shanks with 7/24 taper for automatic tool changers. Specification for functional dimensions of front faces of spindle holders for machine centres
BS 6608
1985
Specification for cattle hide leathers for upholstered furniture
BS 6610
1996
Specification for Pozzolanic pulverized-fuel ash cement
BS 6611
1985
Guide to evaluation of the response of occupants of fixed structures, especially buildings and offshore structures, to low-frequency horizontal motion (0.063 Hz to 1 Hz)
BS 6613
1985
Methods for specifying characteristics of resilient shaft couplings
BS 6614
1991
Specification for safety devices and water supply connections for washing machines, dishwashers and tumbler dryers connected to the water supply mains
BS 6615
1996
Specification for dimensional tolerances for metal and metal alloy castings
BS 6616
1986
Specification for paper and print for optical character recognition (OCR)
BS 6618
1985
Specification for photographic grade potassium sulphite, 650 g/L aqueous solution
BS 6620:1
1991
Industrial plate screens. Guide for screens of thickness 3 mm and above
BS 6620:2
1991
Industrial plate screens. Guide for screens of thickness below 3 mm
BS 6621
1985
Method for determination of combine harvester capacity and unloading rate
BS 6622
1999
Specification for cables with extruded cross-linked polyethylene or ethylene propylene rubber insulation for rated voltages from 3.8/6.6 kV up to 19/33 kV
BS 6624
1985
Specification for personal weighing machines for domestic use
BS 6627
1985
Recommendations for presentation of headers for microfiche of monographs and serials
BS 6628
1985
Method for determination of the maximum symmetrical radiation field from a rotating anode X-ray tube for medical diagnosis
BS 6628
1992
Method for determination of the maximum symmetrical radiation field from a rotating anode X-ray tube for medical diagnosis
BS 6630
1991
Method for identification of antidegradants in rubber and rubber products by thin layer chromatography
BS 6630
1985
Method for identification of antidegradants in rubber and rubber products by thin layer chromatography
BS 6631
1985
Specification for rubber hoses and hose assemblies for rotary drilling and vibration applications
BS 6632
1985
Method for measurement and reporting of shipboard vibration data
BS 6633
1985
Method for measurement and reporting of local vibration data of ship structures and equipment
BS 6634
1985
Guide for overall evaluation of vibration in merchant ships
BS 6635
2003
Manufacture of saddle trees made from wood. Specification
BS 6638:2
1989
Guide to transmission signal quality at DTE/DCE interfaces. Synchronous transmission
BS 6641
1985
Glossary of medical radiology terms
BS 6641
1991
Glossary of medical radiology terms
BS 6642
1985
Specification for disposable plastics refuse sacks made from polyethylene
BS 6643:1
1985
Recharging fire extinguishers (manufactured to BS 5423 'Specification for portable fire extinguishers'). Specification for procedure and materials
BS 6643:2
1985
Recharging fire extinguishers (manufactured to BS 5423 'Specification for portable fire extinguishers'). Specification for powder refill charges
BS 6644
2005
Specification for installation of gas-fired hot water boilers of rated inputs between 60 kW and 2 MW (2nd and 3rd family gases)
BS 6647
1985
Guide to oscilloscopes and peak voltmeters for impulse tests
BS 6648
1992
Methods for wet ashing of textile materials for subsequent determination of metal content
BS 6648
1986
Methods for wet ashing of textile materials for subsequent determination of metal content
BS 6651
1999
Code of practice for protection of structures against lightning
BS 6652
1985
Specification for packagings resistant to opening by children
BS 6652
1989
Specification for packagings resistant to opening by children
BS 6653
1985
Method for expression of the properties of logic analyzers
BS 6654
1985
Method for determination of the electrical resistivity of textile floor coverings
BS 6655
1986
Specification for pure tone air conduction threshold audiometry for hearing conservation purposes
BS 6655
1992
Specification for pure tone air conduction threshold audiometry for hearing conservation purposes
BS 6656
2002
Assessment of inadvertent ignition of flammable atmospheres by radio-frequency radiation. Guide
BS 6657
2002
Assessment of inadvertent initiation of bridge wire electro-explosive devices by radio-frequency radiation. Guide
BS 6658
1985
Specification for protective helmets for vehicle users
BS 6661
1986
Guide for design, construction and maintenance of single-skin air supported structures
BS 6662
1985
Guide to methods of measurement of short duration transients on low voltage power and signal lines
BS 6663
1986
Methods for determination of crimp rigidity of textured nylon yarns
BS 6664:4
1991
Flashpoint of petroleum and related products. Method for determination of flashpoint (rapid equilibrium method)
BS 6664-5
1990
Flashpoint of petroleum and related products. Method for determination of flashpoint by Pensky-Martens closed tester
BS 6668:1
1986
Textile lifting slings. Specification for lifting slings for general service made from certain natural and man-made fibre ropes
BS 6668:2
1987
Textile lifting slings. Specification for roundslings made of man-made fibre for general service
BS 6669:1
1986
Methods of test for electroplated silver and silver alloy coatings. Determination of coating thickness
BS 6669:2
1986
Methods of test for electroplated silver and silver alloy coatings. Adhesion tests
BS 6669:3
1989
Methods of test for electroplated silver and silver alloy coatings. Detection of residual salts
BS 6670:1
1986
Methods of test for electroplated gold and gold alloy coatings. Determination of coating thickness
BS 6670:4
1986
Methods of test for electroplated gold and gold alloy coatings. Determination of gold content
BS 6670:5
1986
Methods of test for electroplated gold and gold alloy coatings. Adhesion tests
BS 6673
1986
Specification for polyester glass mat sheets for electrical purposes
BS 6674
1985
Specification for disposable micropipettes
BS 6675
1986
Specification for servicing valves (copper alloy) for water services
BS 6683
1985
Guide to installation and use of valves
BS 6683
1991
Guide to installation and use of valves
BS 6684
1989
Specification for safety harnesses (including detachable walking reins) for restraining children when in perambulators (baby carriages), pushchairs and high chairs and when walking
BS 6684
1990
Specification for safety harnesses (including detachable walking reins) for restraining children when in perambulators (baby carriages), pushchairs and high chairs and when walking
BS 6688
1986
Method for specifying requirements for low voltage power supplies, switching type, d.c. output
BS 6695
1986
Specification for nostro accounts reconciliation in banking
BS 6696
1986
Methods for use and testing of capacity of volumetric glassware
BS 6697
1986
Methods of test for electrohydraulic proportional control valves
BS 6699
1992
Specification for ground granulated blastfurnace slag for use with Portland cement
BS 6700
1997
Specification for design, installation, testing and maintenance of services supplying water for domestic use within buildings and their curtilages
BS 6701
2004
Code of practice for installation of apparatus intended for connection to certain telecommunication systems
BS 6704
1996
Code of practice for selection, installation and maintenance of intrinsically safe electrical equipment in coal mines
BS 6705
1987
Specification for electrical measuring instruments for use on intrinsically safe circuits in coal mines
BS 6706
1986
Specification for disposable glass serological pipettes
BS 6707
1986
Specification for intruder alarm systems for consumer installation
BS 6708
1998
Flexible cables for use at mines and quarries
BS 6709
1986
Specification for interconnection of electrical apparatus, constructed to two or more British Standards, for use in mines susceptible to firedamp
BS 6710
1987
Specification for dimensions of chain wheel tooth forming tools
BS 6711:1
1986
Vocabulary relating to laboratory apparatus made essentially from glass, porcelain or vitreous silica. Names for items of apparatus
BS 6712:1
1995
Measurement of hygroexpansivity of paper and board. Method for the measurement of hygroexpansivity up to a maximum relative humidity of 68%
BS 6712:2
1991
Measurement of hygroexpansivity of paper and board. Method for measurement of hygroexpansivity up to a maximum relative humidity of 86%
BS 6713:1
1986
Explosion protection systems. Method for determination of explosion indices of combustible dusts in air
BS 6713:2
1986
Explosion protection systems. Method for determination of explosion indices of combustible gases in air
BS 6713:3
1986
Explosion protection systems. Method for determination of explosion indices of fuel/air mixtures other than dust/air and gas/air mixtures
BS 6713:4
1986
Explosion protection systems. Method for determination of efficacy of explosion suppression systems
BS 6714
1986
Specification for installation of decorative log and other fuel effect appliances (1st, 2nd and 3rd family gases)
BS 6715
1991
Specification for chamois leather
BS 6716
1986
Guide to properties and types of rubber
BS 6717
2001
Precast, unreinforced concrete paving blocks. Requirements and test methods
BS 6719
1986
Guide to specifying user requirements for a computer-based system
BS 6720
1986
Specification for marking transit information on packages for distribution
BS 6721:10
1989
Sampling and analysis of copper and copper alloys. Method for determination of chromium in copper alloys: titrimetric method
BS 6721:11
1989
Sampling and analysis of copper and copper alloys. Method for determination of sulphur in copper and copper alloys: combustion titrimetric method
BS 6721:4
1986
Sampling and analysis of copper and copper alloys. Method for determination of chromium in copper and copper alloys by flame atomic absorption spectrophotometry
BS 6721:5
1986
Sampling and analysis of copper and copper alloys. Method for determination of zinc in copper and copper alloys by flame atomic absorption spectrophotometry
BS 6721:6
1989
Sampling and analysis of copper and copper alloys. Method for determination of phosphorus in copper and copper alloys by spectrophotometry
BS 6721:7
1989
Sampling and analysis of copper and copper alloys. Method for determination of nickel in copper alloys: gravimetric method
BS 6721:8
1989
Sampling and analysis of copper and copper alloys. Method for determination of nickel in copper alloys: titrimetric method
BS 6721:9
1989
Sampling and analysis of copper and copper alloys. Method for determination of lead in copper alloys by flame atomic absorption spectrophotometry
BS 6722
1986
Recommendations for dimensions of metallic materials
BS 6723
1985
Guide to establishment and development of multilingual thesauri
BS 6724
1997
Electric cables. Thermosetting insulated, armoured cables for voltages of 600/1000 V and 1900/3300 V, having low emission of smoke and corrosive gases when affected by fire
BS 6726
1998
Specification for festoon and temporary lighting cables and cords
BS 6727
1987
Specification for representation of numerical values in character strings for information interchange
BS 6728:2
1993
Thermoplastics hot water bottles. Specification for hot water bottles manufactured from polyolefin materials
BS 6729
1987
Method for determination of the dynamic fracture toughness of metallic materials
BS 6730
1986
Specification for black polyethylene pipes up to nominal size 63 for above ground use for cold potable water
BS 6732
1987
Specification for low-voltage switchgear and controlgear for industrial use. Size numbers and gauges for flat connections
BS 6733
1987
Specification for low-voltage switchgear and controlgear for industrial use. Requirements applicable to terminals concerning cross-sections of connectable conductors
BS 6734
1986
Method for determination of the antimicrobial efficacy of disinfectants for veterinary and agricultural use
BS 6735
1987
Specification for reach volumes for the location of controls on agricultural tractors and machinery
BS 6736
1986
Code of practice for hand signalling for use in agricultural operations
BS 6738
1986
Recommendations for presentation of spine titles
BS 6739
1986
Code of practice for instrumentation in process control systems: installation design and practice
BS 6740
1987
Method for determining departures from roundness by measuring variations in radius
BS 6742:1
1987
Electrostatic painting and finishing equipment using flammable materials. Electrostatic painting and finishing equipment using flammable materials. Specification for hand-held spray guns and associated apparatus
BS 6742:2
1987
Electrostatic painting and finishing equipment using flammable materials. Specification for selection, installation and use of hand-held paint spray guns (energy limit of 0,24 mJ) and associated apparatus
BS 6742:3
1990
Electrostatic painting and finishing equipment using flammable materials. Electrostatic painting and finishing equipment using flammable materials. Specification for selection, installation and use of hand-held powder spray guns (energy limit of 5 mJ) and
BS 6742:4
1990
Electrostatic painting and finishing equipment using flammable materials. Electrostatic painting and finishing equipment using flammable materials. Specification for selection, installation and use of hand-held flock spray guns (energy limit of 0,24 mJ or
BS 6744
2001
Stainless steel bars for the reinforcement of and use in concrete. Requirements and test methods
BS 6746
1992
Specification for PVC insulation and sheath of electric cables
BS 6746
1990
Specification for PVC insulation and sheath of electric cables
BS 6747
1991
Specification for orthodontic resins
BS 6747
1987
Specification for orthodontic resins
BS 6748
1986
Specification for limits of metal release from ceramic ware, glassware, glass ceramic ware and vitreous enamel ware
BS 6750
1986
Specification for modular coordination in building
BS 6751
1986
Guide for protection of machine tools intended for use in extreme environmental conditions
BS 6752
1986
Specification for Bourdon tube pressure gauges used in welding, cutting and related processes
BS 6753
1986
Specification for shotbolts (solenoid operated) for guarding machinery
BS 6754
1986
Specifications and testing of compressed air dryers
BS 6755:1
1986
Testing of valves. Specification for production pressure testing requirements
BS 6755:2
1987
Testing of valves. Specification for fire type-testing requirements
BS 6756
1986
Specification for fibre rope cargo nets
BS 6757
1986
Methods of test for thermal performance of solar collectors
BS 6758
1987
Specification for type C helical video tape recorders
BS 6759:1
1984
Safety valves. Specification for safety valves for steam and hot water
BS 6759:2
1984
Safety valves. Specification for safety valves for compressed air or inert gases
BS 6759:3
1984
Safety valves. Specification for safety valves for process fluids
BS 6762:2
1991
Services for leisure accommodation vehicles and transportable accommodation units. Code of practice for the installation of solid fuel fired heating in park homes and transportable accommodation units
BS 6765:3
1989
Leisure accommodation vehicles: caravans. Specification for 12 V direct current extra low voltage electrical installations
BS 6765:4
1987
Leisure accommodation vehicles: caravans. Specification for undergear
BS 6767:1
1999
Transportable accommodation units. Recommendations for design and construction of the basic unit
BS 6767:2
1998
Transportable accommodation units. Recommendations for design and installation of services and fittings with guidance on transportation, siting and aspects relating to habitation
BS 6770
1988
Guide for exterior colours for park homes (mobile homes), holiday caravans and transportable accommodation units
BS 6776
1990
Specification for Edison screw lampholders
BS 6776
1990
Specification for Edison screw lampholders
BS 6778
1986
Specification for fireguards for use with portable, free-standing or wall-mounted heating appliances
BS 6779:1
1998
Highway parapets for bridges and other structures. Specification for vehicle containment parapets of metal construction
BS 6779:2
1991
Highway parapets for bridges and other structures. Specification for vehicle containment parapets of concrete construction
BS 6779:3
1994
Highway parapets for bridges and other structures. Specification for vehicle containment parapets of combined metal and concrete construction
BS 6779:4
1999
Highway parapets for bridges and other structures. Specification for parapets of reinforced and unreinforced masonry construction
BS 6781
1986
Specification for continuously organic coated steel flat products
BS 6782:1
1987
Binders for paints. Method for determination of volatile and non-volatile content
BS 6782:5
1997
Binders for paints. Method for estimation of colour of clear liquids by the Gardner colour scale
BS 6782:6
1987
Binders for paints. Method for determination of softening point (ring and ball method)
BS 6782:10
1998
Binders for paints. Determination of monomeric diisocyanates in polyisocyanate resins
BS 6782:11
1999
Binders for paints. Determination of the viscosity of industrial cellulose nitrate solutions and their classification
BS 6782:12
1997
Binders for paints. Estimation of colour of clear liquids by the platinum-cobalt scale
BS 6782:14
1999
Binders for paints. Gel permeation chromatography (GPC) with tetrahydrofuran (THF) as eluent
BS 6782:15
1997
Binders for paints. Specifications and test methods for tall-oil fatty acids
BS 6782:16.1
2000
Binders for paints. Methods of test for alkyd resins. General methods
BS 6782:16.2
2000
Binders for paints. Methods of test for alkyd resins. Determination of phthalic anhydride content
BS 6782:16.3
2000
Binders for paints. Methods of test for alkyd resins. Determination of unsaponifiable matter content
BS 6782:16.4
2000
Binders for paints. Methods of test for alkyd resins. Determination of fatty acid content
BS 6782:18
2001
Binders for paints. General methods of test for water-dilutable binders
BS 6783:1
1986
Sampling and analysis of nickel, ferronickel and nickel alloys. Method for determination of silver, bismuth, cadmium, cobalt, copper, iron, manganese, lead and zinc in nickel by flame atomic absorption spectrometry
BS 6783:2
1986
Sampling and analysis of nickel, ferronickel and nickel alloys. Method for determination of nickel in ferronickel (dimethylglyoxime gravimetric method)
BS 6783:3
1986
Sampling and analysis of nickel, ferronickel and nickel alloys. Method for determination of cobalt in ferronickel by flame atomic absorption spectrometry
BS 6783:4
1986
Sampling and analysis of nickel, ferronickel and nickel alloys. Method for determination of silver, arsenic, bismuth, cadmium, lead, antimony, selenium, tin, tellurium and thallium in nickel by electrothermal atomic absorption spectrometry
BS 6783:5
1986
Sampling and analysis of nickel, ferronickel and nickel alloys. Method for determination of carbon in nickel, ferronickel and nickel alloys by infra-red absorption after induction furnace combustion
BS 6783:6
1986
Sampling and analysis of nickel, ferronickel and nickel alloys. Method for determination of sulphur in nickel by methylene blue molecular absorption spectrometry after generation of hydrogen sulphide
BS 6783:7
1986
Sampling and analysis of nickel, ferronickel and nickel alloys. Method for determination of sulphur in nickel, ferronickel and nickel alloys by infra-red absorption after induction furnace combustion
BS 6783:8
1986
Sampling and analysis of nickel, ferronickel and nickel alloys. Method for determination of sulphur in nickel, ferronickel and nickel alloys by iodimetric titration after induction furnace combustion
BS 6783:9
1986
Sampling and analysis of nickel, ferronickel and nickel alloys. Method for determination of silicon in ferronickel (gravimetric method)
BS 6783:10
1990
Sampling and analysis of nickel, ferronickel and nickel alloys. Method for determination of iron in nickel alloys (titrimetric method using potassium dichromate)
BS 6783:11
1990
Sampling and analysis of nickel, ferronickel and nickel alloys. Method for the determination of cobalt in nickel alloys (potentiometric titration method using potassium hexacyanoferrate (III))
BS 6783:12
1992
Sampling and analysis of nickel, ferronickel and nickel alloys. Method for the determination of phosphorus in nickel alloys by molybdenum blue molecular absorption spectrometry
BS 6783:13
1992
Sampling and analysis of nickel, ferronickel and nickel alloys. Method for the determination of phosphorus in nickel, ferronickel and nickel alloys by phosphovanadomolybdate molecular absorption spectrometry
BS 6783:14
1994
Sampling and analysis of nickel, ferronickel and nickel alloys. Method for the determination of total boron content of nickel, and nickel alloys by curcumin molecular absorption spectrometry
BS 6783:15
1994
Sampling and analysis of nickel, ferronickel and nickel alloys. Method for the determination of titanium in nickel alloys by diantipyrylmethane molecular absorption spectrometry
BS 6785
1986
Code of practice for solar heating systems for swimming pools
BS 6788:3
1990
Neurosurgical implants. Specification for self-closing intracranial aneurysm clips
BS 6789:1
1984
Apparatus with one or more particular functions for connection to public switched telephone networks run by certain public telecommunications operators. Specification for general requirements
BS 6789:2
1984
Apparatus with one or more particular functions for connection to public switched telephone networks run by certain public telecommunications operators. Specification for apparatus with loudspeaking facilities
BS 6789:3.1
1985
Apparatus with one or more particular functions for connection to the British Telecommunications public switched telephone network. Apparatus with auto-calling, auto-answering and auto-clearing facilities. Specification for auto-calling facilities
BS 6789:3.2
1987
Apparatus with one or more particular functions for connection to the British Telecommunications public switched telephone network. Apparatus with auto-calling, auto-answering and auto-clearing facilities. Specification for auto-answering and auto-clearin
BS 6789:6.1
1986
Apparatus with one or more particular functions for connection to certain public switched telephone networks. Specification for series connected apparatus. Apparatus having maximum allowable impairments
BS 6789:6.2
1989
Apparatus with one or more particular functions for connection to certain public switched telephone networks. Specification for series connected apparatus. Apparatus having less than maximum allowable impairments
BS 6789:7
1988
Apparatus with one or more particular functions for connection to public switched telephone networks run by certain public telecommunications operators. Specification for apparatus with call barring facilities
BS 6790
1987
Method for determination of colour stability of dental polymeric materials
BS 6790
1992
Method for determination of colour stability of dental polymeric materials
BS 6791
1969
Aluminium conductors in insulated cables
BS 6793
1988
Specification for men's uniform shirts
BS 6793
1987
Specification for men's uniform shirts
BS 6794
1986
Method for reporting measured vibration data for land vehicles
BS 6798
2000
Specification for installation of gas-fired boilers of rated input not exceeding 70 kW net
BS 6799
1986
Code of practice for wire-free intruder alarm systems
BS 6800
1986
Specification for home and personal security devices
BS 6801
1986
Method for determination of image distortion of electro-optical X-ray image intensifiers
BS 6801
1992
Method for determination of image distortion of electro-optical X-ray image intensifiers
BS 6803:1
1993
Vehicle security alarm systems. Specification for installed systems
BS 6803:3
1990
Vehicle security alarm systems. Code of practice for the protection of vehicles and goods in transit
BS 6804
1986
Code of practice for social alarm systems
BS 6805:1
1987
Statistical methods for determining and verifying stated noise emission values of machinery and equipment. Glossary of terms
BS 6805:2
1987
Statistical methods for determining and verifying stated noise emission values of machinery and equipment. Method for determining and verifying stated values for individual machines
BS 6805:3
1987
Statistical methods for determining and verifying stated noise emission values of machinery and equipment. Method for determining and verifying stated values for batches of machines using a simple (transition) method
BS 6805:4
1987
Statistical methods for determining and verifying stated noise emission values of machinery and equipment. Methods for determining and verifying stated values for batches of machines
BS 6806
2002
Textiles. Determination of formaldehyde. Method for the determination of total and free (water extraction method) formaldehyde using chromotropic acid
BS 6806:3
1987
Formaldehyde in textiles. Method for determination of released formaldehyde
BS 6807
1996
Assessment of the ignitability of mattresses, upholstered divans and upholstered bed bases with flaming types of primary and secondary sources of ignition
BS 6808:1
1987
Coordinate measuring machines. Glossary of terms
BS 6808:3
1989
Coordinate measuring machines. Code of practice
BS 6809
1987
Method for calibration of radiometers for use in fire testing
BS 6811-1.1
1987
Winding wires. Basic dimensions. Specification for diameters of conductors for round winding wires
BS 6811-1.2
1987
Winding wires. Basic dimensions. Specification for overall diameters of enamelled round winding wires
BS 6812:3
1991
Airborne noise emitted by earth-moving machinery. Method of measurement of exterior noise in dynamic test conditions
BS 6814
1987
Specification for dental zinc polycarboxylate cements
BS 6814
1992
Specification for dental zinc polycarboxylate cements
BS 6818:1
1987
Front-mounted linkage and power take-off for agricultural wheeled tractors. Specification for power take-off
BS 6818:2
1987
Front-mounted linkage and power take-off for agricultural wheeled tractors. Specification for front linkage
BS 6819
1987
Methods for measurement of tool forces and tipping loads of loaders used for earth-moving
BS 6820
1987
Method for measuring and designating the size of rings used in jewellery
BS 6820
1987
Method for measuring and designating the size of rings used in jewellery
BS 6826
1987
Specification for linoleum and cork carpet sheet and tiles
BS 6827
1987
Guide to storage and transport of green coffee in bags
BS 6828:4
1987
Dental rotary instruments. Specification for steel and carbide finishing burs
BS 6828-7
1987
Dental rotary instruments. Specification for laboratory abrasive instruments
BS 6828:9
1987
Dental rotary instruments. Methods of test
BS 6829:0
1991
Analysis of surface active agents (raw materials). General introduction
BS 6829-1.1
1987
Analysis of surface active agents (raw materials). General methods. Method for determination of mineral sulphate content
BS 6829-1.3
1988
Analysis of surface active agents (raw materials). General methods. Method for determination of alkalinity
BS 6829-1.5
1990
Analysis of surface active agents (raw materials). General methods. Methods for determination of water content
BS 6829-1.6
1991
Analysis of surface active agents (raw materials). General methods. Method for determination of solubility in water
BS 6829-2.1
1988
Analysis of surface active agents (raw materials). Alkane sulphonates. Method for determination of total alkaline sulphonates content
BS 6829-2.3
1989
Analysis of surface active agents (raw materials). Alkane sulphonates. Method for determination of alkane monosulphonates content
BS 6829-4.1
1991
Analysis of surface active agents (raw materials). Ethylene oxide adducts. Methods for determination of cloud temperature (cloud point)
BS 6829-4.2
1989
Analysis of surface active agents (raw materials). Ethylene oxide adducts. Method for determination of polyethylene glycols and non-ionic active matter contents
BS 6829-4.3
1990
Analysis of surface active agents (raw materials). Ethylene oxide adducts. Method for determination of oxyethylene groups
BS 6829-4.5
1989
Analysis of surface active agents (raw materials). Ethylene oxide adducts. Method for determination of sulphated ash
BS 6829-4.6
1988
Analysis of surface active agents (raw materials). Ethylene oxide adducts. Method for determination of hydroxyl value
BS 6829-5.1
1990
Analysis of surface active agents (raw materials). Ethoxylated alcohol and alkylphenol sulphates. Method for determination of total active matter content
BS 6829-5.2
1989
Analysis of surface active agents (raw materials). Ethoxylated alcohol and alkylphenol sulphates. Method for estimation of mean relative molecular mass
BS 6831
1987
Specification for industrial real-time FORTRAN
BS 6832
1987
Method for specifying requirements for a FORTRAN language processor
BS 6833:1
1987
Apparatus using cordless attachments (excluding cellular radio apparatus) for connection to analogue interfaces of public switched telephone networks. Specification for general requirements
BS 6833:2
1992
Apparatus using cordless attachments (excluding cellular radio apparatus) for connection to analogue interfaces of public switched telephone networks. Specification for cordless telephone apparatus using radio links
BS 6833:3
1992
Apparatus using cordless attachments (excluding cellular radio apparatus) for connection to analogue interfaces of public switched telephone networks. Specification for the simple call routeing mode of cordless PBX operation with analogue interfaces to th
BS 6833:5
1991
Apparatus using cordless attachments (excluding cellular radio apparatus) for connection to analogue interfaces of public switched telephone networks. Specification for the cordless elements within PBX apparatus with analogue interfaces to the PSTN and te
BS 6834
1987
Specification for active anaesthetic gas scavenging systems
BS 6837
1987
Specification for plan dimensions of rigid rectangular transport packages with a modular relationship to 1200 mm x 1000 mm and 1200 mm x 800 mm pallets and unit loads
BS 6840:1
1987
Sound system equipment. Methods for specifying and measuring general characteristics used for equipment performance
BS 6840:2
1993
Sound system equipment. Glossary of general terms and calculation methods
BS 6840:3
1992
Sound system equipment. Methods for specifying and measuring the characteristics of sound system amplifiers
BS 6840:4
1997
Sound system equipment. Microphones
BS 6840:6
1987
Sound system equipment. Methods for specifying and measuring the characteristics of auxiliary passive elements
BS 6840:8
1988
Sound system equipment. Methods for specifying and measuring the characteristics of automatic gain control devices
BS 6840:9
1987
Sound system equipment. Methods for specifying and measuring the characteristics of artificial reverberation, time delay and frequency shift equipment
BS 6840:10
1991
Sound system equipment. Methods for specifying and measuring the characteristics of peak programme level meters
BS 6840:11
1994
Sound system equipment. Specification for application of connectors for the interconnection of sound system components
BS 6840:13
1998
Sound system equipment. Listening tests on loudspeakers
BS 6840:14
1987
Sound system equipment. Guide for circular and elliptical loudspeakers; outer frame diameters and mounting dimensions
BS 6840:16
1989
Sound system equipment. Guide to the 'RASTI' method for the objective rating of speech intelligibility in auditoria
BS 6840:17
1991
Sound system equipment. Methods for specifying and measuring the characteristics of standard volume indicators
BS 6840:18
1996
Sound system equipment. Peak programme level meters. Guide for digital audio level meter
BS 6841
1987
Guide to measurement and evaluation of human exposure to whole-body mechanical vibration and repeated shock
BS 6842
1987
Guide to measurement and evaluation of human exposure to vibration transmitted to the hand
BS 6843:0
1988
Classification of petroleum fuels. General classification
BS 6843:1
1996
Classification of petroleum fuels. Marine fuels
BS 6843:2
1988
Classification of petroleum fuels. Gas turbine fuels for industrial and marine applications
BS 6843:3
1988
Classification of petroleum fuels. Liquefied petroleum gases
BS 6845
1996
Method for evaluation of vulcanization characteristics of halogenated isobutene-isoprene rubber (BIIR and CIIR)
BS 6847
1987
Specification for plastics hoses for suction and low-pressure discharge of petroleum liquids
BS 6849
1987
Specification for drop-forged rivetless chains for conveyors
BS 6850
2002
Gas powered ventilatory resuscitators
BS 6851
1987
Method for preparing a statement of requirements for hydraulic fluid power filters
BS 6852
1987
Specification for dimensions of housings for hydraulic cylinder piston rod wiper rings in reciprocating applications
BS 6853
1999
Code of practice for fire precautions in the design and construction of passenger carrying trains
BS 6855
1987
Recommendations for design and construction of glass splash heads for laboratory use
BS 6856
1987
Specification for code extension techniques for United Kingdom 7-bit and 8-bit coded character sets
BS 6857
1987
Specification for cadmium pigments for paints
BS 6858
1987
Specification for manually operated positioning devices and associated anchorage lines for use with industrial safety belts and harnesses
BS 6859:1
1987
Operating tables. Specification for mobile general operating tables
BS 6859:2
1987
Operating tables. Specification for fixed-pedestal general operating tables
BS 6860
1987
Nomenclature for cereals, pulses and other food grains
BS 6861:1
1987
Mechanical vibration. Balance quality requirements of rigid rotors. Method for determination of permissible residual unbalance
BS 6861:2
1997
Mechanical vibration. Balance quality requirements of rigid rotors. Balance errors
BS 6862:1
1971
Specification for cables for vehicles. Cables with copper conductors
BS 6865
1987
Specification for time and control codes for video tape recorders
BS 6865
1990
Specification for time and control codes for video tape recorders
BS 6867
1987
Code of practice for maintenance of electrical switchgear for voltages above 36 kV
BS 6868
1987
Specification for standard generalized markup language (SGML) for text and office systems
BS 6870-2.1
1987
Analysis of aluminium ores. Chemical methods. Method of preparation of pre-dried test samples
BS 6870-2.2
1987
Analysis of aluminium ores. Chemical methods. Method for determination of hygroscopic moisture in analytical samples: gravimetric method
BS 6870-2.3
1987
Analysis of aluminium ores. Chemical methods. Method for determination of loss of mass at 1075°C: gravimetric method
BS 6870-2.4
1987
Analysis of aluminium ores. Chemical methods. Method for determination of silicon content: combined gravimetric and spectrophotometric method
BS 6870-2.5
1987
Analysis of aluminium ores. Chemical methods. Method for determination of iron content: titrimetric method
BS 6870-2.6
1987
Analysis of aluminium ores. Chemical methods. Method for determination of aluminium content: EDTA titrimetric method
BS 6870-2.7
1987
Analysis of aluminium ores. Chemical methods. Method for determination of titanium content: spectrophotometric method
BS 6870-2.8
1987
Analysis of aluminium ores. Chemical methods. Method for determination of phosphorus content: spectrophotometric method
BS 6870:3
1989
Analysis of aluminium ores. Method for multi-element analysis by wavelength dispersive X-ray fluorescence
BS 6873
1988
Specification for filament lamps for cycles
BS 6874
1987
Specification for dimensions and density of cotton bales
BS 6875
1987
Glossary of terms for and classification of knitting machines
BS 6876
1987
Specification for numbering of machine parts for drawing-in on Jacquard machines
BS 6878
1988
Specification for high-voltage switchgear and controlgear for industrial use. Cast aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear
BS 6879
1999
Code for the representation of names of counties and similar areas
BS 6880:1
1988
Code of practice for low temperature hot water heating systems of output greater than 45 kW. Fundamental and design considerations
BS 6880:2
1988
Code of practice for low temperature hot water heating systems of output greater than 45 kW. Selection of equipment
BS 6880:3
1988
Code of practice for low temperature hot water heating systems of output greater than 45 kW. Installation, commissioning and maintenance
BS 6882
1987
Guide for storage of raw solid natural and synthetic rubber
BS 6883
1999
Elastomer insulated cables for fixed wiring in ships and on mobile and fixed offshore units. Requirements and test methods
BS 6884
1987
Recommendations for plan dimensions of unit loads
BS 6885
1988
Specification for miniature cartridge fuse links for use on printed wiring boards
BS 6886
1987
Specification for alumino-silicate refractories for use in coke ovens
BS 6888
1988
Methods for calibration of bonded electrical resistance strain gauges
BS 6889
1987
Specification for generating racks for synchronous belt drive pulleys
BS 6890
1987
Method for determination of grease resistance of paper and board
BS 6890
1992
Method for determination of grease resistance of paper and board
BS 6891
2005
Specification for installation of low pressure gas pipework of up to 28 mm (R1) in domestic premises (2nd family gas)
BS 6894
1987
Specification for jute hessian tubing
BS 6896
2005
Specification for installation of gas-fired overhead radiant heaters for industrial and commercial heating (2nd and 3rd family gases)
BS 6897:1
1987
Experimental determination of mechanical mobility. Specification for transducers
BS 6897:2
1990
Methods for experimental determination of mechanical mobility. Measurements using single-point translation excitation with an attached vibration exciter
BS 6897:5
1995
Experimental determination of mechanical mobility. Measurement using impact excitation with an exciter which is not attached to the structure
BS 6898
1987
Specification for glass centrifuge tubes for general laboratory use
BS 6899
1991
Specification for rubber insulation and sheath of electric cables
BS 6899
1992
Specification for rubber insulation and sheath of electric cables
BS 6900
1987
Specification for raw, refined and boiled linseed oils for paints and varnishes
BS 6901
1987
Specification for rating and performance of air source heat pumps with electrically driven compressors
BS 6904
1987
Guide for cable connections for gas-insulated metal-enclosed switchgear for rated voltages of 72.5 kV and above
BS 6905
1987
Method for estimation of concentration of disinfectants used in 'dirty' conditions in hospitals by the modified Kelsey-Sykes test
BS 6905
1994
Method for estimation of concentration of disinfectants used in 'dirty' conditions in hospitals by the modified Kelsey-Sykes test
BS 6906:2
1989
Methods of test for geotextiles. Determination of the apparent pore size distribution by dry sieving
BS 6906:3
1989
Methods of test for geotextiles. Determination of water flow normal to the plane of the geotextile under a constant head
BS 6906:5
1991
Methods of test for geotextiles. Determination of creep
BS 6906-6
1990
Methods of test for geotextiles. Determination of resistance to perforation (cone drop test)
BS 6906:7
1990
Methods of test for geotextiles. Determination of in-plane waterflow
BS 6906:8
1991
Methods of test for geotextiles. Determination of sand-geotextile frictional behaviour by direct shear
BS 6907:1
1988
Electrical installations for open-cast mines and quarries. Glossary
BS 6907:2
1988
Electrical installations for open-cast mines and quarries. General recommendations for protection against direct contact and electric shock
BS 6907:3
1988
Electrical installations for open-cast mines and quarries. Recommendations for equipment and ancillaries
BS 6907:4
1988
Electrical installations for open-cast mines and quarries. Recommendations for winning, stacking and processing machinery, pumps and low signal level and communications systems
BS 6907:5
1988
Electrical installations for open-cast mines and quarries. Recommendations for operation
BS 6909
1988
Method for generation and counting of the airborne linting propensity of fabrics in the dry state
BS 6910:1
1988
Cold pour resin compound and heat-shrink cable joints in the voltage range up to 1000 V a.c. and 1500 V d.c. Specification for materials
BS 6910:2
1989
Cold pour resin compound and heat-shrink cable joints in the voltage range up to 1000 V a.c. and 1500 V d.c. Code of practice for on-site installation
BS 6911:1
1988
Testing earth-moving machinery. Method for determination of volumetric rating of crawler and wheel tractor dozer blades
BS 6911:2
1990
Testing earth-moving machinery. Measurement of tool forces and tipping loads of loaders
BS 6911:3
1990
Testing earth-moving machinery. Measurement of tool forces of hydraulic excavators
BS 6911:4
1998
Testing earth-moving machinery. Engine test code. Net power
BS 6911:5
1992
Testing earth-moving machinery. Determination of operator's field of view
BS 6911:6
1992
Testing earth-moving machinery. Method for the evaluation of lift capacity of pipelayers and wheel tractors or loaders equipped with side boom
BS 6911:7
1992
Testing earth-moving machinery. Testing of earth-moving machinery. Specification for units of measurement and tolerances
BS 6911:8
1993
Testing earth-moving machinery. Determination of slope limits for machine fluid systems operation (static test method)
BS 6911:9
1993
Testing earth-moving machinery. Verification of retarder capability of dumpers and tractor-scrapers
BS 6911:10
1996
Testing earth-moving machinery. Machine-mounted retrieval device. Performance requirements
BS 6911:11
1997
Testing earth-moving machinery. Method for the determination of volumetric ratings for hydraulic excavator buckets and backhoe loader buckets
BS 6911:12
1998
Testing earth-moving machinery. Determination of turning dimensions of wheeled machines
BS 6911:13
1998
Testing earth-moving machinery. Methods of measuring the masses of whole machines, their equipment and components
BS 6911:14
1998
Testing earth-moving machinery. Crawler machines. Performance requirements and test procedures for braking systems
BS 6912:18
1995
Safety of earth-moving machinery. Specification for bluntness of edges at the operator station and in maintenance areas
BS 6912:19
1996
Safety of earth-moving machinery. Specification for dimensions and requirements for operator's seat
BS 6912:20
1996
Safety of earth-moving machinery. Specification for operator's controls
BS 6912:21
1996
Safety of earth-moving machinery. Specification for lighting, signalling and marking lights, and reflex-reflector devices
BS 6912:22.1
1996
Safety of earth-moving machinery. Operator enclosure environment. General and definitions
BS 6912:22.3
1996
Safety of earth-moving machinery. Operator enclosure environment. Operator enclosure pressurization test method
BS 6912:22.4
1996
Safety of earth-moving machinery. Operator enclosure environment. Operator enclosure ventilation, heating and/or air-conditioning test method
BS 6912:22.5
1996
Safety of earth-moving machinery. Operator enclosure environment. Windscreen defrosting system test method
BS 6912:22.6
1996
Safety of earth-moving machinery. Operator enclosure environment. Determination of the effect of solar heating on the operator enclosure
BS 6912:23
1996
Safety of earth-moving machinery. Safety signs and hazard pictorials. General principles
BS 6912:1
1997
Safety of earth-moving machinery. Specification for hydraulic excavator and backhoe loader boom lowering control device
BS 6912:2
1989
Safety of earth-moving machinery. Specification for rated operating load for crawler and wheel loaders
BS 6912:3
1990
Safety of earth-moving machinery. Sound test method for machine-mounted forward and reverse warning alarm
BS 6912:4
1991
Safety of earth-moving machinery. Specification for key-locked starting systems
BS 6912:6
1992
Safety of earth-moving machinery. Specification for falling-object protective structures on earth-moving machinery: Laboratory tests and performance requirements
BS 6912:7
1992
Safety of earth-moving machinery. Specification for laboratory evaluations of roll-over and falling-object protective structures: the deflection-limiting volume for earth-moving machinery
BS 6912:8
1992
Safety of earth-moving machinery. Specification for performance requirements of an articulated frame locking device
BS 6912:9
1992
Safety of earth-moving machinery. Methods for the calculation and verification of the lift capacity of hydraulic excavators
BS 6912:12
1993
Safety of earth-moving machinery. Evaluation of operator's field of view
BS 6912:13
1993
Safety of earth-moving machinery. Acceptance criteria for operator's field of view
BS 6912:16
1995
Safety of earth-moving machinery. Specification for dumper body support and operator's cab tilt support devices
BS 6913:1
1989
Operation and maintenance of earth-moving machinery. Guide to common maintenance and adjustment service tools
BS 6913:3
1998
Operation and maintenance of earth-moving machinery. Specification for cutting edges used on tractor-dozers, graders and scrapers. Principal shapes and basic dimensions
BS 6913:4
1997
Operation and maintenance of earth-moving machinery. Recommendations for service instrumentation
BS 6913:5
1990
Operation and maintenance of earth-moving machinery. Specification for diagnostic ports
BS 6913:6
1991
Operation and maintenance of earth-moving machinery. Specification for identification and marking of electrical wires and cables
BS 6913:7
1991
Operation and maintenance of earth-moving machinery. Glossary for machine availability
BS 6913:8
1992
Operation and maintenance of earth-moving machinery. Specification for common symbols for operator controls and other displays
BS 6913:9
1994
Operation and maintenance of earth-moving machinery. Specification for specific symbols for machines, equipment and accessories
BS 6913:10
1994
Operation and maintenance of earth-moving machinery. Specification for drain, fizz and level plugs
BS 6913:11
1994
Operation and maintenance of earth-moving machinery. Specification for auxiliary starting aid electrical connector
BS 6913:12
1995
Operation and maintenance of earth-moving machinery. Specification for a product identification numbering system
BS 6913:13
1997
Operation and maintenance of earth-moving machinery. Specification for lubrication fittings. Nipple type
BS 6913:14
1997
Operation and maintenance of earth-moving machinery. Specification for lubrication fittings. Grease-gun nozzles
BS 6913:15
1997
Operation and maintenance of earth-moving machinery. Specification for service tools. Mechanical pullers and pushers
BS 6914:2
1988
Terminology (including definitions of dimensions and symbols) for earth-moving machinery. Glossary of terms for base machine
BS 6914:3
1988
Terminology (including definitions of dimensions and symbols) for earth-moving machinery. Glossary of terms for equipment
BS 6914:4
1990
Terminology (including definitions of dimensions and symbols) for earth-moving machinery. Glossary for dumpers
BS 6914:5
1999
Terminology (including definitions of dimensions and symbols) for earth-moving machinery. Glossary for pipelayers
BS 6914:6
1999
Terminology (including definitions of dimensions and symbols) for earth-moving machinery. Terminology and commercial specifications for self-propelled crawler and wheel tractors and their equipment
BS 6914:7
1992
Terminology (including definitions of dimensions and symbols) for earth-moving machinery. Vocabulary, symbols and units for machine performance
BS 6914:8
1993
Terminology (including definitions of dimensions and symbols) for earth-moving machinery. Terminology and commercial specifications for hydraulic excavators
BS 6914:9
1996
Terminology (including definitions of dimensions and symbols) for earth-moving machinery. Terminology and commercial specifications for tractor-scrapers
BS 6914:10
1998
Terminology (including definitions of dimensions and symbols) for earth-moving machinery. Terminology and commercial specifications for loaders
BS 6915
2001
Design and construction of fully supported lead sheet roof and wall coverings. Code of practice
BS 6916:2
1996
Chain saws. Technical data
BS 6916:3
1988
Chain saws. Specification for dimensions of front hand guards
BS 6916:4
1988
Chain saws. Specification for strength of front hand guards
BS 6916:5
1988
Chain saws. Methods of evaluating chain brake performance
BS 6916:6
1988
Chain saws. Method of measurement of airborne noise at the operator's position
BS 6916:7
1998
Chain saws. Method of evaluating engine performance including fuel consumption
BS 6916:8
1988
Chain saws. Method of measurement of hand-transmitted vibration
BS 6916:9
1988
Chain saws. Specification for strength of handles
BS 6916:10
1988
Chain saws. Specification for longitudinal balance
BS 6920-1
2000
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. Specification
BS 6920-2.1
2000
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water. Methods of test. Samples for testing
BS 6920-2.2.1
2000
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water. Methods of test. Odour and flavour of water. General method of test
BS 6920-2.2.3
2000
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water. Methods of test. Odour and flavour of water. Method of testing odours and flavours imparted to water by
BS 6920-2.4
2000
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water. Methods of test. GStandardth of aquatic microorganisms test
BS 6920-2.5
2000
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water. Methods of test. The extraction of substances that may be of concern to public health
BS 6920-2.6
2000
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water. Methods of test. The extraction of metals
BS 6920:3
2000
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. High temperature tests
BS 6920:4
2001
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. Method for the GCMS identification of water leachable organic substances
BS 6921
1988
Method for evaluation of the thermal endurance of flexible sheet electrical insulating materials using the wrapped tube method
BS 6923
1988
Method for calculation of small colour differences
BS 6924
1988
Method for determination of corrosiveness of liquefied petroleum gases to copper
BS 6925
1988
Specification for mastic asphalt for building and civil engineering (limestone aggregate)
BS 6931
1988
Glossary of terms for copper and copper alloys
BS 6932
1988
Method for measurement of the effective focal spot size of mini-focus and micro-focus X-ray tubes used for industrial radiography
BS 6934
1988
Specification for dental root canal sealing materials
BS 6934
1991
Specification for dental root canal sealing materials
BS 6935:5
1988
Wheelchair tests. Methods for determination of overall dimensions, mass and turning space
BS 6936
1988
Method for designation of types of wheelchair
BS 6937
1988
Glossary of wheelchair terms
BS 6938
1988
Recommendations for documentation of the preparation of certified reference materials for metallurgical analysis of non-ferrous metals
BS 6940-1
1990
Total Access Communication System (T.A.C.S). Specification for performance requirements for mobile stations
BS 6940-2
1990
Total Access Communication System (T.A.C.S). Specification for performance and tests of the signalling system of mobile stations
BS 6942-2
1989
Design and construction of small kits for oxy-fuel gas welding and allied processes. Specification for kits using refillable gas containers for oxygen and fuel gas
BS 6943
1988
Classification of shapes of electronic components for placement on printed wiring boards
BS 6944
1988
Specification for flash welding of butt joints in ferrous metals (excluding pressure piping applications)
BS 6946
1988
Specification for metal channel cable support systems for electrical installations
BS 6946
1990
Specification for metal channel cable support systems for electrical installations
BS 6947
1988
Specification for acid oils and recovered fatty acid distillates
BS 6948
1989
Methods of test for mechanically fastened joints in timber and wood-based materials
BS 6948
1992
Methods of test for mechanically fastened joints in timber and wood-based materials
BS 6949
1991
Specification for bitumen-based coatings for cold application excluding use in contact with potable water
BS 6949
1992
Specification for bitumen-based coatings for cold application excluding use in contact with potable water
BS 6953
1988
Glossary of terms for procedures for setting out, measurement and surveying in building construction (including guidance notes)
BS 6954:1
1988
Tolerances for building. Recommendations for basic principles for evaluation and specification
BS 6954:2
1988
Tolerances for building. Recommendations for statistical basis for predicting fit between components having a normal distribution of sizes
BS 6954:3
1988
Tolerances for building. Recommendations for selecting target size and predicting fit
BS 6955:1
1994
Calibration of vibration and shock pick-ups. Methods for primary vibration calibration by laser interferometry
BS 6955:2
1994
Calibration of vibration and shock pick-ups. Methods for primary shock calibration by light cutting
BS 6955:3
1994
Calibration of vibration and shock pick-ups. Methods for secondary vibration calibration
BS 6955:4
1994
Calibration of vibration and shock pick-ups. Method for secondary shock calibration
BS 6955:5
1994
Calibration of vibration and shock pick-ups. Method for calibration by earth's gravitation
BS 6955:6
1994
Calibration of vibration and shock pick-ups. Method for primary vibration calibration at low frequencies
BS 6955:7
1994
Calibration of vibration and shock pick-ups. Methods for primary calibration by centrifuge
BS 6955:8
1994
Calibration of vibration and shock pick-ups. Method for primary calibration by dual centrifuge
BS 6955:9
1994
Calibration of vibration and shock pick-ups. Method for secondary vibration calibration by comparison of phase angles
BS 6955:10
1994
Calibration of vibration and shock pick-ups. Method for primary calibration by high impact shocks
BS 6955:11
1994
Calibration of vibration and shock pick-ups. Method of test for transverse vibration sensitivity
BS 6955:12
1994
Calibration of vibration and shock pick-ups. Method of test for transverse shock sensitivity
BS 6955:13
1994
Calibration of vibration and shock pick-ups. Method of test for base strain sensitivity
BS 6955:14
1994
Calibration of vibration and shock pick-ups. Method of test for resonance frequency of undamped accelerometers on a steel block
BS 6955:15
1994
Calibration of vibration and shock pick-ups. Method of test for acoustic sensitivity
BS 6955:16
1994
Calibration of vibration and shock pick-ups. Method of test for mounting torque sensitivity
BS 6955:17
1994
Calibration of vibration and shock pick-ups. Method of test for fixed temperature sensitivity
BS 6955:18
1994
Calibration of vibration and shock pick-ups. Method of test for transient temperature sensitivity
BS 6955:19
1994
Calibration of vibration and shock pick-ups. Method of test for magnetic field sensitivity
BS 6955:20
1997
Calibration of vibration and shock pick-ups. Primary vibration calibration by the reciprocity method
BS 6955:22
1997
Calibration of vibration and shock pick-ups. Accelerometer resonance testing. General methods
BS 6956:1
1988
Jointing materials and compounds. Specification for corrugated metal joint rings
BS 6956:5
1992
Jointing materials and compounds. Specification for jointing compounds for use with water, low pressure saturated steam, 1st family gases (excluding coal gas) and 2nd family gases
BS 6958:1
1988
Guide to construction and use of 90 mm (3.5 in) flexible disk cartridges for data interchange, using modified frequency modulation recording at 7958 ftprad, 5.3 tpmm (135 tpi) on 80 tracks on each side. Dimensional, physical and magnetic characteristics
BS 6958:2
1988
Guide to construction and use of 90 mm (3.5 in) flexible disk cartridges for data interchange, using modified frequency modulation recording at 7958 ftprad, 5.3 tpmm (135 tpi) on 80 tracks on each side. Track format
BS 6959
1989
Code of practice for selection, installation, use and maintenance of apparatus for the detection and measurement of combustible gases (other than for mining applications or explosives processing and manufacture)
BS 6962
1988
Open Systems Interconnection: specification for Abstract Syntax Notation One (ASN.1)
BS 6963
1988
Open Systems Interconnection. Specification for basic encoding rules for Abstract Syntax Notation One (ASN.1)
BS 6965:1
1988
Creasing properties of carton board. Method for determination of crease recovery (spring back) of 90° fold
BS 6968
1988
Guide for use and maintenance of non-calibrated round steel lifting chain and chain slings
BS 6972
1988
Specification for general requirements for luminaire supporting couplers for domestic, light industrial and commercial use
BS 6975
1988
Specification for non-metallic tensional strapping
BS 6978:1
1988
Seed drills. Methods of test for single seed drills
BS 6978:2
1990
Seed drills. Methods of test for seed drills for Standards
BS 6979
1990
Method for measurement of static deflection of power presses
BS 6979
1989
Method for measurement of static deflection of power presses
BS 6981
1988
Method for determination of acid content of wool
BS 6983
1988
Methods for determination and expression of entrance field sizes of electro-optical X-ray image intensifiers
BS 6983
1992
Methods for determination and expression of entrance field sizes of electro-optical X-ray image intensifiers
BS 6984
1988
Specification for dimensions of housings for elastomer-energized plastic-faced hydraulic seals in reciprocating applications
BS 6985
1989
Specification for dual-scale and ovulation clinical maximum thermometers (mercury-in-glass, enclosed scale)
BS 6986:1
1988
Analysis of instant tea. Methods of sampling
BS 6986:2
1988
Analysis of instant tea. Methods for determination of free-flow and compacted bulk densities
BS 6986:3
1990
Analysis of instant tea. Method for determination of moisture content (loss in mass at 103°C)
BS 6986:4
1990
Analysis of instant tea. Method for determination of total ash
BS 6988
1989
Method for determination of the adhesion of autoclave tape to tray wrap material
BS 6989
1989
Guide to safety of storage equipment for loose bulk materials
BS 6990
1989
Code of practice for welding on steel pipes containing process fluids or their residuals
BS 6991
1990
Specification for 6/10 A, two-pole weather-resistant couplers for household, commercial and light industrial equipment
BS 6992
1988
Capacities and related cross sections of open-top cans for food and drinks
BS 6993:1
1989
Thermal and radiometric properties of glazing. Method for calculation of the steady state U-value (thermal transmittance)
BS 6993:2
1990
Thermal and radiometric properties of glazing. Method for direct measurement of U-value (thermal transmittance)
BS 6994
1988
Specification for steel shackles for lifting and general engineering purposes: grade M(4)
BS 6995
1997
Method for evaluation of vulcanization characteristics of styrene-butadiene rubber (SBR, YSBR) (emulsion and solution-polymerized types)
BS 6996
2003
Mineral oil resistant acrylonitrile-butadiene rubber compounds. Specification
BS 6997
1990
Specification for elastomeric toroidal sealing rings ('O'-rings) manufactured from acrylonitrile-butadiene rubbers complying with BS 6996
BS 6999
1995
Specification for vitreous-enamelled low-carbon-steel flue pipes, other components and accessories for solid-fuel-burning appliances with a rated output of 45 kW
BS 6999
1989
Specification for vitreous-enamelled low-carbon-steel flue pipes, other components and accessories for solid-fuel-burning appliances with a rated output of 45 kW
BS 7000:1
1999
Design management systems. Guide to managing innovation
BS 7000:2
1997
Design management systems. Guide to managing the design of manufactured products
BS 7000:3
1994
Design management systems. Guide to managing service design
BS 7000:4
1996
Design management systems. Guide to managing design in construction
BS 7000:5
2001
Design management systems. Design management systems. Guide to managing obsolescence
BS 7000:10
1995
Design management systems. Glossary of terms used in design management
BS 7001
1998
Specification for interchangeability and safety of a standardized luminaire supporting coupler
BS 7003
1988
Specification for spring-operated impact-test apparatus and its calibration
BS 7005
1988
Specification for design and manufacture of carbon steel unfired pressure vessels for use in vapour compression refrigeration systems
BS 7006
1989
Specification for trailed agricultural rollers
BS 7007:2
1994
Abrasive products. Specification for designation and dimensions of coated abrasive flap wheels with shafts
BS 7007-3
1998
Abrasive products. Specification for dimensional tolerances on non-standard coated abrasive products
BS 7007:5
1994
Abrasive products. Specification for dimensions, tolerances and designation of abrasive belts
BS 7007:6
1994
Abrasive products. Specification for dimensions, tolerances and designation of abrasive sheets
BS 7009
1988
Guide to application of real-time radiography to weld inspection
BS 7010
1988
Code of practice for a system of tolerances for the dimensions of plastics mouldings
BS 7011:0
1989
Consumable accessories for light microscopes. General introduction
BS 7011-1.1
1998
Consumable accessories for light microscopes. Immersion oils. Specification for immersion oils for general use
BS 7011:3.1
1989
Consumable accessories for light microscopes. Cover glasses. Specification for dimensions and optical properties
BS 7011-3.2
1998
Consumable accessories for light microscopes. Cover glasses. Specification for materials and quality of finish
BS 7012:1
1998
Light microscopes. Specification for the magnifying power of microscope imaging components
BS 7012:3
1997
Light microscopes. Imaging distances related to mechanical reference planes for tube length 160 mm
BS 7012:6
1998
Light microscopes. Specification for spectral filters
BS 7012:8
1997
Light microscopes. Graticules for eyepieces
BS 7012:9
1997
Light microscopes. Specification for interfacing connection type C
BS 7012-10.1
1998
Light microscopes. Minimum requirements for stereo microscopes. Stereo microscopes for general use
BS 7012-10.2
1997
Light microscopes. Minimum requirements for stereo microscopes. High performance microscopes
BS 7012-10.4
1998
Light microscopes. Minimum requirements for stereo microscopes. Information provided to the user
BS 7012:11
1998
Light microscopes. Information provided to the user
BS 7012:12
1997
Light microscopes. Reference system of polarized light microscopy
BS 7012:13
1997
Light microscopes. Interfacing connection for 35 mm SLR photo cameras (T-thread adaptation)
BS 7012:14
1997
Light microscopes. Marking of stereomicroscopes
BS 7012:15
1997
Light microscopes. Marking of objectives and eyepieces
BS 7012:16
2001
Light microscopes. Diameter of interchangeable eyepieces
BS 7014
1989
Guide to the romanization of Chinese
BS 7015
1989
Specification for cast acrylic sheet for baths and shower trays for domestic purposes
BS 7016:1
1988
Components and systems of reciprocating internal combustion engines. Glossary of terms for structure and external covers
BS 7016:2
1988
Components and systems of reciprocating internal combustion engines. Glossary of terms for main running gear
BS 7016-3
1998
Components and systems of reciprocating internal combustion engines. Glossary of terms for valves, camshaft drive and actuating mechanisms
BS 7016-4
1998
Components and systems of reciprocating internal combustion engines. Glossary of terms for pressure charging and air/exhaust gas ducting systems
BS 7016:5
1992
Components and systems of reciprocating internal combustion engines. Glossary of terms for cooling systems
BS 7016:6
1992
Components and systems of reciprocating internal combustion engines. Glossary of terms for lubricating systems
BS 7016:7
1999
Components and systems of reciprocating internal combustion engines. Governing systems
BS 7016:8
1996
Components and systems of reciprocating internal combustion engines. Glossary of terms for starting systems
BS 7018
1988
Guide to use of electrical insulating materials containing asbestos
BS 7019
1989
Specification for fully screened 400 A bolted flameproof cable couplers and adaptors for use on systems up to and including 6.6 kV, primarily for use in mines
BS 7020:1
1988
Analysis of iron ores. Method for the preparation of pre-dried test samples for chemical analysis
BS 7020:3
1988
Analysis of iron ores. Method for the determination of combined water content
BS 7020:4.2
1990
Analysis of iron ores. Method for the determination of total iron content. Titanium (III) chloride reduction methods
BS 7020:4.3
1990
Analysis of iron ores. Method for the determination of total iron content. Silver reduction titrimetric method
BS 7020:5.1
1993
Analysis of iron ores. Methods for the determination of silicon content. Gravimetric methods
BS 7020:5.2
1993
Analysis of iron ores. Methods for the determination of silicon content. Reduced molybdosilicate spectrophotometric method
BS 7020:6.1
1988
Analysis of iron ores. Methods for the determination of phosphorus content. Titrimetric method
BS 7020:6.2
1993
Analysis of iron ores. Methods for the determination of phosphorus content. Molybdenum blue spectrophotometric method
BS 7020:7.1
1988
Analysis of iron ores. Methods for the determination of sulphur content. Gravimetric method
BS 7020:7.2
1988
Analysis of iron ores. Methods for the determination of sulphur content. Combustion method
BS 7020:8.1
1988
Analysis of iron ores. Methods for the determination of aluminium content. Titrimetric method
BS 7020:8.2
1993
Analysis of iron ores. Methods for the determination of aluminium content. Flame atomic absorption spectrometric method
BS 7020:9.1
1988
Analysis of iron ores. Methods for the determination of manganese content. Spectrophotometric method
BS 7020:9.2
1993
Analysis of iron ores. Methods for the determination of manganese content. Flame atomic absorption spectrometric method
BS 7020:10.2
1988
Analysis of iron ores. Methods for the determination of copper content. Flame atomic absorption spectrometric method
BS 7020:11.1
1993
Analysis of iron ores. Methods for the determination of vanadium content. BPHA spectrophotometric method
BS 7020:11.2
1993
Analysis of iron ores. Methods for the determination of vanadium content. Flame atomic absorption spectrometric method
BS 7020:12
1988
Analysis of iron ores. Method for the determination of titanium content: spectrophotometric method
BS 7020:13
1988
Analysis of iron ores. Method for the determination of arsenic content: spectrophotometric method
BS 7020:15
1993
Analysis of iron ores. Methods for the determination of calcium content: flame atomic absorption spectrometric method
BS 7020:16
1993
Analysis of iron ores. Methods for the determination of nickel and/or chromium contents: flame atomic absorption spectrometric method
BS 7020:17
1988
Analysis of iron ores. Method for the determination of lead and/or zinc contents: flame atomic absorption spectrometric method
BS 7020:18
1993
Analysis of iron ores. Methods for the determination of magnesium content: flame atomic absorption spectrometric method
BS 7020:19
1988
Analysis of iron ores. Method for the determination of fluorine content: ion-selective electrode method
BS 7020:20
1990
Analysis of iron ores. Method for the determination of water soluble chloride content: ion-selective electrode method
BS 7020:22
1990
Analysis of iron ores. Method for the determination of acid-soluble iron (II) content: titrimetric method
BS 7021
1989
Code of practice for thermal insulation of roofs externally by means of sprayed rigid polyurethane (PUR) or polyisocyanurate (PIR) foam
BS 7022
1988
Guide for geophysical logging of boreholes for hydrogeological purposes
BS 7023:1
1988
Guide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data interchange using modified frequency modulation recording at 7958 ftprad, 3.8 tpmm (96 tpi) on both sides. Dimensional, physical and magnetic characteristics
BS 7023:2
1988
Guide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data interchange using modified frequency modulation recording at 7958 ftprad, 3.8 tpmm (96 tpi) on both sides. Track format A
BS 7023:3
1988
Guide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data interchange using modified frequency modulation recording at 7958 ftprad, 3.8 tpmm (96 tpi) on both sides. Track format B
BS 7024:2
1988
Guide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data interchange using modified frequency modulation recording at 7958 ftprad, 1.9 tpmm (48 tpi) on both sides. Track format A
BS 7024:3
1988
Guide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data interchange using modified frequency modulation recording at 7958 ftprad, 1.9 tpmm (48 tpi) on both sides. Track format B
BS 7025
1988
Method for preparation of test codes of engineering grade for measurement at the operator's or bystander's position of noise emitted by machinery
BS 7026
1989
Method for detection of hydrogen sulphide in liquefied petroleum gases using lead acetate
BS 7027
1990
Specification for limits and methods of measurement of the immunity of marine electrical and electronic equipment to conducted and radiated electromagnetic interference
BS 7028
1999
Eye protection for industrial and other uses. Guidance on selection, use and maintenance
BS 7029:1
1993
Method of specifying thermoplastics injection mouldings. General requirements
BS 7029:2
1993
Method of specifying thermoplastics injection mouldings. Additional requirements for polycarbonate, polyamide and polyethylene mouldings
BS 7030
1988
Method for determination of the coefficient of mean linear thermal expansion of glass
BS 7031
1988
Specification for colours of gold alloys
BS 7032
1988
Method for determination of phosphorus content of lubricating oils and additives by a quinoline phosphomolybdate procedure
BS 7033:1
1989
Cleaning and polishing cloths. Specification for optical polishing cloths for use on transparent plastics panels
BS 7033:2
1989
Cleaning and polishing cloths. Specification for industrial wipers from reclaimed materials, and waste yarn for cleaning and lubricating purposes
BS 7033:3
1989
Cleaning and polishing cloths. Specification for floorcloths and dishcloths
BS 7033:4
1990
Cleaning and polishing cloths. Specification for window cleaning cloths
BS 7033:5
1990
Cleaning and polishing cloths. Specification for general polishing cloths
BS 7034:1
1988
Viscosity and viscometric fixed points of glass. Recommendations for use in the determination of viscosity and viscometric fixed points
BS 7034:2
1988
Viscosity and viscometric fixed points of glass. Method for the determination of viscosity by rotation viscometers
BS 7034:3
1988
Viscosity and viscometric fixed points of glass. Method for the determination of viscosity by fibre elongation viscometer
BS 7034:4
1988
Viscosity and viscometric fixed points of glass. Method for the determination of viscosity by beam bending
BS 7034:5
1988
Viscosity and viscometric fixed points of glass. Method for the determination of working point by sinking bar viscometer
BS 7034:6
1988
Viscosity and viscometric fixed points of glass. Method for the determination of softening point
BS 7034:7
1988
Viscosity and viscometric fixed points of glass. Method for the determination of annealing point and strain point by beam bending
BS 7034:8
1988
Viscosity and viscometric fixed points of glass. Method for the determination of (dilatometric) transformation temperature
BS 7035
1989
Code of practice for socketing of stranded steel wire ropes
BS 7036:1
1996
Code of practice for safety at powered doors for pedestrian use. General
BS 7036:2
1996
Code of practice for safety at powered doors for pedestrian use. Straight and curved sliding doors and prismatic and folding doors
BS 7036:3
1996
Code of practice for safety at powered doors for pedestrian use. Swing doors and balanced doors
BS 7036:4
1996
Code of practice for safety at powered doors for pedestrian use. Low energy swing doors
BS 7036:5
1996
Code of practice for safety at powered doors for pedestrian use. Revolving doors
BS 7037:1
1988
Sampling plans for milk and milk products. Specification for inspection by attributes
BS 7037:2
1989
Sampling plans for milk and milk products. Inspection by variables
BS 7038
1988
Specification for rubber coolant hoses and tubing for use on private cars and light commercial vehicles
BS 7039
1989
Recommendations for dimensions of spindle ends and bushes, and for dimensions for the mounting of single-hole, bush-mounted spindle-operated variable capacitors, variable resistors and potentiometers for electronic equipment
BS 7041
1989
Specification for characteristics and calibration of hydrophones for operation in the frequency range 0.5 MHz to 15 MHz
BS 7042
1988
Specification for high security intruder alarm systems in buildings
BS 7044:1
1990
Artificial sports surfaces. Classification and general introduction
BS 7044:2.1
1989
Artificial sports surfaces. Methods of test. Methods for determination of ball/surface interaction
BS 7044:2.2
1990
Artificial sports surfaces. Methods of test. Methods for determination of person/surface interaction
BS 7044:2.3
1990
Artificial sports surfaces. Methods of test. Methods for determination of durability
BS 7044:2.4
1989
Artificial sports surfaces. Methods of test. Methods for determination of environmental resistance
BS 7044:2.5
1991
Artificial sports surfaces. Methods of test. Miscellaneous
BS 7044:4
1991
Artificial sports surfaces. Specification for surfaces for multi-sports use
BS 7061
1989
Specification for volume and file structure of compact read only optical disks (CD-ROM) for information interchange
BS 7063
1989
Specification for analogue audio disk records and reproducing equipment
BS 7066:1
1990
Wood preservatives. Laboratory method for determining the protective effectiveness of a preservative treatment against blue stain in service. Brushing procedure
BS 7066:2
1990
Wood preservatives. Laboratory method for determining the protective effectiveness of a preservative treatment against blue stain in service. Application by methods other than brushing
BS 7067
1990
Guide to determination and presentation of float and sink characteristics of raw coal and of products from coal preparation plants
BS 7068
1989
Specification for alternating pressure air mattresses
BS 7071
1992
Specification for portable residual current devices
BS 7074:1
1989
Application, selection and installation of expansion vessels and ancillary equipment for sealed water systems. Code of practice for domestic heating and hot water supply
BS 7074:2
1989
Application, selection and installation of expansion vessels and ancillary equipment for sealed water systems. Code of practice for low and medium temperature hot water heating systems
BS 7074:3
1989
Application, selection and installation of expansion vessels and ancillary equipment for sealed water systems. Code of practice for chilled and condenser systems
BS 7076:1
1989
Dimensions of gaskets for flanges to BS 1560. Specification for non-metallic flat gaskets
BS 7076:2
1989
Dimensions of gaskets for flanges to BS 1560. Specification for metallic ring-joint gaskets for use with steel flanges
BS 7076:3
1989
Dimensions of gaskets for flanges to BS 1560. Specification for non-metallic envelope gaskets
BS 7076:4
1989
Dimensions of gaskets for flanges to BS 1560. Specification for corrugated, flat or grooved metallic and filled metallic gaskets
BS 7077:2.2
1989
Dental handpieces and accessories. Accessories. Specification for coupling dimensions
BS 7078
1989
Method for determination of the electrical resistance to earth of an installed textile floor covering
BS 7079:0
1990
Preparation of steel substrates before application of paints and related products. Introduction
BS 7079:A3
2002
Preparation of steel substrates before application of paints and related products. Visual assessment of surface cleanliness. Preparation grades of welds, cut edges and other areas with surface imperfections
BS 7079:B8
2001
Preparation of steel substrates before application of paints and related products. Methods for the assessment of surface cleanliness. Field method for the refractometric determination of moisture
BS 7079:B10
2000
Preparation of steel substrates before application of paints and related products. Methods for the assessment of surface cleanliness. Field method for the titrimetric determination of water-soluble chloride
BS 7079:B12
2003
Preparation of steel substrates before application of paints and related products. Methods for the assessment of surface cleanliness. Field method for the titrimetric determination of water-soluble ferrous ions
BS 7079:F9
1999
Preparation of steel substrates before application of paints and related products. Specification for Staurolite
BS 7079:F10
2000
Preparation of steel substrates before application of paints and related products. Non-metallic blast-cleaning abrasives. Almandite garnet
BS 7080:1
1989
Guide to construction and use of 6.30 mm (0.25 in) magnetic tape cartridge for data interchange, using GCR recording at 394 ftpmm (10000 ftpi), 39 cpmm (1000 cpi). Mechanical, physical and magnetic properties
BS 7080:2
1989
Guide to construction and use of 6.30 mm (0.25 in) magnetic tape cartridge using GCR for data interchange, recording at 394 ftpmm (10 000 ftpi), 39 cpmm (1 000 cpi). Streaming mode
BS 7081:1
1989
Guide to construction and use of 6.30 mm (0.25 in) magnetic tape cartridge using IMFM for data interchange, recording at 252 ftpmm (6400 ftpi). Mechanical, physical and magnetic properties
BS 7081:2
1989
Guide to construction and use of 6.30 mm (0.25 in) magnetic tape cartridge for data interchange, using IMFM recording at 252 ftpmm (6400 ftpi). Track format and method of recording for data interchange in start/stop mode
BS 7083
1996
Guide to the accommodation and operating environment for information technology (IT) equipment
BS 7085
1989
Guide to safety aspects of experiments in which people are exposed to mechanical vibration and shock
BS 7086
1989
Glossary of terms for pneumatic tools
BS 7087:1
1995
Herbs and spices ready for food use. Specification for black and white pepper (whole and ground)
BS 7087:2
1995
Herbs and spices ready for food use. Specification for dried thyme (whole and ground)
BS 7087:3
1996
Herbs and spices ready for food use. Specification for dried sage (whole and ground)
BS 7087:4
1996
Herbs and spices ready for food use. Specification for cloves (whole and ground)
BS 7087:5
1996
Herbs and spices ready for food use. Specification for dried cumin (whole and ground)
BS 7087:6
1996
Herbs and spices ready for food use. Specification for coriander seeds (whole and ground)
BS 7087:7
1996
Herbs and spices ready for food use. Specification for dried fenugreek (whole or ground)
BS 7087:8
1996
Herbs and spices ready for food use. Specification for dried ginger (whole and ground)
BS 7087:9
1996
Herbs and spices ready for food use. Specification for dried marjoram (whole, rubbed and ground)
BS 7087:10
1996
Herbs and spices ready for food use. Specification for dried mint (whole, rubbed and ground)
BS 7087:11
1996
Herbs and spices ready for food use. Specification for ground paprika
BS 7087:12
1992
Herbs and spices ready for food use. Specification for dried basil (bouquets, rubbed and ground)
BS 7087:13
1992
Herbs and spices ready for food use. Specification for turmeric (whole and ground)
BS 7087:14
1992
Herbs and spices ready for food use. Specification for dried nutmeg and dried mace
BS 7087:15
1993
Herbs and spices ready for food use. Specification for cinnamon (whole and ground)
BS 7087:16
1993
Herbs and spices ready for food use. Specification for oregano (whole, rubbed and ground)
BS 7087:17
1993
Herbs and spices ready for food use. Specification for chillies (whole and ground)
BS 7087:18
1993
Herbs and spices ready for food use. Specification for dried rosemary (whole, rubbed and ground)
BS 7087:19
1994
Herbs and spices ready for food use. Specification for fennel seeds (whole and ground)
BS 7087:21
1995
Herbs and spices ready for food use. Specification for bay leaves (whole and ground)
BS 7087:22
1995
Herbs and spices ready for food use. Specification for dried mustard seeds (whole and ground)
BS 7087:23
1995
Herbs and spices ready for food use. Specification for dried caraway seeds (whole and ground)
BS 7087-24
1966
Herbs and spices ready for food use. Specification for dried pimento (allspice) (whole and ground)
BS 7087:25
1996
Herbs and spices ready for food use. Specification for dehydrated onion
BS 7087:26
1996
Herbs and spices ready for food use. Specification for dehydrated garlic
BS 7087:27
1997
Herbs and spices ready for food use. Specification for dried sesame seeds (dehulled)
BS 7087:28
1997
Herbs and spices ready for food use. Specification for dried tarragon (whole and ground)
BS 7087:29
1997
Herbs and spices ready for food use. Specification for dried whole dill seed, dill leaves and ground dill
BS 7088
1989
Specification for pneumatic tourniquet equipment
BS 7089
1989
Definition for nonwovens
BS 7096
1990
Guide to design and use of bank cards with a magnetic stripe that employs track 3
BS 7097
1990
Procedure for allocating an international securities identification number (ISIN)
BS 7098
1989
Method of formatting inter-bank telexes for messages relating to the transfer of funds or other financial messages
BS 7101
1989
Procedures for protecting authentic wholesale messages between financial institutions
BS 7102:1
1989
Recommendations for algorithms for use in banking message authentication. Data Encryption Algorithm (DEA)
BS 7102-2
1989
Recommendations for algorithms for use in banking message authentication. Message Authenticator Algorithm
BS 7110
1990
Guide to design and use of savings books with magnetic stripes for information interchange
BS 7111
1991
Guide to modes of operation for a 64-bit block cipher algorithm
BS 7112
1991
Procedures for achievement of interoperability and security by use of encipherment at the physical layer of OSI in telecommunication systems conveying automatic data processing information
BS 7114:1
1988
Fireworks. Classification of fireworks
BS 7114:2
1988
Fireworks. Specification for fireworks
BS 7114:3
1988
Fireworks. Methods of test for fireworks
BS 7116
1990
Specification for double sided pressure sensitive adhesive tapes
BS 7117:1
1991
Metering pumps and dispensers to be installed at filling stations and used to dispense liquid fuel. Specification for construction
BS 7117:2
1991
Metering pumps and dispensers to be installed at filling stations and used to dispense liquid fuel. Guide to installation
BS 7117:3
1991
Metering pumps and dispensers to be installed at filling stations and used to dispense liquid fuel. Guide to maintenance after installation
BS 7118:2
1989
Measurement of fluid flow: assessment of uncertainty in the calibration and use of flow measurement devices. Non-linear calibration relationships
BS 7119
1989
Specification for shock and vibration measurements: characteristics to be specified for seismic pick-ups